Inks

Inks

Ink Module works on single or dual press consoles.

TA-RIM remote ink module replacement is for use with Harris Telecolor I press console. Design allows for faster ink settings and assists in zeroing fountains. TouchConsole user interface allows pressmen to operate system without manual. TA-RIM may be coupled with EPLEX Press Presetting System to enable older version presses to be preset using CIP3 digital information.

Read More »
Inks

Printer Inks refill Hewlett-Packard cartridges.

Ink set, for rechargers and kit manufacturers, includes Super Pigment Black for use in 28 and 56 cartridges; Cyan, Magenta, and Yellow inks for use in 27 and 57 cartridges; and Photo Cyan, Photo Magenta, and Photo Black for use in 58 cartridge. Inks are formulated for full compatibility with HP brand inks. They are packaged in pint, gallon, 5-gal, and 55-gal containers.

Read More »
Ink Jet Coder prints on various substrates.
Inks

Ink Jet Coder prints on various substrates.

Hot-melt Model 5200SC prints real-time and variable information as well as readable bar codes. Capable of printing 400+ ft/min, it has print swath of 2.56 in. and multiple time and date formats. Touch Dry® 5106 ink adheres to films, rigid plastics, shrink wraps, and coated inner cartons. Non-toxic, environmentally friendly ink contains no solvents. Touch Dry 5005 and 5106 offer smudge and...

Read More »
Ink suits small- and large-character printers.
Inks

Ink suits small- and large-character printers.

Suited for use in ink-jet printers, 5005 Series Touch Dry® hot-melt ink dries on contact with substrate, resulting in print that never weeps and high-definition code. Black ink provides darkness at low-density settings, smudge and abrasion resistance, and package-to-package offset resistance. Ink works with company's 5200, 5200SC, and 5400 ink jet printers.

Read More »
Inks

Conductive Ink suits plated through hole applications.

Type 122-22 screen printable, electrically conductive ink and coating maintains stable viscosity during all application methods and has low odor. It adheres to FR2, FR3, and FR4, printed circuit board substrates, as well as Kapton, Mylar, and glass. Product is resistant to abrasion, scratching, and thermal aging. It can be cured for 30 min at 70°C followed by post cure of 30 min at...

Read More »
Inks

Intense Black Ink for refillable inkjet cartridges.

Super Pigment line of black ink for refilling inkjet cartridges made by Hewlett-Packard and Lexmark prints intense black on coated and uncoated papers, and on low-cost copy papers. Ink dries quickly, is waterproof when dry, does not clog print nozzles, and starts printing immediately. Ink is available packaged in pint, gal, 5 gal, and 55 gal containers. Ink fits HP 51629A, C6614A, 51645A, and...

Read More »
Ink Kits fill ink jet cartridges.
Inks

Ink Kits fill ink jet cartridges.

Kits refill black and color cartridges for Epson Stylus Color C60, C50, 777 and 680 printers. Kit ESC17RBK contains enough black ink to refill Epson's T017, T026, and T028 black cartridges 5 times. Kit ESC18RC contains enough cyan, magenta, and yellow inks to refill Epson's T018 and T029 color cartridges 5 times. Cartridges contain lockout chips that prevent them from being used once original ink...

Read More »
Inks

Silicone Ink retains flexibility in low temperatures.

115-08 electrically conductive, silicone-based ink and coating is suitable for dip coating and spraying. Its temperature range is from -180 to 250° C. Suitable for EMI/RFI shielding applications, 115-08 resists cracking, and adheres to silicone substrates. Volume resistance is rated at 0.00012 Ohm-cm and sheet resistivity is 0.05 Ohm/sq/mil. Non-solderable ink is thermally stable to...

Read More »
Security Kit marks devices to thwart thieves.
Inks

Security Kit marks devices to thwart thieves.

Secure Marking Kit leaves invisible identification mark on servers, PCs, laptop computers, software CDs and other valuable office or personal assets. Kit includes hand held ultraviolet lamp, 3 UV marking pens, equipment inventory form and security labels. UV pens can mark wood, plastic, metal, glass, cloth and paper. UV lamp illuminates identifying marks. Kit comes with CD containing 38 security...

Read More »
Inks

Conductive Ink prints onto components and cables.

Electrically conductive Type 102-05F screen printable ink, coating and adhesive can be printed onto ribbon cables, flex circuits and other components to provide EMI/RFI shielding. It bonds to Indium Tin Oxide (ITO) sputtered surfaces and can be applied as bus bars onto ITO sputtered surfaces. It adheres to glass, mylar, kapton, ultem and other surfaces. Applications include EMI/RFI shielding,...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers