Cost-Effective Protection Without Enclosures: IP 65-66 Rated REO-USA Components at APTA EXPO
Electronic Components & Devices

Cost-Effective Protection Without Enclosures: IP 65-66 Rated REO-USA Components at APTA EXPO

INDIANAPOLIS – The elements can wreak havoc on exposed components, be it dust and debris, rain, saltwater or human-inflicted, hose-jet cleaning solutions. And special enclosures for external components can cost a bundle. Solutions are readily available, however, via fully encapsulated REO-USA sinusoidal filters, line reactors, load reactors and other components with ingress protection ratings...

Read More »
DC Input EMC Filter features 50 A rating.
Electronic Components & Devices

DC Input EMC Filter features 50 A rating.

Enclosed in metal case, Model RDEN-048050 accepts input voltage up to 76 Vdc and will operate at 50 A in ambient temperature of -30 to 55°C, derating to 20 A at 85°C. With frequencies from 0.2–10 MHz, common mode attenuation is 30 dB and with frequencies from 0.7–30 MHz differential mode attenuation is 25 dB. Input to case (ground) isolation is 1,500 Vdc and isolation resistance is 500 MΩ...

Read More »
Chip Bead Inductors offer current ratings up to 7.5 A.
Electronic Components & Devices

Chip Bead Inductors offer current ratings up to 7.5 A.

Used for noise reduction in power supply lines of car electronics and industrial DC motors, FB Series M Type Inductors include EIA 0603 size FBMJ1608 measuring 1.6 x 0.8 x 0.8 mm, EIA 0806 size FBMH2016 measuring 2.0 x 1.6 x 1.6 mm, and EIA 1206 size FBMH3216 at 3.2 x 1.6 x 1.6 mm. Models FBMJ1608HS220NTW, FBMJ1608HM180NTW, FBMH2016HM121NTV, and FBMH3216HM221NTV offer impedance values of 22, 18,...

Read More »
Electronic Components & Devices

Vishay Intertechnology to Showcase Efficiency and Reliability With Leading Technologies at Techno-Frontier 2014 in Japan

MALVERN, Pa. — Vishay Intertechnology, Inc. (NYSE: VSH) today announced that it will be exhibiting its latest semiconductors and passive components in booth 1C-205 at Power System Japan, a focused exhibition on power systems at Techno-Frontier 2014, being held at the Tokyo Big Sight from July 23 to 25, 2014. A component solutions provider for connectivity, mobility, and sustainability, Vishay...

Read More »
How to Effectively and Efficiently Clean Heat Exchangers, Part I
Sponsored

How to Effectively and Efficiently Clean Heat Exchangers, Part I

For refineries and petrochemical plants, cleaning heat exchangers is a dirty job but somebody has to do it. While there are many approaches on how to clean shell and tube heat exchangers, it is indisputable that the right method is absolutely critical for ensuring that equipment is fully operational. Otherwise, you could end up with a potential equipment shutdown, which will cost you time and money. In this three-part series, you will learn about the various benefits, methods, and obstacles involved in heat exchanger cleaning. Part one introduces the fundamentals of cleaning, as well as explores the pros and cons of on-site versus off-site services. Download the first of this three series to assist you in finding the best solution for your dirty job here.

Read More »
RF Chip Inductors are available with ceramic or ferrite cores.
Electronic Components & Devices

RF Chip Inductors are available with ceramic or ferrite cores.

Capable of operating from -55 to +125°C, RoHS-approved Series 5406 comprises 0603-size wire-wound chip inductors available with ceramic or ferrite core construction. Inductance values from 1.5–470 nH for ceramic and 470–2,700 nH for ferrite. Q ratings are as high as 80 at 800 MHz with Self Resonant Frequencies as high as 6 GHz for ceramic and 600 MHz for ferrite. Areas of use include...

Read More »
Multilayer Ceramic Chip Inductors feature low DC resistance.
Electronic Components & Devices

Multilayer Ceramic Chip Inductors feature low DC resistance.

Supplied in standard surface mount footprint, RF Ceramic Inductors include Series 0201CC, 0402CC, and 0402CH with inductance ranges of 1.0–100 nH, 1.0–270 nH, and 1.0–15 nH, respectively. Units are made of monolithic non-organic substance that gives them tight tolerance. High Q value provides consistent, stable signal transmission at high frequencies. Applications include wireless...

Read More »

REO-USA CNW 903 and CNW 905 Line Reactors Provide Key Performance and Market Advantages
Electronic Components & Devices

REO-USA CNW 903 and CNW 905 Line Reactors Provide Key Performance and Market Advantages

Patented technology and an inductance edge can deliver documented ROI INDIANAPOLIS – Indianapolis-based REO-USA has a pair of line reactors that other manufacturers can't match. Like many in the marketplace, the CNW 903 and CNW 905 address voltage and current issues and attenuate harmonics in variable frequency drive (VFD) systems, helping to extend VFD and motor service life. But the company...

Read More »
Flat Wire High Current Inductors operate up to 356
Electronic Components & Devices

Flat Wire High Current Inductors operate up to 356

Rated to Insulation Class H, high current inductors and inductor modules range from few microhenries to over 1 mH and from 30 A to >500 A; currents up to 1,000 A are available for custom designs. Compact, flat wire design optimizes thermal management, which promotes performance and reliability. Insulated to minimum of 100 MΩ at 1,500 Vac between coil and core, modules exhibit minimal copper...

Read More »
Common Mode Chokes target automotive networks.
Electronic Components & Devices

Common Mode Chokes target automotive networks.

Providing EMC/EMI protection for automotive electronics, HOT ROD AE20xx I-Bar Chokes meet Broadcom® Corporation's BroadR-Reach® Automotive Ethernet technology for mode conversion up to 400 MHz. Devices are used for noise suppression on Ethernet-based networks transmitting data, video, and voice over single unshielded twisted pair within vehicle. Measuring 4.5 x 3.2 x 2.8 mm, chokes are suited...

Read More »
Electronic Components & Devices

Vishay Intertechnology to Exhibit Leading High-Frequency, Precision, and Wire-Bondable MLCCs, Resistors, and Inductors at IMS2014

MALVERN, Pa. – Vishay Intertechnology, Inc. (NYSE: VSH) today announced its technology lineup for the 2014 IEEE MTT International Microwave Symposium (IMS2014), being held from June 1-6 at the Tampa Convention Center in Tampa Bay, Florida. At the conference and exhibition, the company will be highlighting its latest industry-leading multilayer ceramic chip capacitors (MLCCs) and surface-mount...

Read More »
Precision Machined Parts for High Tech Applications
Sponsored

Precision Machined Parts for High Tech Applications

For precision and value that sets the standard for quality and craftsmanship, EGS Production Machining is the source for precision and value. Our extensive capabilities and dedication to customer service allow us to deliver the optimal manufacturing solution. See our video to learn more.

Read More »

All Topics