Inhibitors

Penetrant frees rusted components.

Penetrant frees rusted components.

VpCI(TM) Super Penetrant breaks through Â-½ in. rust in 30 min, displacing moisture and water, and lubricating metal so frozen parts can move freely. Product forms ultra thin film on metal that offers up to 3 months of protection against re-rusting and further corrosive attack. Suited for indoor and outdoor uses, penetrant can be applied by brush, squirt, hand pump spray, aerosol, and spray...

Read More »
Corrosion Inhibitors prevents rust in wire EDM machines.

Corrosion Inhibitors prevents rust in wire EDM machines.

Added to de-ionized water between dirty water tank and clean water tank, H2O Plus prevents build-up of rust on workpieces and non-stainless work holders. Non-ionic product is efficient when used at concentration ratio of 1:100. Used at concentration ratio of 0.5:100, H2O Plus Blue prevents rust build-up and keeps machinery clean by loosening dirt and waste products from tank walls and hoses. Both...

Read More »

Blue Passivate provides corrosion protection.

Hex chrome-free Triumph 3000, suited for zinc, zinc alloy plating, zinc-based die castings, and cad plate, is fluoride-free and exhibits tolerance to metallic impurities. Providing base for broad range of paint, product offers salt spray performance of 96 hr, 120 hr to first white rust. Bath additive boosts salt spray additional 24 hr, and, with topcoat, salt spray performance exceeds 360 hr red...

Read More »
Rust Blocker forms colorless, odorless barrier film.

Rust Blocker forms colorless, odorless barrier film.

DRI TOUCHÂ-® AMBER forms dry-to-touch, humidity- and corrosion-resistant barrier film on cast iron, steel, and MIM components that are machined or have characteristics such as blind holes, recesses, and uneven surfaces. Applied to wet or dry surfaces, product will not drain off parts or wick off into packaging materials. It penetrates and de-waters recessed areas without damaging non-metallic...

Read More »
CMAA Crane Buyer's Guide
Sponsored

CMAA Crane Buyer's Guide

CMAA has organized this Buyer's Guide to promote standardization and to assist prospective buyer's of electric overhead traveling cranes in selection of equipment most suitable for their applications.

Read More »

Fluid prevents rust and corrosion in wire EDM machines.

With concentration of 1:100, Benchmark EDM-RP consists of rust preventative EDM fluid designed for use in wire EDM machines. It prevents build-up of rust and corrosion on work pieces and non-stainless work holders. Non-toxic and safe to use, product will not leave undesirable residue or have any negative effects on cutting efficiency, de-ionizing resin, or conductivity.

Read More »
Metal Coating uses no EPA regulated chemicals.

Metal Coating uses no EPA regulated chemicals.

MicrolokÂ-® AO metal coating provides corrosion resistance using non-corrosive bath. Immersion tank process works on iron and non-stainless steel surfaces to form 0.000040 in. thick aluminum oxide conversion coating. When sealed with rust preventive topcoat, Microlok AO protects parts during storage and shipping and provides break-in lubricity and anti-galling protection. Finish is suited for...

Read More »
Electronic Scale Inhibitor suits commercial/domestic use.

Electronic Scale Inhibitor suits commercial/domestic use.

Unit removes existing limescale from equipment and appliances and prevents formation of new limescale, which results in longer life and energy savings for commercial and domestic appliances such as boilers, hot water heaters, vending machines, and coffee makers. Unit works most effectively on cold water pipe closest to place where scale forms.

Read More »

Vapor Corrosion Inhibitor suits packaging of ferrous parts.

RustBan(TM) 105 is applied directly to corrugated, solid fiber, and other forms of paperboard packaging, allowing metal products to be placed into primary package for storage and shipment. Nitrite-free, repulpable/recyclable treatment offers service life up to 2 years. Partitions, slip sheets, and specialty paperboard products can be produced with RustBan applied to both sides. Treated materials...

Read More »
Corrosion Inhibitor protects ferrous/non-ferrous materials.

Corrosion Inhibitor protects ferrous/non-ferrous materials.

With anticorrosion chemicals, Ferro-PakÂ-® 40MPI (Multi-Purpose Inhibitor) inhibits corrosion in copper, brass, copper alloys, bronze, and aluminum as well as some ferrous metals. Able to protect metals from vapor and contact corrosive influences, it is available in rolls or sheets and is typically used as protective wrap. At 40 lb, product provides improved packaging strength for standard...

Read More »
Disposable Wipes are saturated with rust remover/inhibitor.

Disposable Wipes are saturated with rust remover/inhibitor.

SuperSaturated SmartWipes-® are available saturated with EVAPO-RUST(TM), which removes and inhibits rust on all types of mild steel and iron. Products are safe on all surfaces and will not harm copper, brass, aluminum, plastic, rubber, or vinyl. Non-toxic, non-corrosive EVAPO-RUST contains no acids or alkalis. Water-based solution is non-flammable and contains no petroleum solvents. Free of VOCs...

Read More »

All Topics