Common Mode Filters are suitable for power applications.
Fixed Inductors

Common Mode Filters are suitable for power applications.

CSF Series have ungapped H ferrite cores with split-section bobbins that have been tightly wound to ensure constant leakage inductance. Dielectric withstanding voltage is 1.5 kV and temperature rise at maximum current is 45 deg C. Filters are available with with vertical or horizontal core mounting, inductance values of 1 to 120 mH, and in industry standard footprints.

Read More »
RF Inductors withstand shear test to 4.4 lbs.
Inductors

RF Inductors withstand shear test to 4.4 lbs.

SMRF 1812 surface mount inductors provide inductance values from 1.0 to 1000 microHenries and current ratings from 450 to 30 mA. They exhibit resistance to thermal shock, and resist soldering temperatures up to 250 deg C for 30 seconds. Applications for SMRF 1812 inductors include RF signal circuitry in communications, test & measurement, medical diagnostic, and industrial process control...

Read More »
Noise Filters suit clock output signal line applications.
Filters

Noise Filters suit clock output signal line applications.

KC series distributed constant circuit type noise filters offer capacitance tolerance of ±30%, inductance tolerance of ±15%, and inductance value of 10nH. Rated voltage is 25V with operating temperature range of -40 to 85° C. Filters are available in case size 1206, and are suitable for flow, reflow or iron soldering. KC series 3-terminal capacitor/inductors are designed for use...

Read More »
Trimmer Capacitors suit RF circuitry applications.
Variable Capacitors

Trimmer Capacitors suit RF circuitry applications.

FILMTRIM(R) plastic dielectric trimmer capacitors offer 4 capacitance ranges from 0.5 to 4.5 pF through 1 to 20 pF. Devices measure 6.8 x 5.4 x 2.6 mm, and use PTFE film. Quality factor (Q) is greater than 1000 when measured at 10 MHz, and operating temperature is -25 degrees to 85 degrees C. Offering moisture resistance, plastic film trimmers are suitable for flow and reflow soldering....

Read More »
Wire Wound Chip Inductors have dim. tolerance of ±0.004 in.
Fixed Inductors

Wire Wound Chip Inductors have dim. tolerance of ±0.004 in.

LQ-LBH Series chip inductors reduce EMI, and enable mounting density with pitch of 0.3mm, Q-Values of 12-46, and non-directional surface-mountability. LQ-LBH devices provide 100% silver wire wound (Ag) internal conductors and advanced ceramics. Inductance range is from 2.7 to 100 nH, maximum current is rated from 200mA to 1A, and DC resistance values range from 0.03 to 1.0 Ohms.

Read More »
Miniature Inductors are designed for surface mount uses.
Inductors

Miniature Inductors are designed for surface mount uses.

SMI-1 Series consists of 13 parts having inductance values ranging from 10.0 Â-µHy @ 1.00 amp to 220.0 µHy @ .42 amp. Tolerances for inductance values are 20% for 10.0 µHy to 47.0 µHy values and 10% for 56.0 µHy to 220.0 µHy values. With pads solder-masked to core, inductors can be IR or vapor phase soldered directly to printed circuit board. Inductors...

Read More »
Inductors feature lead-free terminations.
Inductors

Inductors feature lead-free terminations.

Surface mount, wire-wound CC Series Inductors are used for RF applications in electronics industry, especially for wireless and test and measurement equipment where solderability is concerned. Models CC0603, CC0805 and CC1008 have inductance ranges of 1.6 to 270 nH, 3.3 to 820 nH, and 10 to 4700 nH, respectively. Model CF1008 is available for applications requiring inductance from 1.2 to 10 mH.

Read More »
Ferrite Chip Inductors replace axial leaded inductors.
Inductors

Ferrite Chip Inductors replace axial leaded inductors.

SMD Molded Wire Wound Ferrite Chip Inductors consisting of Model CF453232 (1812-dimensions are 4.5 x 3.2 x 3.2 mm) and Model CF322522 (1210-dimensions are 3.2 x 2.5 x 2.2 mm) are suitable for pick and place equipment. 1812 has inductance range of 0.1 Â-µH to 1000 µH, with usable frequency of 2.5 MHz to 300 MHz. 1210 features inductance of 0.12 µH to 220 µH, with...

Read More »
Toriod Inductors are for surface-mounted power supplies.
Inductors

Toriod Inductors are for surface-mounted power supplies.

SMT35A Series has 2 windings on 1 core, allowing design engineer to use it as single inductor with windings connected in series for higher inductance, or in parallel for higher current, or as 1:1 transformer. Applications include high frequency switch mode power supplies, power regulators and dc/dc converters. Unit is self-shielding, compatible with all reflow assembly processes, UL94 V-O...

Read More »

All Topics