Inspection Equipment

MetraSCAN 3D R-Series System offers an accuracy of up to 0.030 mm.

MetraSCAN 3D R-Series System offers an accuracy of up to 0.030 mm.

MetraSCAN 3D R-Series System allows user to combine both optical measurements and industrial automation. Unit comes with industrial-grade tool changer, computers and touch screens, NEMA 12 certification, fully robotized calibration. Product delivers a resolution of up to 0.050 mm and features automatic calibration option.

Read More »
Radiant Demonstrates Advanced Vision for In-Line Electronics Assembly Verification at IPC APEX EXPO

Radiant Demonstrates Advanced Vision for In-Line Electronics Assembly Verification at IPC APEX EXPO

REDMOND, Wash. - January 31, 2018 - Radiant Vision Systems, a leading provider of high-resolution photometric imaging solutions, announces that it will demonstrate its new INSPECT.assembly system for in-line electronics assembly verification at booth #3815 during IPC APEX EXPO. The exhibition takes place February 27-March 1, 2018, at the San Diego Convention Center in San Diego, California,...

Read More »
ISO-Spector M1A AOI System comes with high-speed 3D SMT solder joints.

ISO-Spector M1A AOI System comes with high-speed 3D SMT solder joints.

ISO-Spector M1A AOI System features 25 mega pixel sensor and 69 x 69 mm Field of View (FoV) and delivers inspection of even 008004 components, leads and solder joints. Unit’s multiple Moiré fringe projections provide shadow free measurements heights up to 30 mm. System comes with 4 fully programmable side view high-res cameras for inspecting J-leads artificial intelligence for identifying...

Read More »
Press preview for Seica Inc. participation at Apex, San Diego, California, February 27, 28 - March 1, 2018, Booth 2323, San Diego Convention Center.

Press preview for Seica Inc. participation at Apex, San Diego, California, February 27, 28 - March 1, 2018, Booth 2323, San Diego Convention Center.

Haverhill, MA January, 2018. Following the winning philosophy which characterized its business in testing and assembly over three decades, based on the constant and rapid innovation of its solutions, Seica will attend the Apex 2018 exhibition with many new products. Products will complement some restyling’s of solutions presented in the past, almost completely renewing the portfolio of Seica...

Read More »
LVS-7510 Print Quality Inspection System comes with 1D/2D barcode verification.

LVS-7510 Print Quality Inspection System comes with 1D/2D barcode verification.

LVS-7510 Print Quality Inspection System is used to analyze label at print rates up to 254mm per second. Unit comes with blemish detection, data and code matching options. Product is suitable for consumer goods packaging, medical device manufacturing, pharmaceutical manufacturing and chemical manufacturing applications. LVS-7510 enables user to identify defects, control waste and helps to reduce...

Read More »
INSPECT.assembly Inspection System comes with CCD cameras.

INSPECT.assembly Inspection System comes with CCD cameras.

INSPECT.assembly Inspection System’s camera offers high-resolution CCD imaging up to 29 megapixels and grayscale sensitivity of 73.4 dB dynamic ranges. Unit is used to detecting defect in in-line assembly verification. Product is suitable for photometric measurement of light and color in displays and backlit components. INSPECT.assembly can be mounted on moving conveyer or inspection station.

Read More »
3Di Automated Optical Inspection Systems are equipped with overhead camera.

3Di Automated Optical Inspection Systems are equipped with overhead camera.

3Di Automated Optical Inspection Systems offer dual-motor drive system, linear scale and closed-loop functionality. Units feature high-speed (5,700mm2/sec), XY positioning of 3µm at 30’ and height repeatability below 2µm at 3Ơ. Product’s camera is integrated with CoaXPress interface. 3Di automated provides scalable resolutions of 7, 12 and 18µm for boards weighing 12kg.

Read More »
NORTEC® 600D Inspection Kit can read tube probe signals.

NORTEC® 600D Inspection Kit can read tube probe signals.

Used for detecting corrosion, pitting, cracks, wear and erosion in HVAC, feedwater heaters, condensers and evaporators, NORTEC® 600D Heat Exchanger Inspection Kit is equipped with 600D flaw detector. Kit consists of adaptors for eddy current probes (ECT), remote field (RFT) probes, and near field (NFT) probes. Enabling single user to inspect ferrous, non-ferrous, finned and un-finned tubing,...

Read More »
ABB FABTECH 2017 Exhibit Showcases the Collaboration, Simplicity and Digitalization that Allow Manufacturers to Most Efficiently Handle Increased part Variation

ABB FABTECH 2017 Exhibit Showcases the Collaboration, Simplicity and Digitalization that Allow Manufacturers to Most Efficiently Handle Increased part Variation

Leading edge robotic welding technologies also enhance safety, quality and productivity ABB will feature a broad range of advanced robotic welding technology designed to enhance safety, quality and productivity at FABTECH 2017, November 9th to 12th at McCormick Place in Chicago (Booth #B-23025). Metal Fabricators of all sizes are adopting robotic automation to maximize throughput, reduce costs...

Read More »
LSP Technologies Sells Laser Bond Inspection System to Northrop Grumman

LSP Technologies Sells Laser Bond Inspection System to Northrop Grumman

Dublin, Ohio, January 17, 2017 – LSP Technologies announces the sale of a Laser Bond Inspection (LBI) system to Northrop Grumman Corporation. Delivery of the equipment will be in early 2017. LSP Technologies’ LBI system is a nondestructive inspection (NDI) method for the structural validation of the bond strength of adhesively bonded joints in composites and other materials. LBI uses a...

Read More »

All Topics