HVAC

HVAC, Sensors Monitors & Transducers, Test & Measuring Instruments

Temperature Assemblies provide surface measurements.

Dec 11, 2001

WORM Flexible Sensor coupled with PC-Programmable or Smart HART® Temperature Transmitters mounts directly to tanks, pipes, motors, compressors, or reactors when surface temperature measurement is needed. Spring-loaded, flexible sensor trims-to-length for easy installation. Stainless steel mounting accessories allow assemblies to endure harsh field environments. Read More

Electrical Equipment & Systems, HVAC, Sensors Monitors & Transducers

Active Flow Switch works in pipes up to 4 ft dia.

Dec 07, 2001

FS30 flow switch works with any of company's flow sensors to send output at set flow rate. It can be inserted in pipe sizes 1/2 to 48 in., mounted on sensor or remotely, and set to activate on rise or fall. Set point is input using rotary digital switches. Switch has variable hysteresis or deadband setting to accommodate varying amounts of turbulence. If turbulence is significant, deadband keeps... Read More

Chemicals & Chemical Processing, HVAC

Pleated Filter meets ASHRAE 52.2 Standard.

Nov 30, 2001

Type DP8 pleated panel filter has media made from 100% synthetic fibers enhanced with electrostatic charge to increase efficiency on particles sized one micron and below. It meets MERV8 rating per ASHRAE Standard 52.2 and provides 30-35% dust spot efficiency per ASHRAE Standard 52.1. Media is pleated with galvanized steel expanded metal backing to form consistently shaped pleats and prevent rust.... Read More

HVAC

Underfloor Fan installs between raised floor pedestals.

Nov 28, 2001

Energy efficient Model UFT variable speed fan accommodates varying heating and cooling loads in perimeter zone and interior rooms. It delivers up to 1798 cfm. Units are available with hot water or electric reheat coils to offset cold downdrafts at exterior of building. For interior rooms, where only cooling is required, units without reheat coils may be specified. Read More

HVAC

Filter Vent is designed for dry bulk material bins.

Nov 20, 2001

Fast Filter Bin Vent is made of carbon steel, with solenoids pre-wired and plumbed. It has smart timer, DP transmitter and digital readout. Vents are available from 400-2200 CFM with 79 to 430 sq ft of filter media. Vents are shipped complete with galvanized cages, bag cups, venturis, and 16 oz. polyester (dacron) bags. Read More

HVAC

Brushless DC Blower cools compact electronics.

Nov 17, 2001

Measuring 5.30 in. square by 1.35 in. deep, Airbox DC Blower delivers 30 cfm and static pressure of 0.7 in. of water, while generating minimal noise of 46.6 dB. ThermaPro-V(TM) technology automatically adjusts airflow based on temperature needs. Automatic restart feature ensures operation will resume after power failure or overheating. Both housing and polypropylene impeller meet UL 94V-0... Read More

HVAC

Coolants are designed for grinding applications.

Nov 16, 2001

Microcool(TM) functional fluids, available in wide selection of viscosity ranges, are suitable for grinding operations that shape, sharpen and resharpen carbide, tool steel and stainless steel tools. Fluids work with or without chilling device and are compatible with diamond, CBN or vitrified wheels. They have a great tolerance for contamination, even after extended use. Read More

HVAC, Sensors Monitors & Transducers, Test & Measuring Instruments

System provides non-contact temperature measurement.

Nov 16, 2001

Series IM/IMS combines IM Panel Meter with IMS IR Sensor to form complete monitoring system. IM 1/8 DIN panel meter displays temperature from 0 to 1000°F (-18 to 538°C) on 4-digit LED. It provides user-defined 4-20 mA or thermocouple output as well as adjustable dual setpoints and deadband alarm outputs. Infrared Sensors are available with distance-to-target ratio (35:1) or close focus... Read More

HVAC

Steel Cooler keeps lube oil cool.

Nov 15, 2001

SX2000 is a compact, thermally efficient unit made of carbon steel with copper tubes. Several other tubing materials are available. Cast-iron bonnets, available in single, 2, and 4-pass configurations, are kept in stock, as are cores. Unit is suitable for lube oil cooling and other process-cooling applications, and is dimensionally interchangeable with similar models. Read More

HVAC

Fume System collects all types of dust.

Nov 15, 2001

Mobile FCS provides up to 99.5% clean air for environments which involve brazing, dry chemicals, machining, laser and plasma cutting, sanding, powders, soldering and welding. It handles carbon, plastic and rubber dust as well as fugitive emissions. Unit has automatic jet pulse system with 5-gal recovery tray, extraction arm that extends to more than 9 ft, and hood with damper and halogen light.... Read More

HVAC

Cartridge Collectors handle variety of applications.

Nov 15, 2001

Cartridge-type dust collectors are available in large range of machine sizes. Each uses on-line, compressed-air pulse cleaning system with venturis, diaphragm valves and electronically controlled solenoid valves. Fabric filter dust collector uses high inlet with down-flow to force dust-laden air toward hopper, allowing heavier dust to drop out before reaching filter bags. This permits higher air... Read More

Fluid & Gas Flow Equipment, HVAC, Material Handling & Storage

Compressed Air Filters remove oil, mists, vapors and smells.

Nov 15, 2001

D Series includes Type CF high-efficiency coalescing filter that removes oil and aerosols; Type CC general purpose unit, suitable as prefilter for high efficiency filters; Type PF, which takes out fine particulate matter; and Type VF, which removes hydrocarbon vapors and their associated odors and tastes. Each has carousel color-indicating differential pressure gauge, easy element change-out and... Read More

HVAC, Thermal & Heating Equipment

Hot Room heats totes.

Nov 14, 2001

Sahara 6-tote Hot Room can heat up to 6 totes; each tote has one 4 in. port hole for hose. It us suitable for pumping from totes, and its smaller access doors provide access to make connections to pumps without having to open larger doors. Steam or electrically heated, Hot Room features spill containment capacity, temperature control and stainless steel or carbon steel construction. Read More

HVAC, Sensors Monitors & Transducers

Sensors measure micro liquid flow rates.

Nov 08, 2001

Rated for operation up to 500 psig, Series 102 liquid flow sensors measure flow rates from 13 mL/min to 10 L/min (2.6 GPM) with ± 3% full scale accuracy and ±0.2% repeatability. Sensors provide linear 0-5 VDC output signal and have turndown ratio up to 10:1. Series 102T has dual output signals consisting of 0-5 VDC linear and buffered 7.5 V pulse output proportional to flow rate. Read More

HVAC, Test & Measuring Instruments

Temperature Sensors feature lead-wire connections.

Nov 08, 2001

Bolt-On RTD Temperature Sensors are available in 4 models with through-holes and 2 models with threaded bolt designs. Platinum and nickel RTD elements are available to match existing instruments, with temperature ranges up to 550° C. Models with 100 ohm at 0° C platinum (0.00375 TCR) elements and 100 ohm at 0° C nickel elements are also available. Two-wire construction allows use with 4... Read More

Fluid & Gas Flow Equipment, HVAC

Isolation Systems protect against airborne contaminants.

Nov 08, 2001

AirShelter(TM) Isolation Systems use HEPA-filtered air to create contained, positive-pressure environments. Their main component is American Air Filter's AstroCel® II HEPA filter. The combination of positive pressure ventilation(PPV) and HEPA filtration provides filtration levels greater than 99.97% on 1 to 5 micron particles. AirShelter line includes ceiling and floor-mounted HEPA filtration... Read More