New Phase Sequence and Motor Rotation Indicator is Rated CAT III 600V
Features tri-colored banana leads, alligator clips, soft carrying case and a durable over molded holster protecting meter from debris and damage. Phase sequence indicators illuminate when three phase power is detected and phase sequence orientation for three-phase power sources. Motor rotation illuminates clockwise or counterclockwise motor rotation LED indicators to detect incorrect wiring.
Read More »
Dialight Presents Snap-In Panel Mount LED Indicators That are Terminated with 22 AWG UL1007
Offered in 653 and 654 series models that are designed for 14.7 mm and 16.7 mm mounting holes and compatible with panel thicknesses ranging from 0.7mm to 3.5 mm. Features high-intensity LEDs with polycarbonate colored lenses and produces 100,000 hrs uniform illumination. Operated in -20°C to +80°C and compatible with 12v and 24v DC drive circuits.
Read More »
New 185 Rival is a High-quality Economical Durable Weight Indicator with Bright-green LCD for Easy Viewing
Powered by six standard, off-the-shelf AA Alkaline, rechargeable Ni-Cad or NiMH batteries. 1-in/25-mm high bold green LCD is visible from a distance and can be used as a remote display. Used in commercial foodservice, general weighing, warehouse, distribution facility floor scales, recycling, outdoor materials weighing and industrial vessel weighing applications.
Read More »
New Plastic Tonelight Indicators Delivers Both Audible and Visual Warning Signal
The TRIP-LB200P Plastic Tonelight Indicators are suitable for alarms, low-voltage, low-pressure, high-radiation, dangerous conditions and liquid detector applications. The products feature four-position terminal blocks-two for RED LED and two for AUDIO ALARM. The indicators are offered with lens in standard (red) and optional colors (green, yellow, orange, blue and white). They can be operated in...
Read More »
How to Effectively and Efficiently Clean Heat Exchangers, Part I
An introduction to a three part series about the importance, benefits, and methods of cleaning heat exchangers.
Read More »
WIKA Mobile Control Installs qSCALE I2 LMI on SMF Boom Trucks
Structural Metal Fabricators, Inc. (SMF) has partnered with WIKA Mobile Control (WMC) to install the qSCALE I2 load moment indicator on their 10, 15 and 20 ton boom trucks. This system provides the operator with a display of the current load and geometric information, including the actual and allowable load, boom length, boom angle, and load radius. “The qSCALE I2 load moment indicator system...
Read More »
WIKA Mobile Control Installs qSCALE I2 LMI on XTREME Telehandler
Alden Equipment was recently awarded a government contract to deliver sixty (60) XTREME XR5919 telehandlers. Alden Equipment partnered with WIKA Mobile Control (WMC) to install a qSCALE I2 load moment indicator (LMI) on each of the telehandlers. This system provides the operator with a display of the current load and geometric information, including the actual and allowable load, boom length,...
Read More »
Littelfuse, Inc. Introduces the Polyswitch setP Series to Protect Charging Cables from Overheating
Littelfuse’s Polyswitch setP Series is designed to protect cables used for 15W, 60W or 100W operations. The product series features compatibility with conventional assembly and modling operations, no disruption of communication channels and safety for users. The Polyswitch setP Series has applications for USB Type-C connectors and power supplies with attached USB-C cables.
Read More »
New Starrett 2700 Indicators Can Store and View up to 200 Readings
The Starrett 2700 Indicators are available in a single LCD Numeric IQ model or a Numeric/ Analog AD model. The units come with 270 degree rotating bezel and 1.70 in. diameter. The indicators (F2715 models) offer 10 mm travel, an accuracy of 0.002 mm whereas the F2714 models provide an accuracy of 0.004 mm. The 2700 indicators are output-compatible for SPC documentation via cable or wirelessly...
Read More »
New SmartLight Indicator Offers Full Control of Standard Colors
Balluff’s Visual Indicator improves responsiveness, repeatability and reliability. Unit is operated in 1, 2, 3 or 6 segments. Indicator's Level mode displays multiple colors for low and high values whereas in run/wait mode unit indicates stoppages and slowdowns. SmartLight Indicator is suitable for use in pick-to-light systems, part placement, part positions and format change guidance.
Read More »
New SIKO AP20S Position Indicator Comes with Extensive Diagnostic Options
SIKO AP20S Position Indicator is suitable for use in production machines such as packing, woodworking and printing. Unit features SIKONET5, CAN data, Profinet, Ethernet/IP, EtherCAT and powerlink interfaces. The indicator is offered with two-line LCD display with acccuracy of up to 0.01 mm and absolute function with internal backup. Unit can be used in detecting position of linear guides when...
Read More »
Cut and Bevel Pipe up to 63" Diameter with a Single Lightweight, Portable Machine
CS Unitec is a leader in power tools designed for industrial applications, with products that set the standard for robust performance and industry-leading reliability. Adding to our long list of innovation is a new line of pipe cutting machines. For cutting and beveling pipe up to 2" in thickness and diameters from 12" to 63", no other cutting system comes close. See our video to learn more.
Read More »
