Impellers

https://continentalfan.com/e-catalog/cabinet-cooling-fans/mnc-mixed-flow-cabinet-cooling-fans/ incorporates adjustable blade geometry.
Impellers

https://continentalfan.com/e-catalog/cabinet-cooling-fans/mnc-mixed-flow-cabinet-cooling-fans/ incorporates adjustable blade geometry.

MF Mixed Flow Impeller provides non-stall airflow properties and non-overloading power curves. It delivers greater airflow than centrifugal fans and more pressure than axial fans. Available in diameters from 315-1,000 mm, product can be used for OEM applications such as electronic cooling or to provide general ventilation for industry and office buildings.

Read More »
Impeller has computer aided design for optimal aerodynamics.
Impellers

Impeller has computer aided design for optimal aerodynamics.

Injection molded from GRP polyamide, TEK Impeller incorporates compound curves and varying thickness. It is available in CW, CCW, and DWDI with matching inlet cones and has airfoil (BCA) design. Stronger than steel, but weighing less than Â-½ as much, unit offers non-overloading power characteristics and comes in 9 sizes from 7-18 in. dia.

Read More »
Motorized Impeller suits limited-space applications.
Impellers

Motorized Impeller suits limited-space applications.

TMK Motorized Impeller consists of one precision-balanced, air-moving package with compact design. Coupling of motor and impeller minimizes space requirements and provides for vibration-free operation. Unit combines TEK backward curved airfoil wheel with external rotor motor. Suited for supply or exhaust applications, unit is speed controllable. Available in 1- or 3-phase voltages, product is...

Read More »
Impeller comes in cast version.
Impellers

Impeller comes in cast version.

Model SC-3 Impeller produces flow characteristics of larger impellers, without added weight or resulting loss in pumping efficiency. Cast version is suited for smaller impellers and is available on Model DT top-entering mixers. Rubber covering and coatings are available for corrosive applications.

Read More »
Impeller is suited for top-entering mixing applications.
Impellers

Impeller is suited for top-entering mixing applications.

Chemineer® SC-3 Impeller, available for use on DT Top-Entering Mixers, features one-piece or bolted blade design and is constructed of carbon steel or 316 stainless steel. Rubber covering and coatings are available for corrosive applications. Flat velocity profile allows for blending and solids suspension. Its weight allows for use of longer shaft extensions for deeper tanks and resolves...

Read More »
Impeller is engineered for deep tank applications.
Impellers

Impeller is engineered for deep tank applications.

Suited for deep tank mixing, SC-3 is offered in one-piece or bolted, 3-blade designs, dependant upon minimum opening requirements. It has flat velocity profile that allows for blending and solids suspension and is constructed from carbon steel or 316 stainless steel. Rubber covering and coatings are also available for corrosive applications. Product allows use with longer shaft extensions for...

Read More »
Mixer Impeller suits shear-thinning fluid applications.
Impellers

Mixer Impeller suits shear-thinning fluid applications.

CF Counter Flow Mixer Impeller promotes strong up and down pumping action, while helping to control Weissenberg (shaft climbing) effect of fluid being blended. Mixed axial and radial flow allow it to operate at high impeller to tank ratios. Impeller is suitable for high viscosity polymer blending applications.

Read More »
Impeller prevents entrapment of process media.
Impellers

Impeller prevents entrapment of process media.

Smoothline upper impeller, for turbine agitators, has FDA-approved Teflon® gaskets between every joint. Polished surface finishes are available to roughness values as fine as 4-7 Â-µin. RA. Compatible with single-piece shafts, applications include food, beverage, and pharmaceutical industries where cleanliness/sterilization between batches is required. Company's HE-3, P-4, S-4, and...

Read More »
Axial Impeller utilizes airfoil blade technology.
Impellers

Axial Impeller utilizes airfoil blade technology.

Elta Range 1400 Impeller is offered in diameters between 24 and 55 in. Two hubs accommodate 2, 3, 4, 6, 9, or 12 blades. Blades are available in aluminum or GRP and feature adjustable pitch fixing arrangement. Fan selection program and various bore sizes are available. Applications include general ventilation, cooling towers, heat exchangers, bulk drying, tunnel ventilation, and process cooling.

Read More »
Impeller features bolted construction.
Mixers (Fluid Blending)

Impeller features bolted construction.

Maxflo W, designed for gas/solid mixing, utilizes hydrofoil technology for maximum pumping action with minimum energy loss. Bolted blades facilitate disassembly during routine maintenance. Construction materials include carbon steel, stainless steel, and assortment of high-strength alloys. Various coatings are available for maximum protection in harsh service environments.

Read More »
Sponsored

Simple Connection MGB with EtherNet/IP

The new MGB with EtherNet/IP is a leap forward in access door safety. Designed for easy installation, flawless performance, and long service life, it is engineered with robust features and cutting-edge technology that places it firmly at the leading edge of the door safety device industry. To learn all about the benefits of the Euchner MGB, see our video.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers