Inductors are specified for saturation currents up to 70 A.
Inductors

Inductors are specified for saturation currents up to 70 A.

High-Current Models IHLP-2525EZ-05 and IHLP-2525EZ-01 offer inductance ranges of 0.1-2.2 Â-µH and 3.3-10 µH, respectively. Units measure 0.255 x 0.270 in. with max height profile of 0.197 in. Both occupy standard 2525 footprint while providing typical DCR values from 0.81-53.3 mOhm. Packaged in 100% Pb-free, shielded composite housing, inductors handle high transient current spikes...

Read More »
High Temperature Inductors withstand up to 200°C.
Inductors

High Temperature Inductors withstand up to 200°C.

Series DR360-1-2 Wirewound Coil Inductors provide protection against EMI problems in high current handling applications up to 38 A. Magnetic alloy core offers extended life in extreme temperatures from -55 to 200°C. Depending on model, DR360-1-2 Series features inductance from 0.8-1000 mH. DCR is specified from 0.003-0.43 ohms over max current rating of 1.6-38.7 A. Units come in round...

Read More »
Configurable Dual Winding Inductors provide EMI shielding.
Inductors

Configurable Dual Winding Inductors provide EMI shielding.

SMT inductors in 4700 and 4800 series are bobbin format devices with 1:1 winding ratio that can be connected in series or parallel for range of inductance combinations. With respective heights of 5.0 and 6.2 mm, 4700 and 4800 series incorporate integral EMI shield and offer nominal inductance values from 1.0-400 Â-µH @ 10 kHz and 100 mVac. Devices in 4700 series handle max continuous current...

Read More »
Toroidal Inductors suit power applications.
Inductors

Toroidal Inductors suit power applications.

Thru-hole Series 083AT features inductance from 10-100 Â-µH and current ratings up to 30 Adc. High current/power capacity units are targeted for use in power supply filtering and energy storage applications. Specific applications include medical diagnostic, monitoring and analysis equipment, electrical/electronic test and measurement equipment, and commercial and industrial control systems.

Read More »
Wirewound Chip Inductors protect electronic circuitry.
Fixed Inductors

Wirewound Chip Inductors protect electronic circuitry.

Surface-mount, Series DR354-1-2-3-4 provides protection against EMI problems in high-frequency filtering applications. Depending on model, units feature inductance from 1.6-4,700 nH, with DCR from 0.030-4.3 ohms, over max current rating of 0.700-0.230 A. Available in packages as small as 0.044 x 0.071 in. with 0.040 in. profile above circuit board, miniature inductors are suited for appliances,...

Read More »
Linearity Coils are suited for CRT applications.
Variable Inductors

Linearity Coils are suited for CRT applications.

Printed circuit mount linearity coils SDL-3006 through SDL-3009 are electronically adjustable via control winding that is biased with positive or negative dc current. Measuring 1.8 x 1.0 x 0.8 in., products are designed for applications with yoke current requirements from 14.0 A (SDL-3006 and SDL-3008) to 18.0 A (SDL-3007 and SDL-3009) peak to peak. Products also offer extended operation for...

Read More »
Inductors feature DCR values down to 0.47 mOhm.
Inductors

Inductors feature DCR values down to 0.47 mOhm.

Available with inductance values of 5.6, 6.8, 8.2, and 10 Â-µH, surface-mount Series IHLP features saturation currents up to 120 A and low losses at frequencies up to 5 MHz. Measuring 0.508 x 0.520 x 0.256 in., each inductor is packaged in self-shielded package that meets military specifications for resistance to thermal shock, moisture, mechanical shock, and vibration. Applications include...

Read More »
Power Inductors stay cool in high-frequency applications.
Inductors

Power Inductors stay cool in high-frequency applications.

Low Loss Series 2100LL, 2200LL, and 2300LL High Current Toroid Power Inductors incorporate MAGNETICS Kool MÂ-µÃ‚® or equivalent toroid core. Distributed air gap cores are made from ferrous alloy powder, enabling component to maintain low temperature rise at elevated frequencies. Available in horizontal and vertical mounting configurations, units feature inductance range of 1-1,000...

Read More »
Pot Core Inductors feature high inductance.
Cores

Pot Core Inductors feature high inductance.

POWER POTS(TM) Series RL-7300 has 23 standard values for each of 5 different sizes. Units offer inductances from 10 mH to 1 H and handle currents from 12 mA to 1 A. Pot core design is capable of handling dc currents while maintaining stable inductance due to high saturation currents and self-shielding. Typical applications include dc chokes, differential mode chokes, filters, switching circuits,...

Read More »
Thin Film Chip Inductor suits high-volume applications.
Fixed Inductors

Thin Film Chip Inductor suits high-volume applications.

Surface mount chip inductor KL73 1H(0201) provides narrow inductance deviation for high-frequency circuit matching in high-volume and small-size applications. Compact size allows for high-density mounting. Product is available with tolerance of ±0.1, ±0.2%, ±2%, ±5% nH and inductance from 0.6-27 nH. It is suited for use in computers, digital equipment, industrial...

Read More »
Precision Machining Solutions with Over 25 Years of Experience
Sponsored

Precision Machining Solutions with Over 25 Years of Experience

Quality, customer service, and unbeatable value are the hallmarks of Hogge Precision. Since 1989 we have built a reputation as the go-to precision machining source, servicing many demanding industries. For CNC machining and screw machining, there are few manufacturers that can match our capabilities and expertise. See our video to learn more.

Read More »

All Topics