Chip Inductors suit space-conscious applications.
Fixed Inductors

Chip Inductors suit space-conscious applications.

Micro-miniature Series PM0402T and PM0603T measure 1.0 x 0.5 x 0.35 mm and 1.6 x 0.8 x 0.45 mm, respectively. Photolithographic design enables tolerances of ±2% with inductance ranges from 1.0-68 Â-µH at 100 MHz. With dc current range of 70-800 mA, RoHS-compliant units exhibit Q value up to 17 at 300 MHz, self resonant frequency of 6 GHz, and operating temperature of -55 to...

Read More »
Wirewound Chip Inductor features 1 A current rating.
Fixed Inductors

Wirewound Chip Inductor features 1 A current rating.

With 3.2 x 2.5 mm footprint, Model CBC3225-4R7MR is designed specifically for space-critical dc/dc converter choke coil applications in battery-powered portables. Unit is rated 4.7 Â-µH and housed in EIA standard 1210 case. Non-polarized electrodes allow mounting in any orientation on circuit board. Applications include cellular phones, digital cameras, PDAs, and other ultra-portable...

Read More »
Resonant Inductor suits switch-mode power supplies.
Inductors

Resonant Inductor suits switch-mode power supplies.

Based on Hyper-X Magnetic Technology(TM), Litz wire-free HXLR18002 is designed for switch-mode power supplies using high performance resonant mode controllers. With inductance of 150 Â-µH and minimum energy capacity of 400 µJ at 75 kHz, device provides Qs in excess of 400 from 150-400 kHz. Product is suited for use in commercial, industrial, telecommunications, and military...

Read More »
Boost Inductor is suited for switched-mode power supplies.
Inductors

Boost Inductor is suited for switched-mode power supplies.

Designed to improve performance of switch-mode power supplies, HXLB40002 is based on Hyper-X Magnetic Technology(TM), which helps reduce ac losses. It provides 800 W of power in PQ35 package and exhibits dissipation of less than 1% of output regardless of duty cycle. Designed for 100 kHz switching frequency, product features inductance of 300 Â-µH at zero bias and 275 µH min at 6.7...

Read More »
Magnetic Devices are RoHS-compliant and lead (Pb)-free.
Transformers

Magnetic Devices are RoHS-compliant and lead (Pb)-free.

Application-specific, customizable devices are based on Hyper-X Magnetic Technology(TM). Designed for 100 kHz switching frequency, HXLB40002 Boost Inductor offers 300 Â-µH inductance. For up to 500 kHz switching frequencies, HXTF00140 Forward Converter Transformer delivers 1.3 V @ 40 A with DC inputs from 36-72 V. Model HXTR18002 Resonant Transformer works with frequencies from 75-500 kHz...

Read More »
Surface Mount RF Chokes target lighting industry.
Inductors

Surface Mount RF Chokes target lighting industry.

Series HL 8527 can handle high voltage spikes associated with starter circuits and electronic ballasts within lighting industry. With current ratings from 67-50 mAdc, units feature inductance from 16,000-55,000 Â-µH at 79 kHz. Additional applications include RF signal circuitry in communications equipment, medical diagnostic equipment, and industrial process control equipment.

Read More »
SMT Inductors have saturation currents up to 40 A.
Inductors

SMT Inductors have saturation currents up to 40 A.

Measuring 0.255 x 0.270 x 0.071 in., devices in IHLP-2525AH-01 series operate over frequencies to 5 MHz and feature saturation current ranges from 8-40 A. Their lead-free, shielded, composite construction resists thermal shock, moisture, mechanical shock, and vibration. At full rated current, inductors feature inductance drop of less than 20%. Typ DCR values range 3.0-76.6 milliohm over standard...

Read More »
Inductor Series offers DCR values down to 1.5 milliohms.
Inductors

Inductor Series offers DCR values down to 1.5 milliohms.

Featuring 100% lead-free composite construction, IHLM-2525CZ-01 series is supplied in 0.255 x 0.270 x 0.118 in. package. Molded construction allows for protection against electrical shock and is resistant to moisture, salt, and chemicals. Operating over frequency range up to 5 MHz, series is specified for saturation currents from 7-60 A and for typ DCR values up to 102 milliohms. It suits voltage...

Read More »
Inductors are packaged in 0402 and 0603 case sizes.
Inductors

Inductors are packaged in 0402 and 0603 case sizes.

Wirewound, surface-mount Model IMC-0402-01 offers SRF values from 2,100-6,000 MHz over inductance range of 1.0-47.0 nH with minimum Q factor from 26-13. Model IMC-0603-01 features SRF values from 1,000-6,900 MHz over inductance range of 2.0-270 nH, and minimum Q factor from 43-16. Rated DC current ranges from 150-1,360 mA for IMC-0402-01 and 170-700 mA for IMC-0603-01. With operating temperature...

Read More »
Inductors are specified for saturation currents up to 70 A.
Inductors

Inductors are specified for saturation currents up to 70 A.

High-Current Models IHLP-2525EZ-05 and IHLP-2525EZ-01 offer inductance ranges of 0.1-2.2 Â-µH and 3.3-10 µH, respectively. Units measure 0.255 x 0.270 in. with max height profile of 0.197 in. Both occupy standard 2525 footprint while providing typical DCR values from 0.81-53.3 mOhm. Packaged in 100% Pb-free, shielded composite housing, inductors handle high transient current spikes...

Read More »
Gorbel Introduces New Mobile Fall Protection Unit
Sponsored

Gorbel Introduces New Mobile Fall Protection Unit

Providing adequate fall protection is always a critical consideration and one that in many cases can be difficult to ensure. The new Mobile Fall Protection Unit is designed to facilitate positive fall protection in applications that would typically be difficult or impossible to provide with standard methods. To learn all about the advantages and convenience, see our video.

Read More »

All Topics