Induction Heaters

Induction Heaters

Pillar Delivers Six (6) Induction Systems to Silicon Carbide (SiC) and Pyrolytic Graphite Coating Producer

Pillar Induction has commissioned six (6) new induction heating systems used in the chemical vapor deposition (CVD) process for the production of silicon carbide (SiC) coated graphite products used in the aircraft / aerospace, industrial and semiconductor industries. The new landmark installation consists of six (6) Pillar MK-8 power supplies consisting of five (5) 125 kW and one (1) 300 kW,...

Read More »
Induction Heaters

Pillar Induction Delivers 11.8MW Heating System for Austenitizing Pipe

PipePillar Induction has commissioned a new 11.8 MW induction heating installation at a leading pipe producer in the southwest United States. The new installation consists of a total of eighteen (18) induction heating coils providing progressive heating of 2.375 to 7" OD pipe with production up 35 metric tons/hr. The pipe is moved through the coils powered by a single pinch wheel drive and...

Read More »
Ambrell Installs Induction Heating System for Fastener Manufacturer
Induction Heaters

Ambrell Installs Induction Heating System for Fastener Manufacturer

With aerospace companies requiring process heating data for quality control purposes, Ambrell was able to offer a comprehensive package to enable the client to meet that requirement Scottsville, NY - Ambrell, a leading manufacturer of induction heating systems, has installed an EKOHEAT 65kW/100 kHz induction heating system for a leading fastener manufacturer. The system enables the client to hot...

Read More »
Ambrell Delivers Preheating Solutions to Oil and Gas Well Drill Bit Manufacturers
Induction Heaters

Ambrell Delivers Preheating Solutions to Oil and Gas Well Drill Bit Manufacturers

Drill bit manufacturers are finding that induction is an efficient method for rapidly preheating drill bits to temperature. Cottsville, NY - Ambrell, an Ameritherm company and a leading manufacturer of induction heating systems, has recently delivered systems to leading drill bit manufacturers. The drill bits commonly range from 203-508mm (8-20 ) in diameter. The systems are used to preheat drill...

Read More »
KFJ Trading Turns to ITC and Ambrell for Melting
Induction Heaters

KFJ Trading Turns to ITC and Ambrell for Melting

The metals melting firm turned to ITC for three melting systems with Ambrell induction power supplies Scottsville, NY - Ambrell, an Ameritherm company and a leading manufacturer of induction heating systems, is pleased to announce that KFJ Trading of Los Angeles, CA turned to Induction Technology Corporation (ITC) for three melting systems that included Ambrell induction power supplies. Ambrell...

Read More »
Induction Heaters

Ambrell to Exhibit at FABTECH 2012

A live automated preheating system will be on-hand along with an EASYHEAT for manual demos Scottsville, NY - Ambrell, an Ameritherm company and a leading manufacturer of induction heating systems, will exhibit at FABTECH 2012 on November 12-14 at the Las Vegas Convention Center in Las Vegas, NV. Representatives will discuss potential induction heating applications and demonstrate induction...

Read More »
Nakashimada Partners with Ambrell for Induction Heating
Induction Heaters

Nakashimada Partners with Ambrell for Induction Heating

The new, cutting-edge Nakashimada Hot Former leverages Ambrell's EKOHEAT induction heating system Scottsville, NY - Ambrell, a leading manufacturer of induction heating systems, is pleased to announce that it has partnered with Nakashimada to supply induction heating systems. Nakashimada is using the Ambrell EKOHEAT induction heating system within its new NP121HF Hot Former hot forming system....

Read More »
Bench Top Induction Heater handles components up to 88 lb.
Induction Heaters

Bench Top Induction Heater handles components up to 88 lb.

Featuring 3.6 kVA rating, BETEX 22 ESD Model TB-280620S is designed for heating bearings, pulleys, coupling, and rings so they can be mounted in maintenance and/or production applications. Unit accepts components with minimum ID of .59 in. and max OD of 13.38 in. Digital electronics ensure optimum control during heating process. To ensure even and rapid heating, controller automatically regulates...

Read More »
Induction Heaters

Ambrell will offer an Automated Precision Heating Demonstration at IMTS

Ambrell and Nutek Industrial Systems - part of the Ambrell Hardening Group - have created a preheating demonstration that involves heating stainless steel tubes with a robot Scottsville, NY - Ambrell, an Ameritherm Company and a leading manufacturer of induction heating systems, is exhibiting at IMTS on September 10-15 at McCormick Place in Chicago, IL. At the event, Ambrell and Nutek Industrial...

Read More »
Induction Heaters

Ambrell to Attend IMTS; Discuss High-Power Induction Heating Solutions

Heating demonstrations will take place on the show floor, and attendees can discuss their heating applications and sign up for a free parts test Scottsville, NY - Ambrell, an Ameritherm Company and a leading manufacturer of induction heating systems, is exhibiting at IMTS on September 10-15 at McCormick Place in Chicago, IL. At the event, Ambrell will exhibit its solutions, review attendees'...

Read More »
Locon Sensors Withstand Extreme Temperatures
Sponsored

Locon Sensors Withstand Extreme Temperatures

Locon Sensor Systems offer robust sensor solutions for even the most severe environmental conditions. Their line of high-temp inductive sensors and their cylindrical photoelectric series can operate in temperatures up to 250 degrees Celsius. See our video to learn more.

Read More »

All Topics