Hose Clamps

Heater Bands are CSA and UL recognized.
Hose Clamps

Heater Bands are CSA and UL recognized.

Designed for plastics processing machines, Hot Sleeves Replacement Heater Bands feature rust resistant steel sheath, stainless steel strap lock-up, mica insulation, and nickel-chromium resistance wire element. They incorporate 12 in. treated glass braid leads at end of band and deliver average 31-46 W/in.Â-² to ensure consistent operation. Notched sleeve allows insulation to be flush with...

Read More »
Connector Clamps offer various metric bore combinations.
Hose Clamps

Connector Clamps offer various metric bore combinations.

Two-Way Connector Clamps are available in aluminum with matte shot-blasted finish or black powder coat finish, as well as in stainless steel. Bores of flanged clamps are machined and designed for construction tubings GN 990 or DIN 2391, DIN 2395, and DIN 2462. Hexagon nuts are either zinc plated or stainless steel to suit screws. Clamps may be ordered with socket cap screws, hex cap screws, or...

Read More »
Hose Clamps

Flanged Connector Clamps come in metric bore combinations.

Bores of Flanged Connector Clamps are machined and designed for construction tubings GN 990 or DIN 2391, DIN 2395, and DIN 2462. They are made of stainless steel, or aluminum with matte shot-blasted finish or black powder coat finish. Hexagon nuts are available either zinc-plated or in stainless steel to suit screws. Clamps may be ordered with socket cap screws, hex cap screws, or adjustable...

Read More »
Clamps feature EPDM extrusion cushioning.
Hose Clamps

Clamps feature EPDM extrusion cushioning.

Cushion clamps series COL and CDL are available in hot-dipped galvanized steel, chemically treated G-90, or Type 304 annealed SS. Units are designed to secure and route wire, cable, tubing, and hoses. COL series offers contoured configuration clamping diameter, offset lower leg, and can secure one tube. CDL series can secure multiple tubes. Clamps are suited for agricultural, automotive, marine,...

Read More »
Hose Clamps

Hose Clamps can be used in place of T-Bolt clamps.

Helping to extend hose life, ABA Ultra(TM) heavy-duty hose clamps feature non-perforated band with rolled edges that moves smoothly around hose without cutting into it. Entire clamp, which consists of band, screw, and housing, is made of AISI 316 stainless steel to withstand harsh environments. Fine thread pitch optimizes clamping force generated per screw turn.

Read More »
Direct Burial Ground Clamp delivers 4-clamp functionality.
Hose Clamps

Direct Burial Ground Clamp delivers 4-clamp functionality.

Bronze-alloy ERITECH® EK16 and EK17 have bronze screws and consolidate rebar, ground rod, water pipe, and direct-burial water pipe clamps in one tool. Along with mechanical splicing ability, product can be pre-set on rebar or water pipe and has lay-in feature that secures wire by tightened setscrew. Models EK16 and EK17 install wire in parallel and perpendicular positions, respectively....

Read More »
Hose Clamps have 1-piece design.
Hose Clamps

Hose Clamps have 1-piece design.

Constant Tension Light Band self-compensating hose clamps are manufactured using austempering method, a heat treating process that ensures strength and eliminates brittleness. With single piece construction that provides leakproof connections, clamps are suited for applications in small engines, agricultural & utility vehicles, automotive systems, and appliances.

Read More »
Tube Clamps and Linear Actuators work in modular systems.
Hose Clamps

Tube Clamps and Linear Actuators work in modular systems.

Metric Tube Clamp Connector Components are used to construct fixtures, machine guard units, equipment bases, and operating systems using standard round and square tubing. They are offered as one-piece split or multi-part tube clamp connectors made of aluminum with various finish options. Manually Driven Linear Actuators consist of guide tube, threaded internal spindle, and follower nut. They are...

Read More »
Hose Clamps

Hose Clamps cannot be over or under tightened.

Self-Compensating Hose Clamps expand and contract with hose in response to temperature changes in application. Installed and removed using manual or pneumatic tools, clamps are suited for low-pressure applications in single-wire, double-wire, and constant tension band configurations. They also offer alternative to gluing hoses to manifolds, providing effective clamping without messy glues that...

Read More »
Expandable Heater Bands facilitate barrel band replacement.
Hose Clamps

Expandable Heater Bands facilitate barrel band replacement.

HTFlex Bands(TM) replace hard-to-remove, one-piece and two-piece barrel bands. They fit 4-10 in. diameter barrels and come in widths from 1Â-¼-4 in. in ¼ in. increments. Units support operating temperatures up to 1,400°F and watt densities to 90 W/in². Engineered to expand and slide over barrel diameter, bands can be installed and removed from any point on barrel...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers