Induction Heaters

Induction Heating System is suited for nanoparticle research.
HVAC

Induction Heating System is suited for nanoparticle research.

Used to heat vials containing nanoparticles in research applications, nano-llite UPT-n3 has 3 kW of power and operates with frequencies from 30–300 kHz. Unit supports in vivo and in vitro experiments. Custom coils, exclusively developed for nanoparticle research, optimize magnetic field strength, which is key parameter for heating nanoparticles.

Read More »

Ambrell Sells EASYHEAT for Catheter Tipping
Electrical Equipment & Systems

Ambrell Sells EASYHEAT for Catheter Tipping

A client returns to Ambrell for another unit for a medical application to meet increasing demand Scottsville, NY – Ambrell, a leading manufacturer of induction heating systems, has sold an EASYHEAT 4.2 kW/150-400 kHz induction heating system for a catheter tipping application in the medical industry. The process involves heating an aluminum catheter tipping die to 500 °F (260 °C) and then...

Read More »

Ajax TOCCO Delivered (4) Four Portable Induction Bolt Heating Systems for On-Site Maintenance Service of Large Gas Turbines
Electrical Equipment & Systems

Ajax TOCCO Delivered (4) Four Portable Induction Bolt Heating Systems for On-Site Maintenance Service of Large Gas Turbines

During the maintenance of large gas turbines, technicians must remove large bolts which have become corroded and difficult to unfasten. Typically a large cumbersome hydraulic wrench is required to provide the 6800 Nm (5000 ft-lbs) of torque required to break the corrosive bonds between the 100 mm heavy hex nuts and bolts. To improve the productivity of this process, Ajax TOCCO Magnethermic has...

Read More »

Ambrell Sells an EASYHEAT to a Fastener Manufacturer
HVAC

Ambrell Sells an EASYHEAT to a Fastener Manufacturer

Ambrell Sells an EASYHEAT to a Fastener Manufacturer The client will use the system for heat treating nuts of various sizes with automation Scottsville, NY — Ambrell, a leading manufacturer of induction heating systems, sold an EASYHEAT 4 kW 150-400 kHz induction heating system to a fastener manufacturer for a nut heat treating application. The client will use the EASYHEAT within an automated...

Read More »
How to Effectively and Efficiently Clean Heat Exchangers, Part I
Sponsored

How to Effectively and Efficiently Clean Heat Exchangers, Part I

For refineries and petrochemical plants, cleaning heat exchangers is a dirty job but somebody has to do it. While there are many approaches on how to clean shell and tube heat exchangers, it is indisputable that the right method is absolutely critical for ensuring that equipment is fully operational. Otherwise, you could end up with a potential equipment shutdown, which will cost you time and money. In this three-part series, you will learn about the various benefits, methods, and obstacles involved in heat exchanger cleaning. Part one introduces the fundamentals of cleaning, as well as explores the pros and cons of on-site versus off-site services. Download the first of this three series to assist you in finding the best solution for your dirty job here.

Read More »
Electronic Components & Devices

Energy Savings with New Induction Units

More efficient air conditioning without loss in comfort Tobias Lorson's goal is lower energy input without a reduction in comfort level. The team leader in Facility Management at Robert Bosch GmbH sees a promising path to more energy efficiency in the refurbishment of the old induction system. Operational tests with the manufacturer LTG of Stuttgart, Germany in two test rooms have shown the...

Read More »

Ambrell Sells EKOHEAT for Wire Heating Application
HVAC

Ambrell Sells EKOHEAT for Wire Heating Application

The induction system will be used to heat various size copper wires for coating curing Scottsville, NY – Ambrell, a leading manufacturer of induction heating systems, has sold an EKOHEAT 60 kW/30 kHz induction heating system for a wire heating application. The client needed to heat various sizes of copper wire to 325 °C (617 °F) at a rate of 10 meters (32.8 feet) per minute. The client took...

Read More »

Ambrell Sells EKOHEAT for a Casting Application
Electrical Equipment & Systems

Ambrell Sells EKOHEAT for a Casting Application

The induction system will be used to melt heavy metals in a graphite furnace Scottsville, NY – Ambrell, a leading manufacturer of induction heating systems, has sold an EKOHEAT 50 kW/10 kHz induction heating system for a casting application. The client requires a melt 23 kg of heavy metals in a graphite furnace. The induction coil is put close to the crucible for this application and there is...

Read More »

Ambrell Sells EASYHEATs for Oil Industry Application
HVAC

Ambrell Sells EASYHEATs for Oil Industry Application

The induction systems will be used to braze carbides onto steel to create pipe grippers Scottsville, NY — Ambrell, a leading manufacturer of induction heating systems, has sold two EASYHEAT 10 kW, 150-400 kHz induction heating systems to a manufacturer of pipe grippers for the oil and gas industry. The heating application involves heating two grippers in one coil. Two parts or grippers –...

Read More »
Electronic Components & Devices

Replacement Wall Induction Units

Ideal for new Installations or Retrofit Projects. Forget all you know about induction technology! With induction units of the latest generation, issues of the past such as high energy consumption, control problems and high noise levels have been solved completely. LTG's induction units HFG are an ideal solution for energy saving retrofits: • Low maintenance and long product life time (no...

Read More »

Ambrell Sells Induction Heating Systems for Thread Rolling
HVAC

Ambrell Sells Induction Heating Systems for Thread Rolling

EASYHEAT systems were sold to be integrated into a thread rolling process abroad Scottsville, NY — Ambrell, a leading manufacturer of induction heating systems, has sold two EASYHEAT 10 kW induction heating systems for thread rolling to manufacture fasteners for the aerospace industry. The application involves rolling an array of materials including Inconel, Hastealloy and Titanium. The outer...

Read More »
How SpinSelect Can Save You Time and Money
Sponsored

How SpinSelect Can Save You Time and Money

Thanks to the unique SpinSelect Multi-Pocket selectable quick change tool holder, its time to rethink the range, complexity and volume of parts that your lathe can produce. Our Spin-Select tool was created to increase productivity and consistency by decreasing downtime associated with lathe cutting tool and insert setups or changeovers. This product is a game-changer for the industry and were pleased to show you why.

Read More »

All Topics