Industrial / Specific Purpose Computers

Industrial / Specific Purpose Computers

Computer suits communications/control applications.

Enduro Outdoor can be used as control computer with SoftPLC CoDeSys and WINtrak fieldbus terminals or as communication computer installed in vehicles for remote diagnosis via GPRS or WLAN as well as wireless transfer of commands and data. Its 1 GHz AMD Geode NX 1500@6W processor draws 9 W of power and makes computer suited for fanless operation. Equipped with PLC, shock-resistant, IP67 waterproof...

Read More »
Industrial / Specific Purpose Computers

Panel PC targets semi-industrial computing markets.

Based on 2.1 GHz Intel Pentium M processor, industrial-grade Model AFL17M-B is equipped with Intel 855GME+ ICH4 chipset, 2 DDR333 DIMM memory slots, Type II Compact Flash up to 1 GB, and room for one 2.5 in. SATA hard disk drive. Plastic front panel is IP64/NEMA-rated, and 17 in. TFT LCD display provides 1,280 x 1,024 resolution. PC includes 2 Ethernet 10/100/1000 ports, 2 USB 2.0 ports, and 1...

Read More »
Industrial / Specific Purpose Computers

Single Board Computer withstands severe environments.

Designed around Freescale's PowerPCÂ-® e600 processors, 3U CompactPCI Model IC-e6-cPCIa integrates 2 Gigabit Ethernet channels, 2 high/full speed USB2 ports, 2 multi-purpose serial controllers, and 2 high/full speed ports. Memory includes 256/512 MB DDR-ECC SDRAM, 128 KB ultra-fast SRAM, 32 KB FRAM, 64 MB Flash EPROM, and up to 1 GB Nand Mass Flash. PMC expansion slot permits addition of...

Read More »
Industrial / Specific Purpose Computers

Computer offers 32- and 64-bit computing simultaneously.

With integrated 15 or 17 in. TFT screen, and measuring 17 x 12 x 4.25 in., FleXtreme NextDimension can accommodate Microsoft Windows, Linux, and Solaris. Driven by Opteron processor and with up to 2 dual-core (quad) processors, it allows additional I/O through 64-bit PCI-X slot that runs at 133 MHz. Increased graphics capability is provided through PCI Express x16 slot that accommodates any COTS...

Read More »
Chassis suits industrial automation platforms.
Industrial / Specific Purpose Computers

Chassis suits industrial automation platforms.

Combining LCD display, keyboard, touchpad, OSD control, function and cursor keys in single chassis, ATM-4233 is suitable for environment/facility monitoring and test and measurement applications. Computing platform with expansion capacity offers compatibility with Pentium 4, Pentium M, and Celeron CPU cards. Fourteen expansion slots enable use of any combination of ISA/PCI/CPU cards. Powered by...

Read More »
Industrial / Specific Purpose Computers

Industrial Panel PCs are scalable to fit different size LCDs.

Equipped with Intel Pentium 4 CPU, Industrial Panel PCs include 2 standard modules, one with 12.1 in. SVGA or XGA LCD and one with 17.0 in. SXGA LCD. Fully scalable by removing U-bracket on cradle of enclosure, units accommodate LCDs from 12.1-19 in. diagonal. Panel PCs include 1 LAN port, 4 serial I/O ports, 3 USB 2.0 ports and 1 LPT port on rear panel. They are suited for machine automation,...

Read More »
Industrial / Specific Purpose Computers

Fanless Computer provides silent operation.

Based on IntelÂ-® ULV Celeron processor, Model PL-06058 is housed in 12.3 x 5.5 x 2.6 in. industrial-grade enclosure and uses internal heat pipes to conduct heat to heat-sink. Unit supports CompactFlash socket, Mini-PCI slot, and up to 1 GB DDR RAM. Available as COTS controller or as basis for OEM designs, computer also includes one 10/100 Ethernet port, 4 serial ports, 1 parallel port, IDE...

Read More »
Industrial-Grade Panel PC has Intel Pentium 4 processor.
Industrial / Specific Purpose Computers

Industrial-Grade Panel PC has Intel Pentium 4 processor.

Designed for industrial environments, IPPC-9151 provides 2 half-size PCI expansion slots as well as front USB and OSD access in stainless steel chassis with hard anodic coating, tempered glass, and 15 in. TFT LCD screen. Socket 478 CPU structure supports Pentium 4 processors to 2.8 GHz with hyper-threading technology, and dust filter protects against ingress of dust and dirt. Offered with panel...

Read More »
Industrial / Specific Purpose Computers

Ruggedized Computer is suited for steel and metal industry.

Powered by 1.1 GHz Pentium III processor, GX-1200(TM) collects data for applications using forklifts, fixed-mount warehousing, and distribution and factory floor settings. It incorporates touchscreen, 802.11 B/G wireless, 256 or 512 MB RAM, and optional Bluetooth. Computer accommodates variety of operating systems, including DOS, Windows NT/2000/XP, XP Embedded, and Linux. Several mounting...

Read More »
Neagle Choice, LLC Announces New Available Services
Sponsored

Neagle Choice, LLC Announces New Available Services

Neagle Choice has long been known as a quality source for commercial sewing, printing, die cutting, and the manufacturing of a wide range of custom products. Enhancing our service capabilities has been the key to our success, and has driven our growth into many new and exciting markets. Continuing on this trajectory, we now offer precision laser cutting and etching, adding to our long line of manufacturing services. See our video to learn all about it.

Read More »

All Topics