Inductors

Wire-Wound Power Inductors support up to 8 A rated current.

Measuring 8 x 8 mm with 3.8 mm profile, LQH88P_38 series inductors are designed for DC-DC converters that are used in flat screen TVs, set-top boxes, wireless base stations, and other electronic applications. Ferrite resin coating magnetically shields inductors and prevents interference with other devices and circuits. Series comes in inductance values between 1-100 Â-µH and features DC...

Read More »
RF Spiral Inductors target wire-bonded assemblies.
Inductors

RF Spiral Inductors target wire-bonded assemblies.

Inductors in PSC series are designed for RF circuits that require wire bondable components. Available in 5 versions, they offer DCR up to 0.26 W, Q up to 18 at 1,000 MHz, and SRF up to 10.2 GHz. Inductance values range from 1-100 nH. Measuring 0.045 x 0.045 x 0.010 in., lead-free inductors offer power handling to 250 mW and operate over temperature range of -55 to +125°C.

Read More »
Transformers and Inductors
Transformers

Transformers and Inductors

GlobTek is proud to introduce our Transformers Inductors products. These sleek low profile designs can supply up to 300 VA power. All designs meet safety agency approvals (CSA (cUL), TUV/VDE, CE) and are listed with UL. These power components are ideal for Portable Equipment, Communication, Video, Power Tools, Consumer Electronics, Industrial and Medical Equipment. Attractive Small Size, Proven...

Read More »
Miscellaneous Management Systems

Delphi Extends Its Engine Management Systems Range in Strategic Product Families

Delphi extends its coverage up to 80% by introducing more than 40 new part numbers in 3 product lines PARIS, France - Delphi is launching 40 new part numbers in three key product lines in EMS (Engine Management Systems) to meet rising demand for its OE-quality replacement EMS components. Extensions include ignition coils, mass air flow sensors, and manifold pressure sensors. Delphi's ignition...

Read More »
Common Mode Choke Coil is designed for USB 3.0 applications.
Inductors

Common Mode Choke Coil is designed for USB 3.0 applications.

With 1.2 x 1.0 mm footprint and 0.9 mm (max) profile, CM01S600 features precise wire-wound structure that enables delivery of 10 GHz typ cut-off frequency. It provides noise suppression characteristics without distorting wave pattern of high-speed differential signal interface. Along with 60 X @ 100 MHz typ common mode impedance, characteristics include 0.4 X max DC resistance, 300 mA max rated...

Read More »
Fixed Inductors

Wirewound Chip Inductors suit DC-DC converter applications.

Series LQH3NP_J0 series wirewound chip inductors has low profile (1.2 mm max), and is available in 1.0-47 Â-µH denominations. The series features low DC resistance, down to 0.040 Ohm, and rated current up to 1.62 A is supported. All parts are magnetically shielded to avoid electromagnetic interference with surrounding circuitry. Maximum footprint is 3.2 x 3.2 mm.

Read More »
Ceramic Inductors target aerospace and military markets.
Fixed Inductors

Ceramic Inductors target aerospace and military markets.

Suited for mission-critical applications, ML Series 0603-size inductors offer inductance values of 47 nH to 22 Â-µH and Q ratings as high as 50 at 250 MHz with self resonant frequencies as high as 16 GHz. Ceramic construction provides high current handling, while high-temperature encapsulant enables operation in ambient temperatures from -55 to 155°C. Featuring COTS Plus,...

Read More »
Coils suit solenoid valves in hazardous environments.
Fixed Inductors

Coils suit solenoid valves in hazardous environments.

Suited for use in Lucifer stainless steel solenoid valves as well as brass and aluminum X valves, d mb" and "ia" ATEX-certified 37 mm Electrical Coils meet T6 temperature classes. Stainless steel fittings and IP67 protection level permit coils to be used where ambient constraints are hard, aggressive, and sometimes corrosive. By using booster technology for "ia" product, current consumption is...

Read More »
Inductors

Round Wire Coil Power Inductors resist thermal aging.

Measuring 7.6 x 7.4 x 6.4 mm, Model PG0871NL features DCR of 1.5-31.5 mW and tolerance of ±8%, with inductance values from 0.46-10.5 Â-µH and saturation current from 6.3-28 A. Measuring 10.8 x 9.2 x 8 mm, PG0702NL offers DCR of 0.68-7.7 mW with tolerance of ±6%, inductance values of 0.30-6.8 µH, and saturation current of 8.5-42 A. Both SMT units operate in temperatures...

Read More »
Radial Leaded Inductors handle temperatures of -20 to +80°C.
Inductors

Radial Leaded Inductors handle temperatures of -20 to +80°C.

Designed to provide EMI/RFI protection in current handling applications up to 8.4 A, DR217 Series is available with inductance range from 1.0 Â-µH to 150 mH depending on model, and DCR of 0.008-520 W maximum over maximum current rating from 8.4-0.045 A. Inductors feature through-hole wirewound coil design, and come in round packages sized from 0.196-0.551 in. dia, with lead spacing from...

Read More »

All Topics