Latest I/O Hub from Balluff is Offered in IP67-Protection-Rated Metal Housing
Electronic Hubs

Latest I/O Hub from Balluff is Offered in IP67-Protection-Rated Metal Housing

The I/O Hub enables IO-Link master to host up to 248 discrete sensors on single network node. The hub features 8-channel and 16-channel design and eliminates the need for network nodes and splitters. The unit offers 300mA output per channel with maximum of 1.6A per I/O hub. The hub allows user to configure input or output and provides short circuit and overload protection per port. It can be used...

Read More »
BKG® HiCut™ Cutter Hub Now Accommodates both Angled and Straight Blades
Mechanical Hubs

BKG® HiCut™ Cutter Hub Now Accommodates both Angled and Straight Blades

BKG® HiCut™ Cutter Hub is designed for BKG® underwater pelletizers which increase the working life and lifespan. The new hub design increased the number of blades by form factor of 50%, throughput and reduction in pelletizer RPM. The hub features round edges and smooth surfaces with countersunk screws, which reduces swirling and optimizes the flow. HiCut™ Cutter Hub improves lifespan of the...

Read More »
MILTECH™ 300 HoB Now Allows Connectivity Between USB-Connected Devices
Hubs

MILTECH™ 300 HoB Now Allows Connectivity Between USB-Connected Devices

MILTECH™ 300 HoB features five USB 3.1 ports, one gigabit Ethernet port and IO port. Unit can be used for power and charge USB devices with a power of 5 VDC per port and accepts 12-28VDC and up to 2A downstream power. The HoB comes in 73 mm x 38 mm x 11 mm dimension with a weight of less than 24.2 g and is conformally coated to withstand debris and vibration.

Read More »
BNI00CL I/O Hub features electrically isolated output power bus.
Modules

BNI00CL I/O Hub features electrically isolated output power bus.

Balluff’s BNI00CL I/O Module is designed for applications where safe interruption of output is required. This unit provides up to 8 inputs and 8 outputs. Module meets TÜV, EN 61508 and ISO 13849 standards and each output offers up to 2A of power at 24V DC with maximum capacity of 9 A for the I/O block. Unit simplifies diagnostics during event and ensures output circuits are safely de-energized.

Read More »
Slim IO-Link Master meets IP67protection standards.
Electronic Components

Slim IO-Link Master meets IP67protection standards.

Slim IO-Link Master is enhanced with Type A or Type B port functionality and is available in EtherNet/IP, PROFINET and EtherCAT industrial networks. The Type A model can host up to 124 configurable I/O points and 4 additional I/O whereas the Type B model used for connecting IO-link valve manifolds. Having 2 A of output current per channel, units come with built0in switch for daisy chaining and...

Read More »
IO-Link Analog Hub comes with fully configurable inputs.
Hubs

IO-Link Analog Hub comes with fully configurable inputs.

Eliminating long shielded-cables and analog cards, IO-Link Analog Hub enables user to assign software-based set-points per channel. Unit’s analog-to-digital conversion resolution can be configured as 10-, 12-, 14- or 16-bits per channel. Offering a unified interface for device-level connectivity, the hub is configurable to inputs such as voltage, current, or temperature measurements and can...

Read More »
UTC040C MicroTCA Carrier Hub comes with BaseT interface.
Hubs

UTC040C MicroTCA Carrier Hub comes with BaseT interface.

Consisting of PCIe Gen3 switch with 1024Gbps aggregate bandwidth, automatic speed negotiation, and virtual switch, UTC040C Conduction Cooled MicroTCA Carrier Hub is used for configuring JTAG Slave devices on AMC cards. Suitable for SWAP-constrained applications, hub allows for remote debugging without additional JTAG equipment. Unit comes with two/three GbE switch with 12 ports 10/100/1000-BaseT...

Read More »
MILTECH USB Hub meets MIL-STD-810F standards.
Electronic Hubs

MILTECH USB Hub meets MIL-STD-810F standards.

Providing connectivity and communication between multiple USB devices in soldier carry and harsh commercial environments, MILTECH 303 USB Hub offers six USB 3.1 ports and optional single gigabit Ethernet port. Using 12-28VDC with up to 2A downstream power per port, unit supports DCP, CDP and SDP battery charging profiles. Product measures 82.2 mm x 64.1 mm x 26 mm size with less than 140 g weight.

Read More »

All Topics