Inspection Equipment

Eagle Meat and Poultry Experts on Hand at IPPE 2017
Inspection Equipment

Eagle Meat and Poultry Experts on Hand at IPPE 2017

Florida, Tampa, US, 31 January, 2017 - Eagle Product Inspection (Eagle), an expert in advanced x-ray product inspection and fat analysis systems, is demonstrating the benefits of inline meat and poultry inspection solutions at IPPE 2017. The rapidly evolving regulatory landscape demands that product safety be made a top priority, from the Food Safety Modernization Act (FSMA) to Hazard Analysis &...

Read More »
ECD Product Line Enhancements Underscore Continuous Improvement Philosophy
Inspection Equipment

ECD Product Line Enhancements Underscore Continuous Improvement Philosophy

January 10, 2017 – ECD has announced a series of upgrades and enhancements for its line of award-winning electronics manufacturing technologies, including new features for its SmartDRY™ Intelligent Dry Storage systems, M.O.L.E.® thermal profilers and OvenRIDER® NL2+ oven verification tool. All of these newly-upgraded products will be on display at the IPC APEX Expo in ECD booth # 2139....

Read More »
Saki Incorporates its 3D AOI and SPI Systems into Fuji America's Smart Factory Line
Inspection Equipment

Saki Incorporates its 3D AOI and SPI Systems into Fuji America's Smart Factory Line

Fremont, CA - 01 December 2016 - Saki Corporation, an innovator in the field of automated optical inspection equipment, has partnered with Fuji America to incorporate its 3D automated optical inspection (AOI) and 3D solder paste inspection (SPI) systems into Fuji's Smart Factory SMT line at its Vernon Hills, IL facility. Saki's inspection and measurement systems will be used to ensure...

Read More »
Inspection Equipment

Nevada UAS Test Site Leads Groundbreaking FAA UAS Detection at Airports Pathfinder Program Air Operation

DENVER, Nov. 22, 2016 - The Counter Unmanned Aerial Systems (cUAS) industry is gaining momentum as the Federal Aviation Administration (FAA) opens up the sky to public and commercial drone operators, and this week, the FAA and the Nevada Institute for Autonomous Systems (NIAS), managers of the FAA-designated Nevada UAS Test Site, teamed together with Northern Plains UAS Test Site to test...

Read More »
Tritan 365 Tri-365SBLC Inspection Lamp comes with built-in fans.
Inspection Equipment

Tritan 365 Tri-365SBLC Inspection Lamp comes with built-in fans.

Designed with white LED light, TritanT 365 Tri-365SBLC Inspection Lamp can illuminate dark work spaces. Featured with back light filters, product reduces output of wavelengths longer than 400 nm. With UV-A intensity of less than 5,000 µW/cm2 and 4 inch (10 cm) diameter coverage area at 15 inches (38 cm), unit offers Grip-mounted, three-way rocker switch for easy control of light sources and...

Read More »
Eagle Has Boundless Energy - Both Single and Dual - At Pack Expo 2016
Inspection Equipment

Eagle Has Boundless Energy - Both Single and Dual - At Pack Expo 2016

Florida, Tampa, US, 7 November, 2016 - Eagle Product Inspection (Eagle), a leading provider of physical contamination detection and quality assurance equipment, is showcasing a variety of single and dual energy inspection systems, in addition to offering a cruise giveaway, at Pack Expo 2016 – which runs November 6-9 in Chicago – on stand S-1623 X-ray inspection is widely recognized as the...

Read More »
300GMSL inspection machine offers surface finish measurements.
Measuring Equipment

300GMSL inspection machine offers surface finish measurements.

Including video telephony, note pad and voice mail messaging capability along with QR/bar code reading, 300GMSL multi sensor inspection machine enables intuitive interface with simple input screens for programming workpiece data. Capable of performing tactile probing, unit supports traditional gear feature data collection on spur and helical gears, spiral and straight bevel gears up to 300mm in...

Read More »
SG46 3D scanhead provides stability in temperature variations.
3D Scanners

SG46 3D scanhead provides stability in temperature variations.

With a scanning speed gain of up to 10 times, SG46 3D scanhead offers dynamic sensing range to scan wider range of part types and surface finishes. Featuring positive lock mounting mechanism for easy installation, device offers compatibility with existing shapegrabber scanners. Enabling tolerance to temperature, unit features laser, lens and imager to capture finer details. Device is suitable for...

Read More »
Inspection Equipment

3D Inspection Systems from Viscom Inspect Complex Transmission Controls at WABCO

Duluth, GA – WABCO has successfully optimized production quality on its prototyping line with the S3088 SPI and S3088 ultra from Viscom. Viscom Quality Uplink manages the data networking for WABCO, which is known for its ABS systems. As part of an ongoing development partnership since 2014, WABCO has acquired a prototype line in stages at its Lindener Hafen location in Hanover, Germany. The...

Read More »
Cirtronics Installs Powerful 3D AOI Solution for Accurate Inspection Results
Inspection Equipment

Cirtronics Installs Powerful 3D AOI Solution for Accurate Inspection Results

Duluth, GA, October 2016Â- - Viscom is pleased to announce that it has been selected by Cirtronics for its 3D AOI. Based in Milford, NH, Cirtronics has added an S3088 ultra blue AOI system to each of their production lines in its 175,000 sq. ft. manufacturing space. The Cirtronics team conducted extensive evaluations on the S3088 ultra blue and competitive systems and found the Viscom units...

Read More »

All Topics