Dual Winding Inductor may be configured multiple ways.
Inductors

Dual Winding Inductor may be configured multiple ways.

Suited for use in consumer electronics, surface-mount HM78D Series can be configured as inductor, common mode choke, or DC/DC converter. It is also specified for use in SEPIC applications and can be configured as 2 single inductors connected in series or parallel or as 1:1 transformer. Rated current inductance from 1.176-4,036 Â-µH when connected in series and 0.33-1,000 µH in...

Read More »
Surface Mount Chokes protect data lines from EMI/RFI.
Fixed Inductors

Surface Mount Chokes protect data lines from EMI/RFI.

Measuring 9.15 x 6.0 x 5.2 mm and 9.15 x 6.0 x 4.8 mm, respectively, low-profile, common mode DR332-1 and -2 Choke Series minimize radiated/common mode conducted emissions on balanced twisted pair transmission lines and pass differential mode dc currents and signals. Operating in temperatures from -40 to +85°C, units feature inductance range of 5-4.7 mH and current range of 2.5-0.2 A....

Read More »
Automotive Power Inductor is rated for 180°C operation.
Inductors

Automotive Power Inductor is rated for 180°C operation.

Featuring powdered iron alloy core material, HA55 Series is designed for automotive underhood environments. Products have current inductance values from 7-20 Â-µH, and recommended frequency is up to 400 kHz, depending on device. Rated current range is from 40-60 A, with saturation current from 43-50 A, and DC resistance is from 1.7-3.35 mW. Operating temperature range starts from -40°C...

Read More »
High Current Inductor is offered in 6767 case size.
Inductors

High Current Inductor is offered in 6767 case size.

Featuring 17.15 x 17.65 mm footprint and 7.0 mm profile, IHLP-6767GZ-01 delivers maximum frequency to 2 MHz, DCR down to 0.63 m typical, and standard inductance values from 0.22-10 Â-µH. It offers saturation current range of 25-129 A, heat rating current range from 12.5-44 A, and handles high transient current spikes without hard saturation. Specified for operating temperature of 55 to...

Read More »
Power Inductors feature military-approved design.
Inductors

Power Inductors feature military-approved design.

Added to military's DSCC Qualified Products List, MLP5025 Series is qualified to MIL-PRF-27/367A, while MLP1812 Series meets MIL-PRF-27/368A, and MLP8527 Series meets MIL-PRF-27/370A. Series MLP5025 features inductance range of 0.22-22,000 Â-µH, 7.00-.050 A current rating, and max DCR of .0080-160 W, while Series MLP1812 features 1.0-330 µH, 1.050-.090 A, and .113-15.240 W, and...

Read More »
Inductors

Winged Inductor has range from 0.10-10 µH.

Featuring profile of 1.2 mm for both sides of cut-out PCBs, IHLW-5050CE-01 offers saturation current range from 14-84 A, typical DCR from 0.8-30.4 mW, and maximum DCR from 0.96-34 mW. With frequency range up to 5 MHz, product can be used for voltage regulator module and dc-to-dc converter applications. RoHS-compliant, it is specified for operating temperature range of 55-125°C and offers...

Read More »
High Energy Chokes are suited for renewable energy industry.
Inductors

High Energy Chokes are suited for renewable energy industry.

Offered in 3 different formats: 100, 120, and 180 mm high, and 100 and 120 mm in dia, POT CORE series can be used both as input and output chokes for solar, wind, and fuel-cell inverter applications. Due to its completely shielded format, series is ideal solution to avoid electromagnetic noise through choke. Available in one- or two-cell format (dual inductor), products have current capability of...

Read More »
Inductors feature operating temperature range of -40 to 85°C.
Inductors

Inductors feature operating temperature range of -40 to 85°C.

Suited for low and medium current applications and high density circuits, RoHS compliant, low DC resistance 1100R and 1300R series are fully backward compatible with Sn/Pb soldering systems. Measuring 4.0 mm dia x 5.5 mm, 1100R series offers inductance values ranging from 1.0-470 Â-µH and has maximum current ratings of 0.14-3.0A. Series 1300R measures 8.0 mm dia x 10 mm, has inductance...

Read More »
Wire-Wound Power Inductors offer low-profile, high current.
Fixed Inductors

Wire-Wound Power Inductors offer low-profile, high current.

Measuring 3.2 x 2.5 x 1.7 mm, BRL3225 series is comprised of 7 wire-wound chip inductors used for switch-mode DC/DC converter applications in high-current-use devices. Each employs sleeveless square-core winding that eliminates wasted space and thickens lead wire inside inductor to achieve lowest possible DC resistance (down to 0.043 W). From EIA 1210 form factor, models offer inductance values...

Read More »
Inductors

High Current Inductor features 2.0 mm profile.

With frequency range up to 1 MHz, IHLP-2020BZ-11 offers inductance range from 0.10-10 Â-µH, saturation current from 2.0-25 A, typical DCR from 2.7-169.3 mW, and maximum DCR from 2.9-182.8 mW. It is suited for voltage regulator modules and DC-DC converter applications and is qualified to AEC-Q200 standards. Packaged in 2020 size case, device operates from 55-125°C and resists thermal...

Read More »

All Topics