Interfaces

Interfaces

Ethernet Switch connects five segments.

Stand alone FL Switch 5 TX Ethernet/Fast Ethernet unmanaged switch permits connection of up to five twisted pair Ethernet segments, supports both 10 Mbs and 100 Mbs transmission rates through autonegotiation, and supports either 1:1 or cross-over Ethernet cabling. Its alarm output can be used to externally monitor redundant power source. DIN-rail mountable module has industrialized housing.

Read More »
Industrial Ethernet Connectors meet IP67 watertight rating.
Interfaces

Industrial Ethernet Connectors meet IP67 watertight rating.

Variosub RJ-45 connectors are suitable for fast Ethernet transmissions at 100 Mbps in accordance with Class D or Category 5 of EN 50173. Protects against dirt and moisture, withstands adverse conditions associated with use on machinery and industrial installations, and protects RJ-45 contact insert. Connector is protected against forces pulling mounting and hood sides apart, pulling cables out of...

Read More »
Digital Control plugs into USB port.
Miscellaneous Controls

Digital Control plugs into USB port.

SeaPORT REL-16 provides 16 outputs for PC based control and industrial automation. Reed relay outputs provide reliable, long life, dry contact switch closures. Suited for low current applications less than 10 W, relays are normally open, and close when energized. Onboard removable screw terminals are provided to simplify wiring connections. It comes with assembled DIN rail mounting kit and...

Read More »
Rectifiers (Diodes)

Diodes and Receivers meet 10 Gigabit Ethernet specs.

Fabry-Perot (FP) and Distributed Feedback (DFB) laser diodes, indium gallium arsenide (InGaAs) avalanche photodiode (APD), and PIN receivers deliver performance needed by 10 Gigabit Ethernet, DWDM and SONET applications. Un-cooled FP and DFB laser diode chips meet OC192 SONET specifications. FP laser diode chip can transmit over distance of 600 meters, while DFB laser diode chip can transmit over...

Read More »
Touchscreen HMIs have NEMA 4/12 enclosures.
Touchscreens

Touchscreen HMIs have NEMA 4/12 enclosures.

HMI900 Series of operator interfaces consist of: Model HMI985, with 12.1 in. TFT display with 1900 touchpoints and 800 x 600 pixel resolution; Model HMI975, with 10.4 in. TFT display, and analog micromatrix touchscreen with 1200 touchpoints and 640 x 480 pixels; and Model HMI960, with 8.9 in. EL display and analog micromatrix touchscreen with 1000 touchpoints and 640 x 400 pixels. Units come with...

Read More »
Frequency Interfaces replace A/D cards.
Interfaces

Frequency Interfaces replace A/D cards.

TW Series offer alternatives to A/D cards on PLCs, computers, and data acquisition systems. TWI-FO and TWN-FO convert analog signal into linear-frequency output signal. They can be used with PLC to convert 4-20mA signal into frequency, allowing direct connection into PLC's digital input. Other models serve as interface between Trimec DP490 Flow Transducer and PLC, or have photodiode light sensor...

Read More »
Operator Interface supports application reuse/portability.
Interfaces

Operator Interface supports application reuse/portability.

JAGXTREME(TM) Operator Interface provides intuitive, user-centered graphical interface for weighing information. Graphical displays are constructed using Windows(TM)-based, object-oriented, configuration software and drop-in-place objects with user-definable properties. System information may be displayed using bar graphs, bitmaps, and simple animation. Interface is available in 3 enclosure...

Read More »
Interfaces

Ethernet Switches handle 8 or 9 channels.

Single-chip, 8-port KS8997 and 9-port KS8999 switch ICs can be used in 10/100 Ethernet DSL, cable, and wireless routers and gateway networks. Both support DiffServ and IEEE 802.lp to prioritize different classes of voice, video and data traffic. With port-based VLAN, devices allow user to establish VLAN groups for security between groups and applications. Devices handle up to 9 MACs, 8 PHYs,...

Read More »
Interfaces

Operator Interface is Ethernet-enabled.

OptoTerminal-G70 graphics-based operator interface is for use with company's SNAP Ethernet I/O and SNAP Ultimate I/O systems. It features 5.5 in. diagonal, 320 x 240 pixel, color touch screen; soft keys; and programmable speaker. Terminal is used to send commands and receive real-time data from plant floor equipment and other real world devices connected to hardware for purposes of automation,...

Read More »
3-Port Ethernet Module drives network applications.
Interfaces

3-Port Ethernet Module drives network applications.

Triple-port Ethernet module model Em104P-LAN100NT incorporates 3 Intel 82559 Ethernet controllers for flexible Ethernet networking capabilities at 10- or 100-Mbps data rates. It includes built-in 10-pin box header and RJ-45 connectors. Three definable diagnostic LEDs indicate operating status of network and module. Both 32-bit PCI-based PC/104-Plus and 16/8-bit ISA-based PC/104 interfaces are...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers