Industrial / Specific Purpose Computers

Digital Bit Stream PXI Card offers 1-16 channels.
Industrial / Specific Purpose Computers

Digital Bit Stream PXI Card offers 1-16 channels.

Ultrafast UX7005 3U format PXI Card features 16 TTL channels that can be programmed for recording or signal generation. Clock rate is adjustable from 1 kHz to 125 MHz. Card is supplied with 128 Mbit on-board memory as standard, but can be increased in increments of 256 Mbit and 512 Mbit up to 1,024 Mbit when long signals need to be recorded or generated at max clock rates. Software drivers for...

Read More »
Industrial / Specific Purpose Computers

Mezzanine Card targets telecom infrastructure applications.

ProcessorPMC Card, Model PmPPC7447 combines 1 GHz Motorola PowerPC MPC7447A processor with Marvell Discovery III system controller. Processor features 32 KB on-die L1 instruction/data cache and 512 KB on-die L2 cache. Discovery controller gives processor high-speed accesses to up to 2 GB of external memory via 133 MHz Processor Bus. Consuming 18 W of power, Model PmPPC7447 includes 2 Gigabit...

Read More »
PCI Card suits development and simulation applications.
Industrial / Specific Purpose Computers

PCI Card suits development and simulation applications.

PCI-compatible PCI-Altera-485 includes PLX9054 and Xilinx for initial loading of Altera, and DMA transfer of data into and out of FIFOs. Altera controls 40 programmable RS-485/LVDS transceivers and 12 TTL IO. Each RS-485 channel is programmable for direction, termination, and function. Eight Cypress 22393 PLLs support Altera providing ability to synthesize multiple reference rates. PLX 9054...

Read More »
Industrial PCs suit factory automation applications.
Industrial / Specific Purpose Computers

Industrial PCs suit factory automation applications.

Models 3615 and 3715 are all-in-one computers with 15.0 in. XGA flat panel LCD. Powered by CeleronÂ-® 850 MHz CPU, products come with 256 MB RAM, 20 GB hard drive, and CD-ROM and floppy drives. They are also available with IntelÂ-® PentiumÂ-® III 1.0 and 1.26 GHz processors, and DRAM options up to 512 MB. Operator input options include touchscreen and/or keypad with integrated...

Read More »
Industrial / Specific Purpose Computers

Analog Output Board suits PCI-based computers.

Model OMB-DAQBOARD-2004 offers four 16-bit 100 kHz analog outputs ranging from -10 to +10 V. Through use of Bus Mastering DMA, each D/A output can continuously output waveform, which can be read from PC RAM or file on hard disk. Program can asynchronously output value to either D/A for nonwaveform applications if D/A is not already being used in waveform output mode. Additional D/A channels can...

Read More »
Rugged Computer features compact dimensions.
Industrial / Specific Purpose Computers

Rugged Computer features compact dimensions.

Model GX-1000 measures 10.1 x 8 x 2.9 in. and is equipped with low-heat 800 MHz Via processor, 10 LCD, 256 Mb DRAM upgradeable to 512 Mb, 20 Gb hard drive, and 10/100 Ethernet. Options include 2.4 GHz wireless radio, 802.11 b or g, resistive touchscreen, and multiple industry standard I/O. Typical applications include forklift-mount operation requiring PC-compatible computing ability.

Read More »
Daughtercards run at 800 MHz.
Industrial / Specific Purpose Computers

Daughtercards run at 800 MHz.

PowerPCÂ-® 7447 computer node daughtercards are compatible with company's RACEÂ-®++ motherboards for VME, cPCI, and PowerStream systems. They use Motorola's PowerPC G4+ processors with AltiVec(TM) technology. FFT algorithm in Scientific Algorithm Library takes advantage of architectural improvements in G4+ processors that raise sustained instruction rate per cycle. Cards are suited for...

Read More »
Disk Module provides multiple mass storage solutions.
Industrial / Specific Purpose Computers

Disk Module provides multiple mass storage solutions.

Field-replaceable, 6U CPCIStor supports boot strap, application load, and data storage in single slot. Unit provides 32-bit, 33 MHz CompactPCI interface, has on-board ATA controller, and supports hot-swap removal. It is available with 2.5 in. ATA hard drives up to 80 GB, or CF-II drives up to 4 GB each. Front panel provides activity LEDs and ejector handles for removal. CPCIStor is supported...

Read More »
Industrial / Specific Purpose Computers

Workstation supports advanced 3D graphics.

Powered by SMP-capable, 3.2 GHz Intel(TM) Xeon single/dual processors, IntelliStationÂ-® Z Pro models deliver scalable multiprocessor performance in rack-mountable towers with 6 slots, 6 bays, 3 fans, and 425 W power supply with PFC. Units support NVIDIA Quadro FX 1100 3D graphics and up to 8 GB of PC2100 CL2.5 ECC DDR SDRAM DIMM memory. They also include integrated Gigabit Ethernet,...

Read More »
Industrial / Specific Purpose Computers

Workstation delivers 64-bit processing power.

IntelliStationÂ-® A Pro is designed with AMD Opteron, SMP-capable processors that enable simultaneous 32- and 64-bit computing. Scalable unit enables creation of digital content with realism through detail, textures, lighting, and smooth movement. Features include up to 16 GB of PC3200 CL3 DDR ECC SDRAM RDIMM, Dual Ultra320 SCSI and SATA HDD subsystems, and choice of S.M.A.R.T. HDDs. Unit...

Read More »
Solder Redefined
Sponsored

Solder Redefined

Indium Corporation has developed a new twist on traditional solder by developing a composite with a reinforced matrix internal structure. The result is a solder with increased strength and reliability. Check out this video to learn more about the mechanics behind the groundbreaking technology.

Read More »

All Topics