Seco to Highlight New Tools Developed Around Modern Materials at IMTS 2014
Thread Mills

Seco to Highlight New Tools Developed Around Modern Materials at IMTS 2014

TROY, Mich.Â- – At IMTS 2014 in booth W-1564, Seco Tools, LLC will unveil several new milling, turning, threading and tool holding products that were developed with material advancements in mind, including a square shoulder cutter that enhances side-milling operations, a multi-edge system that meets the industry's demand for narrow cutting-edge grooving and parting-off tools, an insert...

Read More »
Tooling System supports broaching applications.
Cutting Tool Inserts

Tooling System supports broaching applications.

Comprising single point inserts and holders, Minute Man Tooling System is suited for CNC lathes and machining centers as well as conventional lathes, shapers, and slotting machines. System supports grooving, toothing, positioning, and timing of internal keyways and cutting keyways in tapered bore and cornering operations. Users can complete broaching applications as additional step while part...

Read More »
Round Insert suits medium- to heavy-duty roughing operations.
Cutting Tool Inserts

Round Insert suits medium- to heavy-duty roughing operations.

Specifically designed for roughing solid railroad wheels and other forged parts, Tiger•tec® Silver HU6 Indexable Insert has coating that maximizes cutting speed and tool life. Insert's geometry features specially formed chip dimples for optimal chip formation, facilitating chip breaking in required area. Available in diameters from 10–32 mm, insert comes in 3 grades for steel...

Read More »
Feedblock Tuning Inserts can be adjusted during co-extrusion.
Inserts

Feedblock Tuning Inserts can be adjusted during co-extrusion.

Tuning inserts for Ultraflow™ I feedblock let manufacturers of film and sheet reduce downtime and material waste while permanent flow inserts are prepared. Products also promote precision in ultimate thickness profiles of each layer across die width. Using this product, processors can maintain production while adjusting until target profile is achieved and matching permanent insert can be...

Read More »
Turning Inserts offer smooth cutting and wear resistance.
Cutting Tool Inserts

Turning Inserts offer smooth cutting and wear resistance.

Available inÂ- 6 grades for turning stainless as well as grades for steels and cast irons, Beyond™ MR (medium roughing) inserts feature smooth cutting action and stable edge performance that accelerate cycle times and extend tool life. Geometry maximizes smooth cutting and chip flow while minimizing stress, and positive rake angle helps control degree of cutting forces and promotes...

Read More »
Seco Canada Covers All Cutting Tool Bases at MMTS 2014
End Mills

Seco Canada Covers All Cutting Tool Bases at MMTS 2014

New Seco and Niagara milling, turning and holemaking products on display in booth 427 TROY, Mich.Â- – At MMTS 2014, May 12 – 14 at Place Bonaventure Montreal, Quebec, Seco Tools Canada will meet the increased productivity and tight tolerance demands of manufacturers across all industry segments by showcasing a broad selection of new milling, turning and holemaking solutions from its Seco...

Read More »
Insert Grade offers wear resistance for cast iron milling.
Cutting Tool Inserts

Insert Grade offers wear resistance for cast iron milling.

Equipped with Inveio™ technology, which uses uni-directional crystal orientation, GC3330 Insert Grade offers endurance, predictability, and extended tool life. Product is suitable for both dry and wet cast iron milling, as well as for both grey and nodular cast iron materials. GC3330 is available for variety of milling cutters for face-, shoulder-, profile-, high feed-, and parting and grooving...

Read More »
Medium Roughing Inserts cut stainless steels.
End Mills

Medium Roughing Inserts cut stainless steels.

Suitable for wide range of workpiece materials, but optimized for stainless steels, Beyond™ MR Inserts feature unique geometry that maximizes smooth cutting and chip flow. Geometry of chip step is designed in continuous curve so that alternating stresses are reduced and uniform chip forming occurs. High positive rake angle works with smoothly curved cutting edge to reduce cutting forces. In...

Read More »
Inveio(TM) Setting the Standard for Steel Turning and Cast Iron Milling
Cutting Tool Inserts

Inveio(TM) Setting the Standard for Steel Turning and Cast Iron Milling

On March 3rd Sandvik Coromant will introduce new insert grades for steel turning and cast iron milling with Inveio. This technical breakthrough in material science gives these inserts exceptional wear resistance and tool life. In today's manufacturing, predictability is becoming increasingly important. Production that runs smoothly, without unexpected interruptions, allows for secure lights out"...

Read More »
Grooving and Parting System employs positive locking inserts.
Cutting Tool Inserts

Grooving and Parting System employs positive locking inserts.

Featuring self-clamping, single edge grooving inserts with positive-locking integration in tool insert seat, Walter Cut SX System optimizes both turning and milling operations. Positive locking keeps inserts secure and accurately seated when subjected to heavy load in feed direction. Available in widths from 2.0–6.0 mm, groovingÂ- inserts come in Tiger•tec® Silver PVD cutting...

Read More »

All Topics