Inspection Equipment

Semiconductor Processing Equipment

FEI Launches Three New Tools for Next-Generation Semiconductor Manufacturing

New solutions are designed to address the challenges of 7nm technology node metrology and defect/failure analysis.Â-  Hillsboro, Ore. - FEI (NASDAQ: FEIC) announced today the release of three new tools for process control and defect/failure analysis in advanced semiconductor manufacturing. Two of the tools are specifically targeted at the 7nm node, and all are designed to allow manufacturers...

Read More »
Nordson DAGE Will Show the New Quadra(TM) 7 X-ray Inspection System for the First Time at SEMICON West
Inspection Equipment

Nordson DAGE Will Show the New Quadra(TM) 7 X-ray Inspection System for the First Time at SEMICON West

The future ofÂ-  X-ray image resolution, reliability and performance Aylesbury, Buckinghamshire, UK — Nordson DAGE, a division of Nordson Corporation (NASDAQ: NDSN), will exhibit in Booth #5844 at SEMICON West, scheduled to take place July 12-14, 2016 at the Moscone Center in San Francisco, CA. The leader in X-ray inspection for electronics, Nordson DAGE will show its 4th generation,...

Read More »
Maintaining High Quality with Surface Protection for Precision Parts
Laser Cutting Services

Maintaining High Quality with Surface Protection for Precision Parts

The goal at A-Laser is to offer the highest quality precision parts manufacturing and reduce complex design requirements by utilizing advanced technologies including Infrared, Ultra Violet and CO2 laser systems.Â-  To ensure this high quality, A-Laser has a dedicated Quality Control team that inspects every part or project before it leaves the facility. Many of the parts then become pieces...

Read More »
Underwater/Air Laser Scanners optimize camera inspections.
Barcode Scanners / Readers

Underwater/Air Laser Scanners optimize camera inspections.

Designed to attach to camera, Nuclear NM800DA and Non-Nuclear M800DA Distance and Angle Laser Systems accurately measure position relative to target, displaying distance, pitch, and yaw. With demonstrated accuracy of 0.005 in. or better, scanners enable plant operators to consistently capture precise as-built measurements that are critical to successful design of modification and replacement...

Read More »
Robot-Guided System detects defects on shiny surfaces.
Inspection Equipment

Robot-Guided System detects defects on shiny surfaces.

Offering alternative to manual inspection, reflectCONTROL Automation provides high-speed, automatic surface inspection of shiny/painted parts with complex geometries. System projects striped pattern onto measurement object. Defects cause deviations from striped pattern which are recorded by cameras and evaluated by software. Deflectometry sensor, which consists of monitor for striped pattern...

Read More »
Miscellaneous Software

NDT System assesses pipeline integrity. .

With Pipecheck™ v3.3, NDT service companies and pipeline operators can quickly detect and characterize both internal and external pipe defects to determine level of integrity and remaining service life. Offering traceable results, system provides dent size calculations, feature for corrosion classifications, automatic anomaly vs cluster classifications, and advanced strain calculations,...

Read More »
Key Technology Showcases Next-Generation VERYX(TM) Digital Sorters at INC World Nut and Dried Fruit Congress
Food Processors

Key Technology Showcases Next-Generation VERYX(TM) Digital Sorters at INC World Nut and Dried Fruit Congress

Key Technology is showcasing its next-generation VERYX™ digital sorters at INC World Nut Â- Dried Fruit Congress. With highly innovative industry-first advancements such as multi-sensor Pixel Fusion™ and the highest resolution 4-channel cameras and laser sensors available on a digital sorter, VERYX reliably identifies sub-millimeter-size FM and defects. It offers an unprecedented ability...

Read More »
3D Scanners

Underwater Laser Scanner Used for 3D Measurements of Steam Dryer

Renton, WAÂ- – A Newton Labs’ NM200UW Underwater Laser scanner captured precision as-built dimensions at a Midwest Nuclear Facility during a recent spring outage. A team of engineers, supported by Newton Labs, performed 3D laser scanning on the four vessel support brackets and the four associated steam dryer seismic blocks. “Newton is proud to have played such a critical role in this...

Read More »
Dimensional Inspection Services Provider Q-PLUS Labs, Inc. to Exhibit at 2016 Space Tech Expo
Engineering Software

Dimensional Inspection Services Provider Q-PLUS Labs, Inc. to Exhibit at 2016 Space Tech Expo

Irvine, CA – Q-PLUS Labs Inc., a premier full service dimensional measurement and inspection laboratory and distributor of measuring and inspection equipment systems and accessories, announces it will be an exhibitor at SpaceTechExpo in Pasadena, CA. The show’s exhibition hall will have exhibits “covering satellite systems, launch vehicle and spacecraft design, engineering, testing, and all...

Read More »
ASC International to Exhibit 3D SPI/AOI at SMTA Michigan
Inspection Equipment

ASC International to Exhibit 3D SPI/AOI at SMTA Michigan

MEDINA, MINNESOTA - ASC International, a leading manufacturer of 3-D solder paste inspection (SPI) and automated optical inspection (AOI) systems, today announced that it will exhibit at the SMTA Michigan Expo Tech Forum, scheduled to take place Thursday, May 19, 2016 at Laurel Manor. ASC International will offer live demonstrations of the VisionPro M500 during the expo. Designed with...

Read More »
How SpinSelect Can Save You Time and Money
Sponsored

How SpinSelect Can Save You Time and Money

Thanks to the unique SpinSelect™ Multi-Pocket selectable quick change tool holder, it's time to rethink the range, complexity and volume of parts that your lathe can produce. Our Spin-Select™ tool was created to increase productivity and consistency by decreasing downtime associated with lathe cutting tool and insert setups or changeovers. This product is a game-changer for the industry and we're pleased to show you why.

Read More »

All Topics