Industrial Computer features fanless design.
Equipped with VIA Eden 600 MHz CPU, Model AR-B1673 features battery backup SRAM to prevent data and settings from being lost under unexpected power loss. Graphics are provided by AGP 4X and support for 18-bit TTL/LVDS LCD. To prevent potential problems caused by vibration, unit includes onboard SDRAM. Optional Protect U prevents software from being illegally copied and implemented on other...
Read More »
Single Board Computer suits most Internet applications.
Utilizing 800 MHz or 1.0 GHz IBM 750GX PowerPC microprocessor, CompactPCI-® CPCI-7055 SBC includes Marvell-® Discovery(TM) III MV64460 PowerPC chipset, which provides integrated system controller for embedded control applications. Board is equipped with 64 Mbytes Flash, 2 Gbytes DDR 400 SODIMM memory, support for three 10/100/1000 Ethernet LANs, IDE interface for hard disk drive support, and...
Read More »
Full-Featured PCI Boards feature compact footprint.
Based on PICMG COM Express standard, Compact COM Express features 95 x 95 cm form factor in microETXexpress (for PCI-Express) and microETX (for PCI only) versions. All models retain position of X1 and X3 ETX connectors in relation to baseboard. Concerning interface layout, pinout for PCI and PCI Express will be on different interfaces. However, other interfaces for peripherals, network, and...
Read More »
Single Board Computer suits embedded communications.
Configured with either of two 833 MHz PowerQUICC III processors from Freescale Semiconductor, CompactPCI PowerPC Model F13 is equipped with Altera Cyclone FPGA, which can be used to implement multiple parameterized blocks of intellectual property. Communications-oriented interfaces on front panel include 2 Gigabit Ethernet ports, 1 Fast Ethernet interface, and serial UART. SBC supports up to 2 GB...
Read More »
A Comprehensive Guide to E-Mobility and E-Aviation
This white paper provides a comprehensive guide to E-Mobility and E-Aviation.
Read More »Single Board Computer suits harsh environment applications.
With 3U form factor, single-slot C900 operates at 1.167 GHz and incorporates low-power version of G4+ MPC7447A/7448 PowerPC-® microprocessor. Unit self-monitors temperature, controls power dissipation, and provides AltiVec support for real-time vector processing. Featuring multiple on-board I/O and memory features, SBC provides up to 1 GB fast DDR SDRAM with ECC protection, 64 MB user Flash, 32...
Read More »Interface Board provides distributed synchronization.
Engineers can use NI PCI-1588 Interface to synchronize clocks and events on multiple distributed devices with submicrosecond precision using IEEE 1588 precision time protocol. It uses RJ-45 Ethernet cabling and can operate as either master or slave clock module. Future time events and time stamping capabilities can be used to correlate events distributed across Ethernet network. Onboard FPGA let...
Read More »Single Board Computer features industrial compact enclosure.
Housed in 1U 19 in. enclosure less than 14 in. deep, APOLLO ICE is fitted with 1.6 GHz Pentium M CPU, 512 Mbytes of DDR memory, and 180 W ac power supply. It offers dual independent display capability, dual Ethernet with Gigabit Ethernet port, dual FireWire ports, 4 USB 2.0 channels, and 2 serial ports. Able to accommodate 2 PCI add-on cards, system supports DVD/CDRW drive, slip floppy disk...
Read More »Self-Contained PC features 3 PC/104-Plus expansion sites.
Utilizing Intel Celeron M processor, Talon 8400 features 256 MB PC100/PC133 SDRAM and 20 GB hard drive. It includes 2 fast Ethernet ports, 4 USB 2.0 ports, SVGA connector, 1 IEEE 1284 port, and 4 RS232/485 serial ports. Talon supports wireless connectivity by way of 2 open PCMCIA slots. Featuring aluminum housing, PC performs in harsh conditions with operating temperature of 5-40-
Read More »CompactPCI Subsystem includes redundant power supplies.
Featuring 64-bit, 8-slot 6U backplane in 4U enclosure, Model cPCIS-6418U is compliant with PICMG 2.5 computer telephony integration standards and is suited for telecommunications, CTI, VoIP, and network equipment applications. Backplane dedicates 1 slot to system CPU board and 7 slots to peripheral boards. System uses 500 W and 200 W redundant power supplies with universal ac input, and front...
Read More »PMC Card suits new or upgraded embedded applications.
Powered by 1.4 GHz Intel-® Pentium-® M Low Voltage processor or Intel-® Celeron-® M Ultra Low Voltage processor, Model PSL09 supports 33/66 MHz PCI bus, and incorporates power management technology, VGA interface, and 256 Mbytes of 333 MHz DDR SDRAM with optional ECC. It provides embedded designers with 4 USB 2.0 ports, 2 serial ATA channels, and 2 Fast Ethernet ports. Card supports monarch...
Read More »
Custom Fabrication & Machining Services with Over 30 Years of Experience
As a trusted manufacturer to customers across a broad range of industries, Key Gas Components is a premier provider of CNC machining and tube fabrication. Our entire organization is quality driven and customer-centric, with broad-based manufacturing capabilities that can accommodate the most challenging requirements. See our video to learn more.
Read More »
