New G-Force Compensated Inclinometer Communicates Via J1939 and CAN Protocols
Joral’s G-Force Compensated Inclinometer consists of SGAM and DGAM models. The GAM series incline sensors takes input by gyroscope, accelerometer and magnetometer and provide 3-axis output for X, Y and Z as feedback for pitch, yaw and roll. Units meet IP67 standards and are 100% encapsulated. Sensors offer steady feedback during motion and enable user to eliminate complex sensor networks with...
Read More »
TiltSCOUT Wireless Inclinometer features built-in three-axis sensor.
TiltSCOUT Wireless Inclinometer is designed for tank hatch detection and pump jack motion monitoring. Unit detects change in angle of the pump jack when it is operated in pump jack mode. Product is housed in NEMA4X enclosure. TiltSCOUT transfers report information to central gateway which can be connected to control center and the sensor comes with 900 mHz radio and antenna with data...
Read More »
Inclination and Tilt Sensors prevent heavy equipment from tipping.
As IP67-rated inclinometers with integrated RS-232 interface and flying lead cable, MTLT series operates from single 9–32 V supply and utilize MEMS sensors, over temperature calibration, and SmartSensing™ technology. Programmable tilt alarms, also included, can be used to lock out controls or trigger alarm or warning light. Respectively, models MTLT105S and MTLT110S are designed for...
Read More »
Inclinometer helps maximize operator safety.
Constructed with Pyrex borosilicate glass tube assembly and black indicator ball, Lev-o-gage 9 measures angular tilt from -11 to +11°Â- and percent slope from -20 to +20%. At almost 6 in. wide, inclinometer can be read from distance and in low light conditions. Numerals and hashmarks are engraved and hand-filled with acrylic Titanium white paint for optimal visibility.
Read More »
Deploying Commercial Electronics in Rugged Environments
This white paper explores how Commercial Off-the-Shelf components can be used efficiently and cost-effectively in critical military applications.
Read More »
Inclinometer targets sailboats, cruisers, and sport boats.
Designed to measure angular tilt from -30 to +30°, Lev-o-gage 8 provides resolution from -15 to +15°. Unit is designed with shatterproof polymer tube assembly and brass indicator ball. At almost 5 in. wide, inclinometer can be read from distance, even in low light conditions. Numerals and hashmarks are engraved and hand-filled with acrylic Titanium white paint for optimal visibility.
Read More »
High-Visibility Inclinometer improves operator safety.
Able to be read even fromÂ- distance and in low light conditions, Lev-o-gage 7 measures angular tilt from -11° to +11°. Numerals and hashmarks are engraved and hand-filled with acrylic Titanium white paint for visibility and durability. Glass tube assembly is constructed of Pyrex borosilicate, and Saturn yellow color contrasts black indicator ball. Featuring damping fluid that...
Read More »
Industrial Inclinometers utilize MEMS technology.
Providing measurement of slope or tilt angles of object with respect to gravity, T-Series offers dual axis measurement range up to ±60° or single axis measurement of 360°, with 0.01° resolution and 0.1° accuracy. Sensors incorporate built-in linearity and temperature compensation. Available with glass fiber reinforced plastic or AW6082-T6 aluminum alloy housing,...
Read More »
POSITAL-FRABA Inclinometers Are Taken for a Spin
The World's largest ferris wheel, the Las Vegas High Roller, has recently opened to the public with help from POSITAL FRABA's line of TILT-IX 2-Axis ACS inclinometer. A total of 60 inclinometers are distributed around the outer diameter of the wheel, ensuring a level ride for each passenger pod as the wheel rotates. The devices, which function as highly accurate versions of the accelerometers...
Read More »
Center Punch measures angles and marks pipes.
Featuring digital inclinometer gauge set on angled base, Sumner Center Punch is designed for measuring angles on pipe. Gauge displays angles to nearest hundredth, is removable from magnetic base, and includes zero button. Once desired angle is reached, pushbutton spring-loaded striking hammer clearly marks pipe at desired locale.
Read More »BEI Sensors to Exhibit at CONEXPO-CON/AGG 2014
Goleta, CA – BEI Sensors is proud to announce its return as an exhibitor at the CONEXPO-CON/AGG show taking place in Las Vegas, Nevada from March 4 through March 8. As an innovator of position sensing products for the Off-Highway Market, BEI Sensors will have exciting products on display.Â- The enhanced 9960 rotary non-contacting sensor provides extreme versatility and performance with...
Read More »
Standex Engraving Mold-Tech Offers Nickel Shell Capabilities on a Global Scale
Standex Engraving Mold-Tech is the premier, global supplier for mold texturing and surface finishing. With a full range of services, Standex Engraving Mold-Tech is also the only nickel shell supplier producing in three global locations. See our video to learn more.
Read More »
