Impeller / Propeller / Turbine - Agitators / Mixers

Continuous Rotary Mixer features 316 SS sanitary design.
Impeller / Propeller / Turbine - Agitators / Mixers

Continuous Rotary Mixer features 316 SS sanitary design.

Designed to blend ingredients in ratios as extreme as 1 ppm with 100% uniformity, Model 16-4SS features capacity range of 85 cu-ft/hr at 1 min residence time to 42 cu-ft/hr at 2 min residence time. Slowly rotating 16 in. x 4 ft cylinder contains mixing flights that impart forward- and reverse-pitch, back flow mixing action that distributes bulk ingredients thoroughly and gently. Drum angle can be...

Read More »
High Shear Mixer targets process industries.
Impeller / Propeller / Turbine - Agitators / Mixers

High Shear Mixer targets process industries.

Incorporating rotor/stator configuration to promote dual flow through Delta rotor/stator, PM Model offers 15-30 minutes typical cycle times. Designed as batch mixer, it is mounted on conventional air/oil hydraulic lift system, and offers rapid incorporation of powders. Several models are available from 5-200 hp. Intended for use in agglomerate reduction and production of fine emulsions, unit...

Read More »
Impeller / Propeller / Turbine - Agitators / Mixers

Planetary Mixer handles high-viscoity paste materials.

Featuring 316 stainless steel construction and polished to 150 grit finish, Single Planetary Mixer is available in wide range of sizes from 1-300 gallon capacity. Unit is equipped with custom helical mixing blade as well as air/oil hydraulic lift to raise and lower agitator from mix vessel. Providing dust tight operation with numerous charge and sight ports, mixer includes NEMA 4 control panel...

Read More »
Peristaltic Pump Vs. i-FILL® Technology
Sponsored

Peristaltic Pump Vs. i-FILL® Technology

Intellitech's advanced i-FILL® pumps are used by companies working in some of the world's most demanding sectors, delivering innovative, highly accurate and repeatable results, ensuring ultimate reliability and ease of use for all of our clients.

Read More »
Single Planetary Mixer handles high-viscosity materials.
Impeller / Propeller / Turbine - Agitators / Mixers

Single Planetary Mixer handles high-viscosity materials.

Featuring stainless steel type 316 construction polished to 150 grit finish, single planetary mixer is equipped with custom helical mixing blade that allows mixing of high-viscosity paste materials. Unit incorporates multiple charge and sight ports and is built for dust-tight operation. In addition to NEMA 4 control panel purged for Cl1 Div 1 hazardous areas, features include air/oil hydraulic...

Read More »
Top-Entering Agitators offer modular design package.
Impeller / Propeller / Turbine - Agitators / Mixers

Top-Entering Agitators offer modular design package.

Model 20 HT/GT agitators include high-efficiency cast gearbox with heavy-duty output shaft and bearings as well as standard cast dry well seal that eliminates lubrication oil leakage from gearbox. Devices are designed to meet AGMA, OSHA, ANSI, IEC, DIN, EU, and ATEX standards and requirements. Also featuring reversible rotation, they are available in right angle and parallel shaft configurations,...

Read More »
Impeller / Propeller / Turbine - Agitators / Mixers

Miniature Rotary Batch Mixer has 5 ft³/500 lb capacity.

Model MX-5-SS blends ingredients in ratios as extreme as 1 ppm with 100% uniformity in less than 3 min, regardless of disparities in bulk densities, particle sizes, or flow characteristics of batch components. Rotating drum with proprietary mixing flights gently tumbles, turns, and folds material. For complete evacuation with no residual material, rotating vessel and internal flights lift and...

Read More »
High Shear Mixer features inline design.
Impeller / Propeller / Turbine - Agitators / Mixers

High Shear Mixer features inline design.

Suited for use in laboratory and pilot plant development efforts, Model 400DL consists of 1-3/8 in. dia rotor which is driven by 1 hp motor at speeds up to 10,000 rpm. Mixer is offered with attached 2.5 gal mix vessel and range of stator heads including slotted, round hole, fine screen, and Quad (4-stage) designs. All wetted surfaces are constructed in 316 stainless steel and special seals are...

Read More »
Multi-Stage Static Mixer utilizes sequential operation.
Impeller / Propeller / Turbine - Agitators / Mixers

Multi-Stage Static Mixer utilizes sequential operation.

Model 2850 In-Series Chemical Mixer includes 2 or more fixed plates, each featuring orifices with pattern that mixes by combination of alternate vortex shedding and intense shear zone turbulence. Designed to mix multiple fluids, modular in-line mixer can be equipped with any type of flange and provides COV.008 mixing quality. Product comes in -½-60 in. pipeline sizes and can be made of materials...

Read More »

All Topics