Fixed Inductors

Inductors: Sample Kit with Current-Compensated Ring Core Power Chokes

TDK-EPC, a group company of the TDK Corporation, presents a new sample kit of EPCOS current-compensated ring core power chokes. These EMC components are designed for a voltage of 250 V AC and offer current capabilities of between 0.4 and 6.0 A. Their inductances are between 0.2 and 39 mH. The power chokes of the series B82721* are designed for the suppression of common-mode interference in...

Read More »
Compact Power Inductors offer optimized DC bias characteristics.
Inductors

Compact Power Inductors offer optimized DC bias characteristics.

With respective DC resistance ranges of 0.070-0.265 W and 0.09-0.33 W, BRL2515 measures 2.5 x 1.5 mm with max height of 1.2 mm and BRFL2518 measures 2.5 x 1.8 mm, with max height of 1.0 mm. Both RoHS-compliant, wire-wound power inductors operate from -25 to +105°C and are designed for DC-DC converter applications in mobile devices such as cell phones, smart phones, DSCs, and portable music...

Read More »
Hearing Aid Telecoil is mobile phone compatible.
Copper

Hearing Aid Telecoil is mobile phone compatible.

Model TP0602 allows hearing aid compatibility with mobile phones and has inductance values from 40-170 mH. Ferrite core material provides stable performance over -10 to +40Â-ºC temperatures and unit is wound with copper wires with less than 25 micron dia. Achieving high sensitivity to magnetic field in 1 kHz frequency, SMT unit is useful in telephone communication because it permits volume...

Read More »
Military-Approved RF Inductors offer 0.01-27 µH range.
Inductors

Military-Approved RF Inductors offer 0.01-27 µH range.

QPL approved to MIL-PRF-83446/04, MLRF1010 Series includes surface mount inductors with Q min from 22-60, SRF min from 22-2,700 MHz, DCR max from 0.06-6.9 W, and DC current rating from 120-1,270 mA. Measuring .100 x .100 in, inductors are suited for RF applications including communication, guidance and security, as well as radar, test and evaluation, in military, aerospace, and defense...

Read More »
Inductors

Low-Profile, High-Current Inductors come in 1212 case size.

Supplied in 3.0 x 3.6 x 2.0 mm package, IHLP®-1212BZ-11 has frequency range up to 1.0 MHz and is suited for voltage regulator module (VRM) and DC/DC converter applications in range of end-products. Standard inductance and saturation current values respectively range from 0.22-1.5 Â-µH and 4.0-7.5 A, while typical and max DCR are respectively rated from 9.5-27.0 mW and 11.4-32.0 mW....

Read More »
Inductors

Power Inductors are suited for DC-DC converters/power supplies.

Model SDE6603 power inductor offers inductance range of 1-1,000 Â-µH with Irms current up to 2.9 A, while SRE6603 has inductance range of 1-10,000 µH with Irms current up to 3 A and is magnetically shielded, making it suitable for applications where low noise and longer battery life are essential. Both models have unit height of 2.9 mm and are RoHS compliant.

Read More »
Fixed Inductors

Chip Inductors replace wire-wound units in DC-DC converters.

Designed specifically for miniaturization of DC-DC converters in LCD TVs and set top boxes, LQH6PP_43 Series features 2424 size casing measuring 6.0 x 6.0 x 4.3 mm. Magnetically shielded units range from 1.0 Â-µH model with DC resistance of 0.009 W to 100 µH model with DC resistance of 0.436W. Allowable DC current, based on inductance change within 30% of nominal, is 7.50 A for 1.0...

Read More »
Inductors

Wirewound Power Inductors feature thin profile.

Suited for LED backlighting in notebook and netbook PCs, NRS6010 Series measures 6.0 x 6.0 mm with max height of 1.0 mm, while Series NRS5012, suited for hard disk drives smaller than 2.5 in. and digital still cameras, measures 5.0 x 5.0 mm with max height of 1.2 mm. NRS6010 Series features rated current of 1.0 A (DC bias allowed current at inductance of 10 Â-µH), while NRS5012 Series has...

Read More »
Inductors

Flat Wire Power Inductors carry 15 and 60 A current ratings.

Models SRP4020 and SRP7030F utilize flat wire within molded magnetically shielded housing. Measuring 4.8 x 4 x 2 mm, SRP4020 features inductance range of 0.22-2.2 Â-µH with heat rating current up to 10 A and saturation current to 15 A. With dimensions of 7.6 x 6.5 x 3.2 mm, SRP7030F offers inductance range of 0.1-10 µH with heat rating current up to 32 A and saturation current to 60...

Read More »
Precision Machining Solutions with Over 25 Years of Experience
Sponsored

Precision Machining Solutions with Over 25 Years of Experience

Quality, customer service, and unbeatable value are the hallmarks of Hogge Precision. Since 1989 we have built a reputation as the go-to precision machining source, servicing many demanding industries. For CNC machining and screw machining, there are few manufacturers that can match our capabilities and expertise. See our video to learn more.

Read More »

All Topics