HVAC

Fluid & Gas Flow Equipment, HVAC

.01 Micron Superstar Filter

Nov 18, 2016

The .01 Micron SuperStar Filter is designed to provide clean, dry, compressed air resulting in the removal of any vapors and contaminates down to .01 micron.

According to Walmec North America, the .01 Micron SuperStar Filter is a four stage filtration system that has a .01 micron rating, with flow ranges of 50 SCFM, 75 SCFM, or 100 SCFM, and can handle pressure ratings of up to 250 PSI.... Read More

HVAC

Waterborne Breathable Air Combo System From Martech Services Company

Nov 18, 2016

As the use of waterborne paints becomes more popular and in some areas, required, the need for clean and dry compressed sprayable air is a critical component. The need for the proper filtration to remove moisture, oil vapors, gaseous hydrocarbons, dirt, rust, scale, and other potentially dangerous contaminants is the minimum at best. Then if the dew point and relative humidity can be... Read More

HVAC

RMD Axial Exhaust Fan

Nov 18, 2016

Continental Fan’s RMD Axial Exhaust Fans are suitable for roof or wall mounting, and are the perfect low cost choice for areas that have little or no ductwork. RMD fans are easy to install, and feature a totally enclosed ball bearing motor. RMD fans are available in diameters from 10” through 18”, with direct drive capacities ranging to 2,400 cfm.

FEATURES & BENEFITS

•... Read More

Fluid & Gas Flow Equipment, HVAC

Fresh Air Intake

Nov 18, 2016

The Fresh Air Intake System, from ALAN Mfg. dilutes stale air by adding fresh outdoor air into the building. Outside fresh air enters the system through the fresh air intake and is pulled through the system through a duct connected to the return plenum. The system also creates positive pressure preventing irritants and other pollutants from entering the building. The VCS control panel... Read More

HVAC

Gas Compressor CHC 1050 can maintain optimum hydraulic oil temperatures.

Nov 17, 2016

Using automatic dampers and warm up valve, Gas Compressor CHC 1050 maintains high oil temperatures. Product's design eliminates pneumatic control valves and liquid separation along with handling equipment of a Hydraulic Casing Gas compressor. Unit can processes unlimited amounts of liquids.

Read More

HVAC

Champion® LX Series 16 SEER package equipment line includes all ENERGY STAR® qualified systems

Nov 16, 2016

MILWAUKEE (Nov. 14, 2016) - Johnson Controls announces its expanded line of Champion® LX Series residential packaged equipment now offers high-efficiency 16 SEER PHE6 and PCE6 models. All models in the 16 SEER line are now ENERGY STAR® certified. Available in 2- to 5-ton capacities, these units feature a contractor-friendly design, easy installation and service, reliable technology and... Read More

HVAC

Envision2 NXW Reversible Chiller features 10-inch color touchscreen display.

Nov 16, 2016

Equipped with Wi-Fi router, factory-installed pressure gauges and temperature sensor wells, Envision2 NXW chiller is available in 10- to 50-ton capacities. Suitable for a wide range of applications, including pools, radiant floor heating, and ice melt, chiller also provides precisely heated or cooled water for fan coils or other applications. Designed to fit through most doors, NXW includes... Read More

HVAC

RightDry™ Technology Now Available Option with Munters Integrated Custom Air Handler (ICA) System

Nov 14, 2016

RightDry™ allows customers to select higher efficiency dehumidifier with low-temperature reactivation sources

Amesbury, Mass. - Nov. 11 - Munters state-of-the-art Integrated Customer Air Handler (ICA) can now be equipped with RightDry™ technology to allow customers to select a higher efficiency dehumidifier with low-temperature reactivation sources. With the ability to integrate a... Read More

HVAC, Machinery & Machining Tools, Printing & Duplicating Equipment, Thermal & Heating Equipment

16 SEER PHE6 and PCE6 models feature vibration-reducing chassis

Nov 14, 2016

Available in 2- to 5-ton capacities, 16 SEER PHE6 and PCE6 models feature contractor-friendly design. Providing two-stage compressor and two-stage gas/electric heating, unit offers exact-fit gas/electric hookups and compact cabinet to fit most roof frames or slabs. With removable front and side panels, device offers separate access for refrigeration and heat compartments. 16 SEER models... Read More

Chemicals & Chemical Processing, Fluid & Gas Flow Equipment, HVAC

Ion Air Jet offers easy installation using 1/8 NPT male inlet.

Nov 14, 2016

Using small amount of compressed air to entrain 80 percent of the total output airflow from the surrounding room air, Ion Air Jet minimizes compressed air use and maximizes ionized airflow. With positive and negative ions capable of neutralizing high static charges, unit’s electrically energized emitter at the discharge end fills the entire airstream. Available with permanent mount or... Read More

HVAC

Tube & Pipe Coolant Technology Suitable for Multiple Operations and Substrates

Nov 13, 2016

Quaker Chemical expands QUAKERCOOL® 700 Series at FABTECH 2016

CONSHOHOCKEN, Pa., Nov. 8, 2016 - In the Tube & Pipe industry, it is not unusual for a manufacturer to use multiple coolants for different operations, increasing the risk of incompatibility issues within the process or with downstream protective coatings.

Quaker Chemical Corporation (NYSE: KWR, "Quaker"), a leading... Read More

HVAC

Hybricool Coolers housed in tough enclosures of GRP.

Nov 13, 2016

Offering rating of IP65, Hybricool Coolers work in harshest of environmental conditions. Used in protecting remote and mission-critical control and instrumentation equipment, Hybricool operates using compressor, condenser, throttle and evaporator providing high degree of failsafe redundancy. Both active and passive cooling system are involved in making cooler water round the clock. GRP... Read More

HVAC

JARO’s Virtually Silent Fan provides static pressure.

Nov 11, 2016

Measuring in 40 x 40 x 20 mm, Virtually Silent Fan provides 3200 ± 20% RPM. Featured with Dynamic Fluid Bearing system, unit provides static pressure of 1.200 mmH2O and soundless operation at 11.7 dB. Unit is suitable for set-top boxes, kitchen appliances and acoustically-sensitive medical equipment where noiseless operaton is needed.

Read More

HVAC, Thermal & Heating Equipment

XEU1 Series Heaters features corrosion resistant GA steel cabinet.

Nov 11, 2016

Designed for rugged industrial applications, XEU1 3 kW Heaters meet both CSA and UL Certification Standards. Unit provides high quality immersion heater, with fan and motor assembly and is offered with large control enclosure with extra port for wiring with external thermostat. XEU1 Heaters minimize moisture ingress with help of o-ring enclosure.

Read More

HVAC

Pennsylvania Country Club Gets Guest House In Order With New High Efficiency Boilers

Nov 09, 2016

Weil-McLain Evergreen Boilers Key to Heating Overhaul

Providing guests with an enjoyable and comfortable stay is of utmost importance to staff at the Saucon Valley Country Club in Bethlehem, Penn. Utilizing Weil-McLain® boilers to upgrade the heating system at the club’s Weyhill Guest House helped meet that mantra and ensure that continued “home away from home” experience for... Read More

HVAC

New ENERGY STAR® Certified 16 SEER Systems Broaden Luxaire® LX Series Package Equipment Line

Nov 09, 2016

MILWAUKEE (Nov. 2, 2016) - Johnson Controls adds new high-efficiency 16 SEER PHE6 and PCE6 models to its line of Luxaire® LX Series residential packaged equipment. All models in the 16 SEER line are now ENERGY STAR® certified. Available in 2- to 5-ton capacities, these units feature a contractor-friendly design, easy installation and service, reliable technology and Johnson Controls’... Read More

HVAC

CFM series Dc Fan Line offers pressure values of 2.79 to 19.8 mm H2O.

Nov 09, 2016

Available with rated voltages of 5, 12, 24 and 48 Vdc, CFM series dc fan line features Rohs compliant models with dual ball bearing construction for maximum reliability. Carrying UL/cUL 507 and TUV (EN 60950-1) safety approvals, unit comes in frame sizes of 40, 50, 60, 70, 80, 92 and 120 mm. Delivering airflow of 10 CFM and 200 CFM in the 40 mm and 120 mm series respectively, device is ideal... Read More

Fluid & Gas Flow Equipment, HVAC, Material Handling & Storage, Materials & Material Processing

DBS Screw Blowers monitors all on board sensors.

Nov 09, 2016

With an Ethernet port and built-in Web-server, Sigma Control 2 enables remote monitoring and email notifications for service and alarms. Providing communication interfaces such as ModBus, Profibus, Profinet, and Devicenet, unit provides seamless integration into plant control/monitoring systems such as Kaeser's Sigma Air Manager 4.0. Available with motor sizes from 20 to 50 hp and flows... Read More

HVAC

DataSox Air Dispersion System features adjustable air displacement system.

Nov 08, 2016

Designed with Stat-X, Custom Porosity Fabric, DataSox Air Dispersion System provides the flexibility of directional spot cooling capabilities along with adjustable nozzles for high wattage servers. Air distribution of the device is energy-efficient 1/4 to 1/2-in. w.g. of static pressure resulting in cold aisle of 3°F to 5°F, with up to 40-percent less CRAC flow rate. Available in dimensions... Read More

HVAC

LG's 5-Ton Heat Recovery Unit offers automatic heat and cool mode changeover.

Nov 08, 2016

Including 2-ton heat pump and 5-ton heat recovery model, heat recovery system provides versatility of simultaneous heating and cooling, even in most extreme weather. Utilizing single phase power, recovery system allows independent control of room temperatures for 12 zones. Offering scroll compressor with an increased range of operating speed, device is compatible with LG's full line of... Read More