Indenting Machinery

New KLA-Tencor Nanoindentation Systems are Capable of Conducting Substrate-Independent Measurements
Indenting Machinery

New KLA-Tencor Nanoindentation Systems are Capable of Conducting Substrate-Independent Measurements

The KLA-Tencor Nanoindentation Systems are available in iNano®, iMicro, inSEM® HT and NanoFlip models. The systems are suitable for applications such as semiconductor, thin films, and MEMS (wafer applications), hard coatings and DLC films, composite materials, fibers and polymers. They deliver fast throughput with consistent and reproducible results. The nanoindentation systems offer...

Read More »
Buehler Obtains ISO Certification for Vickers and Knoop Reference Hardness Blocks
Miscellaneous Blocks

Buehler Obtains ISO Certification for Vickers and Knoop Reference Hardness Blocks

The Buehler Wilson® Reference Block Laboratory in Binghamton, NY, has achieved accreditation to ISO/IEC 17025 by A2LA (American Association for Laboratory Accreditation) for Rockwell, Knoop, Vickers and Brinell hardness test blocks and indenters. A2LA is in full conformance with the standards of the International Organization for Standardization (ISO) and the International Electro-Technical...

Read More »
Nano Indenter G200 features tip and sample heater.
Indenting Machinery

Nano Indenter G200 features tip and sample heater.

Measuring nanomechanical properties, Nano Indenter G200 uses high-power diode laser to heat the tip. Designed to purge samples with various gases, unit’s tip and sample heater support RT up to 500 °C temperature range. Equipped with substrate holder, product comes with transparent plate and built-in thermocouple. Indenter is embedded with dual-loop PID controller’s NanoSuite interface.

Read More »
Micro-Hardness Testers suit quality control applications.
Indenting Machinery

Micro-Hardness Testers suit quality control applications.

Featuring adjustable 7 in. color touchscreen, Wilson® VH1102 and VH1202 offer deadweight loads from 10 g to 2 kg and 9 automatically selectable loading stages. VH1102 is equipped with turret providing 4 positions, including indenter for Knoop or Vickers and 2 standard objectives for 10x and 50x magnification at normal working distance. VH1202 features 6-position turret, including 2...

Read More »
Indenting Machinery

In-Situ Electron Microscopy Tools foster real-time observation.

NanoEx™ holders enable materials scientists and engineers to observe, in real-time, changes at micro, nano, and atomic scale in morphology and dynamic propertiesÂ- of materials under mechanical, electrical, and thermal stimuli as well as environmental conditions mimicking actual use cases. Specific products include NanoEx i/v heating solution, which uses MEMS-based...

Read More »
Indenting Machinery

Agilent Technologies to Demonstrate New PXI Functional Test System at IPC APEX EXPO

SANTA CLARA, Calif.Â- – Agilent Technologies Inc. (NYSE: A) will demonstrate its latest PXI Functional Test System, plus boundary scan and in-circuit test systems, at the IPC APEX EXPO, March 25-27, at the Mandalay Bay Resort and Convention Center (Booth 263) in Las Vegas, Nev. Agilent experts will demonstrate: • The new, cost-effective Agilent TS-8989A, the world's only integrated...

Read More »
Measuring Equipment

Nanomechanical Test Option speeds instrumented indentation.

Designed for Agilent Nano Indenter G200, Express Test option allows 100 indents to be performed at 100 surface sites in 100 seconds. Solution enables Nano Indenter to be operated in controlled-force or controlled-displacement mode. Capable of performing area-function calibration and Young's modulus and hardness evaluations, as well as generating quantitative maps of mechanical properties, system...

Read More »
Indenting Machinery

Agilent Technologies' New Nanoindentation Technique Enables Substrate-Independent Measurements on Thin Film Materials

SANTA CLARA, Calif. -- Agilent Technologies Inc. (NYSE: A) today announced an innovative nanoindentation technique available exclusively on the Agilent Nano Indenter G200 instrumentation platform. The new technique gives researchers the unprecedented ability to make substrate-independent measurements on thin film materials quickly, easily and confidently by means of nanoindentation. It is ideal...

Read More »
Indenting Machinery

Dynamic Contact Module enables nanomechanical testing.

Featuring 30 mN max load capability and 70 Â-µm indenter travel range, DCM II extends range of load-displacement experimentation down to surface contact level. With DCM II option, Nano Indenter G200 and G300 users can study first few nanometers of indentation into surface of material as well as pre-contact mechanics. Module provides displacement resolution of 0.2 picometers and noise levels...

Read More »
Asylum Research's MFP NanoIndenter Wins AVS Product Award
Indenting Machinery

Asylum Research's MFP NanoIndenter Wins AVS Product Award

January 8, 2009 (Santa Barbara, CA): AVS and Asylum Research have announced that Asylum's MFP-3D(TM) NanoIndenter has been selected as one of the top five products exhibited at the AVS International Symposium in October. Asylum's MFP NanoIndenter is a true "instrumented" indenter and is the first AFM-based indenter that does not use cantilevers as part of the indenting mechanism. These...

Read More »
Neagle Choice, LLC Announces New Available Services
Sponsored

Neagle Choice, LLC Announces New Available Services

Neagle Choice has long been known as a quality source for commercial sewing, printing, die cutting, and the manufacturing of a wide range of custom products. Enhancing our service capabilities has been the key to our success, and has driven our growth into many new and exciting markets. Continuing on this trajectory, we now offer precision laser cutting and etching, adding to our long line of manufacturing services. See our video to learn all about it.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers