Industrial / Specific Purpose Computers

Carrier Card supports 32-bit, 66 MHz PCI interface.
Industrial / Specific Purpose Computers

Carrier Card supports 32-bit, 66 MHz PCI interface.

Model APC-PMC enables use of PMC mezzanine I/O modules in standard PCI computer system. It acts as adapter to route PCI bus signals to and from PMC module through PCI card slot edge connector. Modules with front or rear connections for I/O cable access may be used. Both 5 and 3.3 V signaling are accommodated. Typical uses include data acquisition, process control, test and measurement, motion...

Read More »
Single Board Computer is radiation-tolerant.
Industrial / Specific Purpose Computers

Single Board Computer is radiation-tolerant.

Space-qualified, single-slot, 3U CompactPCI Model S950 combines PowerPC 750FX processor with silicon on insulator processor for less than 12 W power consumption. It features 33 MHz 32-bit internal PCI bus, 1 Mb dual redundant boot Flash memory, and triple redundant 128 Mb SDRAM. Board is designed for both manned and robotic space vehicles in harsh space radiation environments found in low earth...

Read More »
Industrial / Specific Purpose Computers

Embedded Box Computers use Pentium® M processors.

Manufactured in 10.41 x 2.72 x 5.4 in., cast aluminum chassis, ARK-3380 Series offers fanless operation, scalable processing, and customizable I/O. It accepts low-voltage Intel-® Celeron/Pentium-® M processors to 1.4 GHz and choice of CFC SSD drive or 2.5 in. HDD. Mounted inside machinery or used as standalone product, series includes models with multimedia I/O support (ARK-3380), multiple I/O...

Read More »
CompactPCI Module allows data rates up to 100 Mbit/s.
Industrial / Specific Purpose Computers

CompactPCI Module allows data rates up to 100 Mbit/s.

Based on LAN Controller 82551ER, CLAN7 3U CompactPCI Module provides Ethernet/Fast Ethernet interface according to IEEE 802.3. In addition to 8-pin RJ45 socket, front panel features 4-pin M12 socket according to Industrial Ethernet Standard of IAONA organization. Four LEDs provide information about operating state of 4 HP module as well as quality of LAN connection. Network is electrically...

Read More »
Panel Computer suits supervisory control applications.
Industrial / Specific Purpose Computers

Panel Computer suits supervisory control applications.

Ruggedized ARP-2019 is 3.75 in. deep and features 19.0 in. LCD screen supplied with strengthened glass or resistive touchscreen and NEMA 4/IP65 compliant front bezel. Computer is powered by Intel P4 or Pentium-M CPU, supports up to 1 Gb SDRAM, has one PCI expansion slot, and is equipped with a CD-ROM or DVD-CDRW combo drive. Unit also incorporates 2.5 in. IDE HDD, 4 USB 2.0 ports, up to 4 RS-232...

Read More »
Modular Panel PC is offered with 19 in. TFT display.
Industrial / Specific Purpose Computers

Modular Panel PC is offered with 19 in. TFT display.

Business Panel has half-size slot-CPU design, front-side IP 65 protection, and comes with choice of processors from 850 MHz to 1.4 GHz Pentium III or 1,200 MHz Celeron. Up to 112 programmable function keys and 16 special keys can be integrated in display frame, and display can be separated from computer. CANopen, DeviceNet, or Profibus field buses can be integrated directly on board. Features...

Read More »
Mini Industrial Computer withstands factory floor conditions.
Industrial / Specific Purpose Computers

Mini Industrial Computer withstands factory floor conditions.

Suited for automation and control, JRex IBOX supports processors from 600 MHz VIA Eden to 1.6 GHz Intel Pentium M. All CPU assemblies are fanless and passively cooled. Measuring 226 x 59 x 122 mm, modular product incorporates PCI slot and between 256 Mb and 1 Gb of RAM. Compact Flash, between 128 Mb and 1 Gb, or internal, shock-resistant 20-60 Gb HDD can be implemented as storage device....

Read More »
Panel PC connects to CANopen, CAN, DeviceNet, or Profibus.
Industrial / Specific Purpose Computers

Panel PC connects to CANopen, CAN, DeviceNet, or Profibus.

Featuring on-board field bus connections, V Panel modular HMI computer is based on ETX technology, supports Pentium-® M processors up to 1.1 GHz, employs passive, fanless cooling. Display dimensions are scalable from 10.4-19 in., and up to 112 programmable function buttons and 16 special buttons can be integrated into display frame. Connectivity is provided via 4 serial ports, 3 USB ports, 2 x...

Read More »
SBCs offer color touch screen LCD and Java(TM) support.
Industrial / Specific Purpose Computers

SBCs offer color touch screen LCD and Java(TM) support.

SmartControl-® SC-210/211 network-enabled HMI computers are based on 32-bit ARM processor with 64 Mb of SDRAM max and 256 Mb Flash max for solid state storage of application code and data. Along with 5.7 in. QVGA display, they integrate Ethernet controller, up to 6 RS232/RS485 serial ports, and analog and digital I/O. Firmware integrates real-time kernel and Sun-certified Java Virtual Machine,...

Read More »
Integrated Workstation has modular, customizable design.
Industrial / Specific Purpose Computers

Integrated Workstation has modular, customizable design.

Based on Mini-ITX style motherboard that supports Pentium 4 or embedded CPU architecture, ITX2 is available with 15 and 17 in. flat panel displays and touchscreen support. System, fully compatible with Microsoft and Linux OS, has 4.5 in. mounting depth and is built to NEMA 4 specifications. Industrial computer incorporates 4 serial ports, 4 USB 2.0 ports, 2 PCI slots, onboard 10/100 Ethernet...

Read More »

All Topics