Induction Heaters

Ambrell to Exhibit at HOUSTEX 2019 in Houston, TX USA
Induction Heaters

Ambrell to Exhibit at HOUSTEX 2019 in Houston, TX USA

See an induction heating demonstration and speak to Dr. Dahake from THE LAB Rochester, NY — Ambrell, an inTEST Company and a leading manufacturer of induction heating solutions, will exhibit at HOUSTEX once again. The show will take place February 26-28 at the George R Brown Convention Center in Houston, TX USA and representatives will be on-hand in booth 1442. At the booth, induction heating...

Read More »
UltraFlex De-Brazing and Brazing Carbide Tips Using Induction Heating
Induction Heaters

UltraFlex De-Brazing and Brazing Carbide Tips Using Induction Heating

Jan 29th, 2019 - In a recent customer-requested test application, UltraFlex Power Technologies proved the efficiency of de-brazing and re-brazing carbide tips onto milling cutter tools using an induction heater. UltraFlex manufactures the most advanced digitally controlled induction heating solutions in the industry and its engineers were confident that induction heating would reduce the time...

Read More »
UltraFlex using a Handheld Induction Heater to Braze Steel Mesh Belts
Induction Heaters

UltraFlex using a Handheld Induction Heater to Braze Steel Mesh Belts

[Jan 7th, 2018] Induction solutions are already successfully replacing torch-based brazing in a variety of manufacturing applications - this has been the engineers’ conclusion after recent UltraFlex demonstrations aimed at showing the induction-based brazing process for two magnetic steel mesh belts. The demonstration had been carried out per request of a potential UltraFlex customer, currently...

Read More »
UltraFlex Preheating Stainless Steel with Induction Heater
Induction Heaters

UltraFlex Preheating Stainless Steel with Induction Heater

[Nov 26th, 2018] Another successful application of Induction heating for manufacturing purposes has recently been demonstrated by UltraFlex Power Technologies. The company - provider of the most innovative digitally controlled induction heaters in the industry - showed how a stainless steel cylinder could be heated at different temperature on the inside and outside, within less than a minute. The...

Read More »
UltraFlex Demonstrates Hardening and Tempering of Alloy Steel Chains Using Induction
Induction Heaters

UltraFlex Demonstrates Hardening and Tempering of Alloy Steel Chains Using Induction

[Nov 2nd, 2018] UltraFlex Power Technologies recently published the results from yet another test application of induction heating for manufacturing purposes. In the test, industrial chains made up of alloy steel had to be hardened and tempered using induction heating, at temperatures of 1580˚F (860˚C) and 204˚F (400˚C) respectively. UltraFlex provides the most advanced digitally controlled...

Read More »
New Demonstration by UltraFlex Shows Bore Heating of a Steel Pipe Using Induction
Induction Heaters

New Demonstration by UltraFlex Shows Bore Heating of a Steel Pipe Using Induction

[Oct 22nd, 2018] In pursuit of proving the limitless possibilities of induction heating for manufacturing purposes, UltraFlex Power Technologies has demonstrated how bore heating of a steel pipe could be achieved using induction heating. UltraFlex provides the most advanced digitally controlled induction heating solutions in the industry and is regularly coming up with proofs of how induction...

Read More »
UltraFlex Demonstrating Hardening of Push and Plane Rods Using Induction Heating, at Temperature 1508˚F - 1742˚F (820˚C - 950˚C)
Induction Heaters

UltraFlex Demonstrating Hardening of Push and Plane Rods Using Induction Heating, at Temperature 1508˚F - 1742˚F (820˚C - 950˚C)

[Oct 10th, 2018] UltraFlex - a leading induction heating solutions provider - has demonstrated the hardening of a push rod and plane rod using induction heating, at temperature of 1508˚F–1742˚F (820˚C – 950˚C). The hardening process is yet another application of induction heating demonstrated by UltraFlex engineers, using the company’s proprietary, advanced digitally controlled...

Read More »
UltraFlex Induction Heater Used to Harden a Steel Gun Barrel
Induction Heaters

UltraFlex Induction Heater Used to Harden a Steel Gun Barrel

[Sept 11th, 2018] New tests performed by UltraFlex Power Technologies revealed the results achieved when an induction heater was used for hardening of a 4140 steel gun barrel. The ultimate goal of the tests was to heat a small block section of a gun barrel to 1500◦F (815◦C) and quench it in oil, identifying the best possible induction coil and equipment settings for the process. An advanced...

Read More »
UltraFlex Heating Wires to 204°C (400°F) in 0.8 seconds Using Induction Heating
Induction Heaters

UltraFlex Heating Wires to 204°C (400°F) in 0.8 seconds Using Induction Heating

[May 2nd, 2018] UltraFlex - provider of the most innovative digitally controlled induction heating solutions in the industry - shared the results from their recent induction heating tests performed on wires with different diameter. Using the company’s proprietary induction heating equipment - an UltraHeat 10 kW power supply and a HS8LF Heat Station - UltraFlex successfully heated wires of 4...

Read More »
Un-Brazing and Re-Brazing Copper Angle Brackets to Copper Strips at 1400°F (760°C) in Less than a Minute Using UltraFlex Induction Heating
Induction Heaters

Un-Brazing and Re-Brazing Copper Angle Brackets to Copper Strips at 1400°F (760°C) in Less than a Minute Using UltraFlex Induction Heating

December 4th, 2017 - The efficiency of UltraFlex Power Technologies Induction Heating systems has recently been demonstrated by the company’s engineers in a series of controlled tests. The goal of the tests was to evaluate the unbrazing and rebrazing capabilities of UltraFlex High Power Induction System from the UltraHeat L Series. Two sets of materials were used for the tests: a copper right...

Read More »
Paratherm™ HR Heat Transfer Fluid: Higher Temperature Stability Leads to Longer Fluid Life
Sponsored

Paratherm™ HR Heat Transfer Fluid: Higher Temperature Stability Leads to Longer Fluid Life

For the ultimate in heat transfer fluid performance, Paratherm offers HR Heat Transfer Fluid that is engineered specifically for closed loop liquid phase heating. When it comes to characteristics such as thermal stability and fluid degradation, Paratherm HR leads the industry in value and performance. See our video to learn how Paratherm is raising the bar for heat transfer fluids.

Read More »

All Topics