NEC's New I/O Virtualization Technology Enables Simultaneous Sharing of I/O Devices among Multiple Computers
Tokyo, - NEC Corporation (NEC; TSE: 6701) announced today the development of a new I/O virtualization technology that enables simultaneous sharing of I/O devices among multiple computers. This technology is a major extension of the ExpEther (*1) that virtualizes PCI Express switches over standard Ethernet. The technology provides scale-up capability to data center servers by flexibly...
Read More »
Networking Cable brings Ethernet to analog signal conditioners.
Providing DB25 male to 26-pin female IDC ribbon cable connection, Model 4001-110 interfaces rack of up to 16 3B or 5B modules, providing conditioned voltage signals from analog sensors to Ethernet I/O modules. Converting signal conditioners' outputs to digital data, Ethernet I/O modules can provide Modbus TCP/IP communication to PCs, PLCs, and other distributed control devices. Typical...
Read More »
Networking Cable brings Ethernet to analog signal conditioners.
Providing DB25 male to 26-pin female IDC ribbon cable connection, Model 4001-110 interfaces rack of up to 16 3B or 5B modules, providing conditioned voltage signals from analog sensors to Ethernet I/O modules. Converting signal conditioners' outputs to digital data, Ethernet I/O modules can provide Modbus TCP/IP communication to PCs, PLCs, and other distributed control devices. Typical...
Read More »
Dual-Channel Modem connects Ethernet devices over coax or UTP.
Featuring 2 standard BNC connectors, 2 terminal blocks, and 2 standard RJ-45 Ethernet connectors, Model CNFE2CL2MC allows Ethernet-based equipment to be connected over 75 W coaxial cable or unshielded twisted pair telephone wire. Unit can extend distances between devices to as much as 500 m on coaxial cable or up to 3,000 m on UTP. Featuring environmentally hardened design, modem operates in...
Read More »
Top Purchasing Considerations for Cold Storage Units
On-site cold storage is essential in a number of industries. A new walk-in cooler, walk-in freezer or refrigerated trailer is a major investment and having one that fits your specific needs is crucial.
Read More »
Dual-Channel Modem connects Ethernet devices over coax or UTP.
Featuring 2 standard BNC connectors, 2 terminal blocks, and 2 standard RJ-45 Ethernet connectors, Model CNFE2CL2MC allows Ethernet-based equipment to be connected over 75 W coaxial cable or unshielded twisted pair telephone wire. Unit can extend distances between devices to as much as 500 m on coaxial cable or up to 3,000 m on UTP. Featuring environmentally hardened design, modem operates in...
Read More »Wireless Gauge Interface offers plug and play operation.
Without requiring any tools, i-Wave allows plug-and-play changeover of mechanical gauge heads. StarLock locking device allows connection of new/existing gauges to wireless gauging. Able to work in severe shop floor conditions, wireless handle accommodates any mechanical gauge head featuring standard M10, M6, or M3,5 thread. Unit is protected against coolants and dust, and alkaline C batteries...
Read More »Wireless Gauge Interface offers plug and play operation.
Without requiring any tools, i-Wave allows plug-and-play changeover of mechanical gauge heads. StarLock locking device allows connection of new/existing gauges to wireless gauging. Able to work in severe shop floor conditions, wireless handle accommodates any mechanical gauge head featuring standard M10, M6, or M3,5 thread. Unit is protected against coolants and dust, and alkaline C batteries...
Read More »
I/O Link System connects RFID system to network. .
With IO-Link, users can connect complex devices, such as RFID processors, to industrial network via gateway using standard discrete wiring. Solution can replace I/O enclosure, 4 shielded cordsets, and 4-port RS232 PLC module with single IO-Link Expansion Module and four 3-conductor, non-shielded cordsets. Additional I/O points are made available by Expansion Module that can be used for analog...
Read More »
I/O Link System connects RFID system to network. .
With IO-Link, users can connect complex devices, such as RFID processors, to industrial network via gateway using standard discrete wiring. Solution can replace I/O enclosure, 4 shielded cordsets, and 4-port RS232 PLC module with single IO-Link Expansion Module and four 3-conductor, non-shielded cordsets. Additional I/O points are made available by Expansion Module that can be used for analog...
Read More »
Micro Air's Dust, Fume, Mist Collection Equipment Facilitate a Safe Work Environment
Dust, fume, and mist collectors from Micro Air promote a safer, more productive work environment. Our wide array of products are available to the industrial manufacturing sector for processes such as welding, cutting, grinding, blasting, and more. Check out our video to learn more.
Read More »
