Hose Clamps

Get Even More Ideal-Tridon-® Clamps in 5 Days or Less
Hose Clamps

Get Even More Ideal-Tridon-® Clamps in 5 Days or Less

Smyrna, Tennessee – Ideal Clamp Products, Inc. continues to strive to be the best in the industry.Â-  We are excited to announce that in addition to over 2,900 parts that are already available in 5 days or less, we are now shipping nine additional series in 5 days or less. Products Included... • 56 & 58 Series Snaplock Quick Release Clamps • 30010 & 30020 Series T-Bolt Clamps • 37215...

Read More »
Tube Clamps aid assembly and seating during manufacture.
Hose Clamps

Tube Clamps aid assembly and seating during manufacture.

Offered inÂ- 3 sizes, Welker tube clamps provideÂ- narrow back-up and clamp for holding pipe and tubing. Dual hardened fingers, when actuated,Â- center and securely grip tube against v-block. Located beneath v-block, interchangeable spacerÂ- allows multiple diameter tubes to be used in same fixture within clamp size range. Compact cylinder, included, features multiple port...

Read More »
Hose Clamps

Extended Nose Clamps combine usability and gripping power.

Comprising two 3-ton, self-tightening, spring-loaded clamps, CL Series helps auto body techs grip hard to reach spots or those located in confined areas. Extended nose promotes reach, cross-hatch teeth design lends to gripping power, and swiveling pull ring minimizes chain twist. While both 8 in. long models have 1Â-¼ in. wide x 27/32 in. deep gripping surface with min throat clearance of...

Read More »
Worm Gear Clamps are manufactured in SAE sizes 4-36.
Hose Clamps

Worm Gear Clamps are manufactured in SAE sizes 4-36.

Featuring max torque rating is 20 lb-in., Micro Series worm gear clamps are manufactured with 300 series stainless steel housings and bands that are 5/16 in. wide. This promotes optimal performance in tight areas as well as small diameter hoses and air/fuel lines. Conforming to SAE J 1508 standards, products may be specified as Series 90037 for zinc-plated worms or Series 90038 for stainless...

Read More »
AME Introduces Clamping Products from Jakob Antriebstechnik
Hose Clamps

AME Introduces Clamping Products from Jakob Antriebstechnik

Advanced Machine & Engineering Co. (AME) is introducing several new workholding clamping products from Jakob Antriebstechnik, the company's European partner. The series MC power clamping nut offers simple manual operation, high clamping forces through force magnification and high operating safety, as a result of a self-locking feature. The clamping force ranges from 40 to 160 kN. This product...

Read More »
Hose Clamps

Qosina Extension with Flow Controller

Edgewood, NY, April 10, 2007 - Qosina is pleased to add a new Extension Set with Flow Controller (Part # 17549) to our inventory. Our 15 inch long extension set is built of PVC tubing with a polycarbonate flow controller bonded within the tubing length. The ABS male luer and PVC female luer are bonded on the tubing ends. Each luer has a polyethylene cap. The flow controller's clearly marked...

Read More »
Pin Clamps target robotic assembly applications.
Hose Clamps

Pin Clamps target robotic assembly applications.

Featuring vanadium carbide coating on pin for resistance to wear, Pin Clamps are suited for applications where 2 parts must be held together in alignment while assembly is performed. Power Lock cylinder is spring-actuated to close and air-driven to open. Load check mechanism with switch confirms panel is present on actuator, eliminating need for external sensing devices. Various configurations...

Read More »
Tubing Clamps come in three distinct styles.
Hose Clamps

Tubing Clamps come in three distinct styles.

Offered in stainless steel and zinc plated carbon steel, OetikerÂ-® ear type clamps breathe to adapt to expansion and contraction while remaining secure and tamper-proof. Stainless steel worm gear clamps, also available, install by screwdriver tightening. Lined version is available for use with very soft tubing. Manufactured from UL-listed black nylon 6-6, Kwik Clamps(TM) will not rust or...

Read More »
V-Band Couplings for Filter and Exhaust Applications
Hose Clamps

V-Band Couplings for Filter and Exhaust Applications

Wadsworth, OH (August 2006) Clampco Products, Inc., a Wadsworth-based manufacturer of stainless steel T-bolt clamps and V-band couplings, offers its line of V-band couplings to original equipment manufacturers in the heavy duty filtration and exhaust markets. Clampco's V-band couplings are engineered to meet the exact specifications for each product application. The V-band couplings, also called...

Read More »
Hose Clamps

Flanged Connector Clamps come in metric bore combinations.

Bores of Flanged Connector Clamps are machined and designed for construction tubings GN 990 or DIN 2391, DIN 2395, and DIN 2462. They are made of stainless steel, or aluminum with matte shot-blasted finish or black powder coat finish. Hexagon nuts are available either zinc-plated or in stainless steel to suit screws. Clamps may be ordered with socket cap screws, hex cap screws, or adjustable...

Read More »

All Topics