RF Chip Inductors are available with ceramic or ferrite cores.
Fixed Inductors

RF Chip Inductors are available with ceramic or ferrite cores.

Capable of operating from -55 to +125°C, RoHS-approved Series 5406 comprises 0603-size wire-wound chip inductors available with ceramic or ferrite core construction. Inductance values from 1.5–470 nH for ceramic and 470–2,700 nH for ferrite. Q ratings are as high as 80 at 800 MHz with Self Resonant Frequencies as high as 6 GHz for ceramic and 600 MHz for ferrite. Areas of use include...

Read More »
Multilayer Ceramic Chip Inductors feature low DC resistance.
Fixed Inductors

Multilayer Ceramic Chip Inductors feature low DC resistance.

Supplied in standard surface mount footprint, RF Ceramic Inductors include Series 0201CC, 0402CC, and 0402CH with inductance ranges of 1.0–100 nH, 1.0–270 nH, and 1.0–15 nH, respectively. Units are made of monolithic non-organic substance that gives them tight tolerance. High Q value provides consistent, stable signal transmission at highÂ- frequencies. Applications...

Read More »
REO-USA CNW 903 and CNW 905 Line Reactors Provide Key Performance and Market Advantages
Variable Inductors

REO-USA CNW 903 and CNW 905 Line Reactors Provide Key Performance and Market Advantages

Patented technology and an inductance edge can deliver documented ROI INDIANAPOLIS – Indianapolis-based REO-USA has a pair of line reactors that other manufacturers can't match. Like many in the marketplace, the CNW 903 and CNW 905 address voltage and current issues and attenuate harmonics in variable frequency drive (VFD) systems, helping to extend VFD and motor service life. But the company...

Read More »
AVX Secures Six Slots on the 2014 Electronic Design Top 101 Components List
Electrical Connectors

AVX Secures Six Slots on the 2014 Electronic Design Top 101 Components List

Editors readers of Electronic Design have recognized AVX capacitors, connectors, inductors, & varistors as some of the most innovative & useful components of 2014 GREENVILLE, S.C. — AVX Corporation, a leading manufacturer of passive components and interconnect solutions, is honored to have secured six slots, representing eight total new product series, on the 2014 Electronic Design Top 101...

Read More »
Flat Wire High Current Inductors operate up to 356°F.
Inductors

Flat Wire High Current Inductors operate up to 356°F.

Rated to Insulation Class H, high current inductors and inductor modules range from few microhenries to over 1 mH and from 30Â- A to >500 A; currents up to 1,000 A are available for custom designs. Compact, flat wire design optimizes thermal management, which promotes performance and reliability. Insulated to minimum of 100 MΩ at 1,500 Vac between coil and core,...

Read More »
Common Mode Chokes target automotive networks.
Fixed Inductors

Common Mode Chokes target automotive networks.

Providing EMC/EMI protection for automotive electronics, HOT ROD AE20xx I-Bar Chokes meet Broadcom® Corporation's BroadR-Reach® Automotive Ethernet technology for mode conversion up to 400 MHz. Devices are used for noise suppression on Ethernet-based networks transmitting data, video, and voice over single unshielded twisted pair within vehicle. Measuring 4.5 x 3.2 x 2.8 mm, chokes...

Read More »
High Current Inductors feature flat wire coil.
Inductors

High Current Inductors feature flat wire coil.

Ranging from 3.3–33 Â-µH with saturation current rating up to 95 A, H1000 Series is suited for high-power, high-current applications where temperature can effect performance. Inductors feature flat wire coil construction which offers thermal management and heat dissipation. To maximize board space or meet strict height requirements, inductors are available in both vertical and horizontal...

Read More »
Resistors

Vishay Intertechnology to Exhibit Leading High-Frequency, Precision, and Wire-Bondable MLCCs, Resistors, and Inductors at IMS2014

MALVERN, Pa.Â- – Vishay Intertechnology, Inc. (NYSE: VSH) today announced its technology lineup for the 2014 IEEE MTT International Microwave Symposium (IMS2014), being held from June 1-6 at the Tampa Convention Center in Tampa Bay, Florida. At the conference and exhibition, the company will be highlighting its latest industry-leading multilayer ceramic chip capacitors (MLCCs) and...

Read More »
Electric Shunts

Vishay Intertechnology to Showcase Wide Range of Industry-Leading Technologies at PCIM Europe 2014

MALVERN, Pa. — Vishay Intertechnology, Inc. (NYSE: VSH) today announced its technology lineup for PCIM (Power Conversion Intelligent Motion) Europe 2014, taking place May 20-22 in Nuremberg, Germany. In booth 9-212 at the Exhibition Centre Nuremberg, the company will be highlighting its latest industry-leading semiconductor, optoelectronics, and passive component technologies for a variety of...

Read More »

All Topics