Inhibitors

Concentrate Rust Remover features non-toxic formula.

Concentrate Rust Remover features non-toxic formula.

Non-hazardous and safe to use, water-based Rust911 removes rust and oxidation from steel, iron, and copper. Technology uses specifically designed molecule that grabs hold of rust, pulls it off metal, and keeps it from re-depositing.Â- Typically, rust is removed in 10 min to 8 hr at room temperature and same rust can be removed in 5-30 min at elevated temperatures, depending on degree of...

Read More »

Corrosion Inhibitor protects parts for more than 6 months.

Providing thin-film indoor corrosion inhibitor or rust preventive for variety of metals, solvent-based TRIM RPO 6BF is suitable for protecting bearings, gears, and other parts during storage and transit. Non-staining, barium-free, low-odor formula is also water displacing to help prevent rust due to water trapped under protective film and will provide some cleaning action as well. Featuring low...

Read More »

Corrosion Inhibiting Powder protects ferrous metals.

Designed for wet or dry corrosion protection of ferrous metals and aluminum, VpCI 609Â-® Biodegradable Powder creates monomolecular inhibiting layer on metal surface that lasts for up to 24 continuous months. Water-soluble Vapor phase Corrosion Inhibitor (VpCI(TM)) powder does not contain nitrites or phosphates and can be applied in dry form by dusting, fogging, or sprinkling or in aqueous...

Read More »

Additive fights scale deposits, sludge, and corrosion.

Combining organic phosphorous compounds, polymers, and aromatic azoles, VpCI(TM)-647 protects ferrous and non-ferrous metals. Designed for open-loop cooling water systems, product forms thin inhibiting film on metal to prevent corrosion and pitting to parts in direct contact with solution. Then, vapor phase action protects parts that are not in direct contact with solution. Non-toxic,...

Read More »
Packaging Film protects ultra-sensitive electronics.

Packaging Film protects ultra-sensitive electronics.

Polyester-based Eco-CorrÂ-® ESD is suitable for shrouds, sheeting, and bags used for storage or transit protection of electronics. While in use, film continuously emits protective vapor of VpCI corrosion inhibitors that actively saturate air, providing clean, multi-metal corrosion protection. In less than 0.2 sec, product dissipates static, preventing damage to electronics. Film biodegrades...

Read More »
Powder offers treatment for cooling systems lay-up.

Powder offers treatment for cooling systems lay-up.

Based on Vapor Phase Corrosion Inhibitors, Cooling Loop GatorÂ-® diffuses through air or water towards metal surfaces, reaching inaccessible/recessed areas, and forming strong molecular layer. Biodegradable, non-toxic product is designed for seasonal, wet or dry, short- or long-term lay-up, providing corrosion protection for up to 12 months. Packaged in water-soluble PVA bag, Cooling Loop...

Read More »

Treatment System eliminates rust from metal parts.

Clean, Preserve and Protect (CPP) Program restores metal parts and equipment to operational specification, preventing disposal and subsequent replacement costs. Designed for use where sandblasting is not applicable, 3-step treatment system utilizes chemistries to remove corrosion from metal parts, clean parts, and preserve restored parts. Program is available in various systems, including...

Read More »

Coating inhibits oxidation of graphite to 2,000-

Graphi-Coat(TM) 623 titanium diboride-based coating is 2-part, water-based, non-volatile material applied by brush, roller, or dip- or spray-processing. Formulated with respective weight and volume solids content of 78% and 58%, product offers coverage rate at 1 mil dry film thickness of 890 ftÂ-²/gal. Minimum dry film thickness of 2.5 mil is recommended. Once applied, coating is typically...

Read More »

Emitter Packets prevent corrosion.

Measuring 1Â-½ x 3 in., DaubriteÂ-® 1 packets contain volatile corrosion inhibitor that protects exposed metals inside enclosed spaces such as boxes, crates, and containers. Protective vapors form invisible layer on surface of metal, preventing moisture, dirt, oxygen, and other contaminants from depositing on metal and causing corrosion. Product is safe, clean, non-discernible, and has no...

Read More »

Rust Preventive stops steel coil corrosion.

Applied by spray during in-line coil processing, VpCI(TM)-329D provides water displacing protective film that eliminates corrosion from internal and external coil layers. Product combines Vapor Phase Corrosion Inhibition with anti-corrosion agents, enabling formulation of clean film with lubrication characteristics. For coils exposed to industrial atmospheres with pickling, anodizing, and...

Read More »
Sponsored

Simple Connection MGB with EtherNet/IP

The new MGB with EtherNet/IP is a leap forward in access door safety. Designed for easy installation, flawless performance, and long service life, it is engineered with robust features and cutting-edge technology that places it firmly at the leading edge of the door safety device industry. To learn all about the benefits of the Euchner MGB, see our video.

Read More »

All Topics