New Inserts Products

Cutting Tool Inserts last 40% longer than before.

CoroCut(R) parting and grooving tools provide good surface finish and have 20 to 40% longer tool life than previous tools. They withstand high axial cutting forces, maximize feed without vibration, and work on materials ranging from aluminum to hardened steels and heat resistant super alloys (HRSAs). Tools are available in Grade H10 carbide, in PVD-TiAIN coated carbide grades, and in four...

Inserts combine grooving and turning.

GROOVE 'N TURN(TM) inserts are available in 2 sub-micron grain carbide grades, DM-2(R) for steel and interrupted cutting, and DM-5(R) for aluminum and other non-ferrous alloys. Groove width sizes include .020, .030, .040, .060, .080, .100, and .125 in. with either sharp corners or .007 in. corner radius. Uncoated and TiN coated inserts are in stock. TiCN, TiAIN and diamond coatings are also...

Ceramic Insert Grade works with cast iron.

Fine-grain, silicon-nitride Quantum Q60 is formulated for high-speed rough turning and both rough and finish milling of cast irons. Speeds range from 1000 to 3800 sfm depending on depth of cut. Q60 is available in all types of turning and milling geometries. For finish turning, wiper radius insert geometry is available.

Castings reduce road renovation time.

Final Cut castings eliminate need for pavement removal around street castings. Cover and rim elevation of manholes, catch basins, and hand holes can be raised by 1 1/2 in., regardless of thickness of cover. Cast iron construction provides corrosion resistance and durability. Combination of Final Cut rim, riser and cover allows use of BMPs for control of erosion and sedimentation.

Considerations for Choosing a Plastic Injection Molder

Choosing a plastic injection molder is no small decision. There are a number of factors that play into your selection, and it's important to consider them all to ensure you find the plastic injection molding company that suits your unique needs. This eBook is your guide to identifying those factors to help you make an informed decision.

Brass Inserts have hexagonal heads.

Series 40 through-hole and Series 44 blind-end hexagonal, molded-in, brass inserts are suitable for placement in plastic molds prior to plastic injection. They do not require specialized insertion tools, and are manufactured to simplify orientation and placement onto mold core pins. Hexagonal head provides bi-directional torque resistance and large undercut provides high-tensile strength.

Turning and Milling Inserts are PVD coated.

SpectraTurn(TM)and SprectraMill(TM) inserts are coated with TiAln or AlTiN for edge strength and wear resistance. Heat produced in cutting process is carried away by chip. TiAlN coated insert grades are suitable for dry milling and for high-speed turning. AlTiN coated inserts are ideal for milling titanium and titanium alloys.

Coil Inserts do not require tang removal.

Kato Tangless(R) CoilThread(R) high-tension coil inserts are installed with hand, air-driven or electric tools featuring head that grips and drives insert. Bi-directional design eliminates need to orient each part, and does not require special tang break-off and tang removal tools. Inserts shrink when installed, and spring-like tension of coil locks inserts into place.

Reverse Expansion Insert presses into plastic hole.

Suitable for strengthening plastic joints, Series 18 brass reverse expansion insert is used in applications where bolt enters insert from headless end rather than from headed end. Its head provides high level pull-through resistance and its diamond knurl provides directional torque resistance for bolt installation. Unit does not require any specialized insertion tools, so it can be installed by...

Metal Thread Inserts fit wood and composition board.

Three metal thread inserts install without need for special tools. Knife thread inserts, available with coarse and fine internal threads, furnish holding power in hard woods such as oak, maple, and mahogany. Finsert thread inserts provide strong metal threads in softer materials, and prevent splintering, splitting, and thread pullout. Hex Drive thread inserts are for soft materials such as pine,...

Ceramic Inserts triple cast iron milling productivity.

Fix Perfect ceramic inserts have 8 true cutting edges and run 3 times faster in cast iron milling operations than conventional carbide inserts. Inserts are made of Kyon3500 ceramic that has shock resistance needed to perform roughing operations on cast iron at very high speeds, chiploads, and depths of cut. On-edge or tangentially mounted insert puts 1/2 in. of carbide behind cutting edge of 0.5...

Does Your Parking Lot Make a Good First Impression?

To enhance its appearance by removing oil stains, Terminator-HSD uses micro bacteria to remove the stain without harsh chemicals, acids, or detergents. Check out the video to learn more.