Thin Film RF Inductor provides tight tolerances.
Fixed Inductors

Thin Film RF Inductor provides tight tolerances.

Offered in 0402 size, surface-mount L0402 provides thin film equivalent of wire-wound inductor, with no constraint in values and inductance range of .82-6.8 nH. Land Grid Array (LGA) packaging and miniature size allow for self-alignment during reflow. Product is suited for automatic assembly in applications such as mobile communications, satellite TV receivers, GPS, vehicle location systems,...

Read More »
Shielded Inductors are rated for operation to 180°F.
Inductors

Shielded Inductors are rated for operation to 180°F.

With rated current ranges from 12-34 Adc at 25°C, surface mount Series HM70 features typical inductance values from .70-2.10 Â-µH, with dc resistance from 1.05-4.71 mohm. Seven package sizes range from 9 x 10.5 mm to 13.5 x 12.9 mm with board-mounted profile from 3.7-5.50 mm. Inductors are suited for underhood automotive and server/router applications that must operate in high...

Read More »
Chip Inductors feature EIA 0201 case size.
Fixed Inductors

Chip Inductors feature EIA 0201 case size.

Measuring 0.6 x 0.3 x 0.3 mm, multilayer Series HK is 100 nH rated, while Series HKQ, with 30% higher Q factor, includes models from 1-10 nH. All provide non-polarized electrodes that allow mounting in any orientation on circuit board. Inductors facilitate high-density PCB mounting by minimizing size of noise-suppression components in cell phone RF circuits, power amplifiers, voltage-controlled...

Read More »
Inductor suits medium/low-frequency resonant circuits.
Inductors

Inductor suits medium/low-frequency resonant circuits.

Model ISC-1008 surface-mount, wirewound, magnetically shielded inductor is rated for operating temperatures of -40 to +85°C. With dimensions of 0.142 x 0.142 x 0.098 in., unit has inductance values from 1.0-1,000 H at 100 kHz with standard tolerance of 20% over range. Rated current ranges from 1,000-30 mA. Device enables surface mounting in close proximity to components on assembly boards...

Read More »
RF Inductors provide COTS alternative to Mil Spec products.
Inductors

RF Inductors provide COTS alternative to Mil Spec products.

Ranging from 0.12-27 Â-µH, Series SMRF 1010 targets RF applications requiring wire bond or surface mount inductors with wrap around gold-plated termination on ceramic base. Units feature current ratings from 880-120 mAdc based on 35°C temperature rise and 90°C ambient temperature. Applications include military communications, such as space, satellite, radio, and GPS systems, as...

Read More »
Variable Inductors

Variable-Linearity Coils suit CRT applications.

Offering extended operation up to 90 kHz, Models 8255 and 8256 are intended for applications having yoke current requirements of 6.0 and 9.0 A, respectively. Units are fingertip adjustable via attached rotating magnet to compensate for standard manufacturing material and other component tolerances. With 0.800 in. footprint and height of 1.30 in., both coils meet UL 94 V-2 requirements and are...

Read More »
Wirewound Coil Inductors withstand temperatures to 200°C.
Inductors

Wirewound Coil Inductors withstand temperatures to 200°C.

Manufactured with magnetic alloy core, DR360, DR361, and DR362 have through-hole wirewound coil design and provide protection against EMI problems in high-current handling applications. Series cover inductance range of 0.8-1,000 mH and withstand temperatures from -55 to +200°C. DCR is specified from 0.003-0.43 Ω max over max current rating from 1.6-38.7 A. Round package sizes range from...

Read More »
Inductors feature self-shielding, molded design.
Inductors

Inductors feature self-shielding, molded design.

Specified for operation to +155°C, Toroid Terminator Series HM55A delivers up to 40 A rated current and inductance values from 0.28-2 Â-µH, with tolerance to ±10%. DC resistance is .72 mΩ Ã‚±5%. Available in 0.406 x 0.254 x 0.228 in. and 0.406 x 0.254 x 0.292 in. sizes, units are suited for use in multiple-phase, synchronous, step-down voltage regulator modules as well as...

Read More »
Inductor offers DCR values down to 0.65 mΩ at 0.19 H.
Inductors

Inductor offers DCR values down to 0.65 mΩ at 0.19 H.

Housed in .402 x .452 x 0.157 in. package, Model IHLP-4040DZ-05 handles high transient current spikes without saturation and operates over frequency range up to 5 MHz. Saturation current and typical DCR values range from 40-60 A and 1.55-0.65 mΩ, respectively, over inductance range of 0.56-0.19 H. Inductance tolerance is 20%. Rated for operating temperature of -55 to +125°C, RoHS-compliant...

Read More »
Sealed Transformers withstand harsh environments.
Transformers

Sealed Transformers withstand harsh environments.

Hermetically Sealed Transformers and inductors feature glass-to-metal hermetically sealed terminals, MIL SPEC paints and finishes, and deep drawn and fabricated enclosures. Quality of epoxies and silicones maximize service life and offer resistance to heat, vibration, and other environmental factors. Suited for military and commercial applications, products meet MIL-T-27 requirements and can be...

Read More »

All Topics