Inhibitors

Coatings

Non-Stick Cartridge Heater Coating eases removal after long-term use.

Bonded directly to cartridge heater sheath, Duraslik(TM) Coating acts as corrosion inhibitor and solid lubricant when heater is inserted into drilled hole and energized. Product allows heater to be removed with relative ease after long-term use, provides optimal heat transfer characteristics, and eliminates need for secondary release agents prior to insertion.

Read More »
Inhibitors

Caution: Rust Ahead -- Precision Finishing, Inc. Combats Corrosion Costs

Sellersville, PA - The warm temperatures make the summer months a great time for outdoor BBQs and lazy days at the beach. However, high heat and humidity also means rusty parts and manufacturing challenges for vibratory and barrel finishing departments. Fortunately, Precision Finishing Inc. realizes that process methods that are satisfactory during other seasons are often inadequate during the...

Read More »
Corrosion Preventative contains no VOCs.
Coatings

Corrosion Preventative contains no VOCs.

Applied to wet or dry metal surfaces, DRI TOUCH® Non-VOC forms colorless dry-to-touch protective film that resists atmospheric humidity and corrosion. Pale, amber liquid has 248°F flash point and film thickness of 0.15 mil, providing effective coverage of 1,500 sq ft/gal. Rated for 100-150 hr salt spray and 600+ hr humidity protection, DRI TOUCH Non-VOC meets water displacement test...

Read More »
Rust Preventive includes red indicator dye.
Coatings

Rust Preventive includes red indicator dye.

Designed to protect molds up to 2 years under normal conditions, Mold Shield delivers dry mist that will not penetrate into moving mold parts, including ejector pin holes, slides, and cams. Red indicator dye enables users to see where they have sprayed, what is protected, and what has been missed. Non-silicone, non-wax formulation seals out condensation, neutralizes fingerprints, and is...

Read More »
Rustlick Startup Kit
Centrifugal Pumps

Rustlick Startup Kit

Help Extend Coolant Sump Life at Each Change-Over Glenview, IL - September 11, 2009 - Rustlick Startup Kit includes all the products needed for a successful coolant change-over: 1 gallon Kleenzol DY industrial sump cleaner, 16 oz. bottle of Triadine 20 microbiostat, and 12 oz. aerosol of Rustlick 606 moisture-absorbing rust preventative. Each time old coolant is taken out of a sump and new...

Read More »
Inhibitors

Corrosion Inhibitor protects parts for more than 6 months.

Providing thin-film indoor corrosion inhibitor or rust preventive for variety of metals, solvent-based TRIM RPO 6BF is suitable for protecting bearings, gears, and other parts during storage and transit. Non-staining, barium-free, low-odor formula is also water displacing to help prevent rust due to water trapped under protective film and will provide some cleaning action as well. Featuring low...

Read More »
Metalworking Fluids

Rustlick Long-Term Rust Preventative

Save Money by Fortifying Coolant with Long-Term Rust Protection Glenview, IL - December 1, 2008 - Rustlick's Long-Term Rust Preventative extends the life of water-based metalworking fluids by reinforcing their original rust preventatives. Over time cutting fluids lose their ability to protect machines and parts against corrosion which causes the coolant to be changed prematurely or leads to...

Read More »
Epoxy Primer is designed for wet-on-wet spray application.
Chemical Primers

Epoxy Primer is designed for wet-on-wet spray application.

Promoting corrosion resistance over cleaned and treated steel, Spectracron 560 suits short wet-on-wet application windows when topcoated with Spectracron 2K polyurethane enamels; polyurethane topcoat can be applied directly over this primer 10-15 minutes after application. Formulated with VOC less than or equal to 3.5 lb/gal and less than 0.17 lb HAPS/gal, this 2-component, chrome-free primer...

Read More »
Coatings

Unified Coating suits surface preparation applications.

Designed to replace phosphatizing and chromating systems, VpCI(TM)-440 protects multi-metal substrates from corrosion while preparing metals for surface bonding and coating. Non-toxic, non-hazardous, water-based coating can be applied with conventional equipment such as sprayers, dipping tanks, steam cleaners, and power washers. Self-preserving product is environmentally safe and does not require...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers