Inserts are designed for machining stainless steel.
Cutting Tool Inserts

Inserts are designed for machining stainless steel.

KC9225(TM) inserts reduce chip hammering and built-up edge conditions, preventing insert damage in applications demanding continuous to lightly interrupted cuts at high cutting speeds. Deformation resistance combined with sharp cutting edges makes units suitable for machining austenitic stainless steels, when machining at speeds in excess of 550 sfm. Applications include medical and food...

Read More »
Insert Grade is suited for steel turning.
Cutting Tool Inserts

Insert Grade is suited for steel turning.

Providing high metal removal rates and process stability in steel turning applications, Model GC4205 offers roughing to medium- and semi-finishing, and is designed for applications where high cutting temperatures are generated. It includes option for turning hard materials with HB greater than 270, and allows cutting speeds of more than 800 fpm. Unit features improved crater wear and plastic...

Read More »
Indexable-Insert Cutters suit large spur and helical gears.
Other Milling Cutters

Indexable-Insert Cutters suit large spur and helical gears.

Employing carbide substrates and coatings, OPTI-CUT(TM) Series is designed for gear gashing, shaping, and hobbing. Wear is accommodated by indexing inserts to new cutting edge, with 4 edges available before insert needs to be replaced. For secure clamping, insert screw clamping system uses angled clamping screws rather than screws that clamp at right angles to insert. Cutters are suited for...

Read More »
Fullcut Endmill minimizes cutting resistance.
End Mills

Fullcut Endmill minimizes cutting resistance.

Expanding capabilities in multi-functional milling, Straight Shank FCR optimizes ramping as well as helical-, shoulder-, and plunge-milling operations. Sharp cutting edges of indexable insert retain strength due to eccentric relief angle for each cutter diameter. Straight Shank FCR is available in Â-¾, 1, and 1¼ in. shank diameters.

Read More »
Insert Grades enable turning of exotic materials.
Cutting Tool Inserts

Insert Grades enable turning of exotic materials.

Featuring Super ZX multi-layered coating, AC510U and AC520U are available in both molded and ground insert types. Coating consists of ultra-thin layers of TiAln and AlCrn, alternately stacked up to 1,000 layers for wear resistance. AC510U grade is suited for finish turning of exotic materials, while AC520U is intended for roughing and medium cut machining applications.

Read More »
Electrical Insert features axial screw termination.
Electric Connector Inserts

Electrical Insert features axial screw termination.

Able to be combined with wide range of Han 3A hoods and housings, Han® Q2/0 insert enables termination for wires from 12-10 AWG. Device features 2 + PE contact configuration complemented by coding system that prevents incorrect mating. Designed to withstand up to 830 V, it is suited for applications found in decentralized power supplies, lighting and signaling equipment, and with...

Read More »
Electrical Inserts are designed for fiber optic networks.
Electrical Connectors

Electrical Inserts are designed for fiber optic networks.

HARTING PushPull LC Duplex integrates PushPull technology with inserts for fiber optic systems. Integration of standard LC fiber optic connectors, in single-mode and multimode, is suitable for harsh outdoor environments. Robust interfaces also offer vibration and IP 67/65 protection as standard. Connectors are suited for applications such as FTTA (Fiber To The Antenna), FTTH (Fiber To The Home),...

Read More »
Fastening Alternatives to Adhesives or Rivets
Fasteners

Fastening Alternatives to Adhesives or Rivets

SI® threaded inserts provide strong, reusable metal threads in plastics to allow for subsequent access to assemblies when required. These brass, stainless steel, or aluminum threaded inserts serve as practical alternatives to permanent joining methods, such as adhesives or rivets. Components can be removed and re-attached quickly and easily utilizing mating hardware. Applications include...

Read More »
Insert allows for pre-positioning in poured concrete decks.
Threaded Fastener Inserts

Insert allows for pre-positioning in poured concrete decks.

Designed to attach hanger rods or seismic bracing attachments in metal deck formed concrete, Figure 150 Wing-It deck insert features steel flange nut that bites into metal decks to ensure no tipping of anchor, before or during concrete pour. It attaches to various shaped holes including cut, drilled, punched or burned hanger rods and is available in sizes ranging from 3/8 to 7/8 in. It can be...

Read More »
Cutting Tool Inserts

Solid Carbide Gripper Pads & Inserts Offer Long Wear Workholding

2/13/08 Fairlane Products (Fraser, MI) has expanded its lineup of workholding and fixturing components with the manufacture of a wide range of solid carbide, serrated and smooth gripper pads and inserts, easily replaceable within workholding and positioning devices. The solid carbide construction, made from high impact grade carbide, provides toughness and long service life, helping to protect...

Read More »
Vector® Sports Training Ball Offers Visible Point of Contact
Sponsored

Vector® Sports Training Ball Offers Visible Point of Contact

Our goal is to help every athlete derive maximum enjoyment from their sport and become a better player. We offer a line of innovative training tools that combine cutting-edge technology and out of the box thinking to deliver an unbeatable competitive advantage. The Vector® Sports Training Ball is just another example of our commitment to innovation. To learn how the Vector® is helping ballplayers everywhere, see our video.

Read More »

All Topics