Injectors

New Acid-Away Pro Injector is Formulated for All Refrigeration Oils
Injectors

New Acid-Away Pro Injector is Formulated for All Refrigeration Oils

Acid-Away Pro Injector is designed for eliminating acid in residential, commercial refrigeration and air-conditioning systems. The unit consists of 44 ml copper reservoir with a 1/4 in. (high side) standard brass connection fitting and 1/4 in. (low side) features a Schrader valve brass connection fitting. The Acid-Away product changes acid into a neutral, non-corrosive substance and is used for...

Read More »
Mirador™ Chemical Injection Control and Diagnostic Module Provides Greater Monitoring and Control Capabilities over the Chemical Injection Process
Injectors

Mirador™ Chemical Injection Control and Diagnostic Module Provides Greater Monitoring and Control Capabilities over the Chemical Injection Process

Corpus Christi, TX, December 5, 2017 - DCiii, LLC introduces the Mirador™ Chemical Injection Control and Diagnostic Module that provides greater remote control and diagnostic monitoring capabilities over the chemical injection process for reduced waste and production costs. Operating on an open-based platform with Modbus RTU communication protocol, the Mirador™ seamlessly integrates with...

Read More »
Injectors

TREE I.V. Injector System comes with Hex PDS™.

Delivering an injection speed of up to 120 lb/in., FSeries TREE I.V. System features built-in expansion port Hex Parallel Distribution System. Reducing injection time, system’s fill port on the bottle cap allows the bottle to be filled without removing cap assembly. Featuring ¼ turn ball for quick open and close, unit’s main cap comes with master needle valve.

Read More »
Fanuc Roboshot SI-20A Secondary Injection Unit is equipped with HMI control.
Injectors

Fanuc Roboshot SI-20A Secondary Injection Unit is equipped with HMI control.

Having 0.63 oz. of maximum shooting capacity, Fanuc Roboshot SI-20A vertically mounted Secondary Injection Unit provides high molding performance and sustainability. Compatible with ROBOSHOT Alpha and B-Series injection molding machines from 50 ton to 300 metric tons, SI-20A can be operated from operation screen of Roboshot. Featuring rotary table,SI-20A can be linked to ROBOSHOT-LINKi.

Read More »
Injectors

Chillers LIXSHOOTER Injectors and ACCU-CHILL provide hygienic mixer and automated box chilling.

Providing chilling solutions for processors that need to maintain temperature avoiding food contamination, Linde’s LIXSHOOTER Injectors and ACCU-CHILL automated box chiller are both hygienically designed and keep temperature control. Featuring dual cryogen option, LIXSHOOTER Injectors switches between CO2 and LIN. ACCU-CHILL uses CO2 snow to chill food in boxes on demand. Meat, poultry,...

Read More »
Midspan PoDM++ Injector powers simple DM systems.
Power Distribution Systems

Midspan PoDM++ Injector powers simple DM systems.

DigitalMedia™ Ultra Midspan PoDM++ Injector (DM-PSU-ULTRA-MIDSPAN) provides single-point midspan solution for simultaneously delivering power over extended distances via DM® cable to both upstream and downstream DM devices. Output power capacity supports PoDM++ powered devices, and dual RJ45 connectors are provided for HDBaseT® and DM signal pass-through without affecting video or...

Read More »
Eliminate Odor & Toxic Gases at Animal Waste Lagoons
Odor Control Equipment

Eliminate Odor & Toxic Gases at Animal Waste Lagoons

WENDELL, N.C.- Odor and toxic gas problems at swine production farms are an old and persistent problem that effect surrounding areas. Some argue that there are health hazards, pollution problems and quality of life issues in the affected areas. The basic problem for the farmer is that they do not have a good method to add dissolved oxygen to the wastewater in the lagoons to eliminate the odor and...

Read More »
Standard Motor Products Releases 213 New Parts for Standard® and Intermotor®
Miscellaneous Controls

Standard Motor Products Releases 213 New Parts for Standard® and Intermotor®

NEW YORK - Standard Motor Products, Inc. (SMP) announces the addition of 213 new part numbers to its Standard® and Intermotor® lines. The release spans 49 product categories and expands coverage through the 2016 model year with more than 100 million additional VIO. SMP continued to make expansions to its diesel program, with the introduction of a diesel fuel injection harness, diesel...

Read More »
Chain and Bearing Lubricators

High-Pressure Grease Injectors withstand rugged environments.

Intended for use with automatic lubrication systems in such heavy-duty applications as mining and construction, GL-1™ X and XL offer hex-head nut that lets users adjust lubricant output. Both single-piece injectors, manufactured with fully enclosed press fittings and without anyÂ- vent holes, provide years of reliable operation in harsh operating environments. Design allows for stand-alone...

Read More »

All Topics