Hinges

Plastic Hinges feature integrated safety switch.
Hinges

Plastic Hinges feature integrated safety switch.

Available in metric sizes, EN 239.6 Technopolymer Plastic Hinges with Integrated Safety Switch were designed for monitoring guard doors and covers of machines and production equipment. Opening door activates switch contacts, which then interrupts protective circuit via break contact and at same time signals door opening by closing make-contact element. Fitted with force-opening slow-action...

Read More »
Position Control Hinge delivers one-way motion.
Hinges

Position Control Hinge delivers one-way motion.

Holding solidly against gravity in downward direction while remaining upwardly adjustable, PHT Position Hinge offers alternative to prop rods or similar devices. One-way torque technology eliminates almost all torque required to move hinge in one direction without compromising holding force in other direction, and ReellTorq® clip technology ensures smooth, precise position control....

Read More »
Steel and Stainless Steel Hinges mount from inside door.
Fasteners

Steel and Stainless Steel Hinges mount from inside door.

Available in metric sizes, GN 129.2 Steel and Stainless Steel Hinges are used for doors that are flush with frame on outside. Once assembled, they cannot be unhinged. Being mounted from inside, hinges are especially suitable for doors and trap doors that must not be detachable from outside as anti-tamper device. Hinges are available in steel, with zinc-plated, blue passivated finish; American...

Read More »
Ball Shaped Door Catches come in metric sizes.
Catches

Ball Shaped Door Catches come in metric sizes.

Designed for shutter doors and sliding doors, RoHS-compliant EN 450 Ball Shaped Door Catches consist of catch bodyÂ- that is fixed to frame and ball that is fixed to door. Catch body is technopolymer plastic, Polyacetal POM, matte black, and ball is glass fiber reinforced plastic, matte black. Under specific tests, catch showed constant performances for more than 20,000 cycles. Also...

Read More »
Surface Mount Hinge withstands outdoor use.
Hinges

Surface Mount Hinge withstands outdoor use.

Available in 304 or 316 stainless steel withÂ- two finish options, N6 Surface Mount Hinge provides durability in corrosive environments. High gloss 316 stainless steel finish withstands salt and fresh water conditions, while basic 304 stainless steel passivated version is suitable for use indoors and out. Offered in 6 sizes with variety of hinge leaf configurations and optional covers, hinge...

Read More »
RoHS-Compliant Plastic Hinges integrate monitoring switch.
Hinges

RoHS-Compliant Plastic Hinges integrate monitoring switch.

Available in metric sizes, EN 239.4 Plastic Hinges with Integrated Switch are designed for monitoring guard doors and covers of machines and production equipment. Integrated design, which features ultrasonically welded enclosure, makes hinges compact andÂ- tamper-proof and facilitates mounting. While hinges are matte black glass fiber reinforced plastic, hinge pins are 303 stainless...

Read More »
Plastic Hinges feature stable and torque resistant design.
Hardware

Plastic Hinges feature stable and torque resistant design.

Available in metric sizes, EN 222 Technopolymer Plastic Hinges feature RoHS-compliantÂ- construction as well as resistant torque of 3 Nm in 4 indexing positions. After testing with 20.000+ opening and closing cycles, resistant torque value remained unchanged. Hinges are made of matte black glass fiber reinforced plastic (Polyamide PA), and hinge pin is 303 stainless...

Read More »
Hinges

Stainless Steel and Aluminum Hinges are designed to be weldable.

Available in interchangeable metric and inch sizes from 60–180 mm (2.36–7.09 in.) long, GN 128.2 Stainless Steel or Aluminum Weldable Hinges are RoHS-compliant and feature hinge pin retained in lower half. Hinges are manufactured from drawn weldable profiled stainless steel or aluminum extrusions. Materials include American Standard 304C15 cast stainless steel, American Standard Series 316...

Read More »
Plastic Hinges offer 5 mounting options.
Hinges

Plastic Hinges offer 5 mounting options.

Available in metric sizes, EN 237.1 Plastic Hinges offer variety of mounting options, including 2 x 2 bores for countersunk screws, 2 x 2 bores for socket head cap screws, 2 x 2 threaded bolts, 2 x bore for countersunk screws/2 x threaded bolts, and 2 x bore for socket head cap screws/2 x threaded bolts. RoHS-compliant units are constructed with black glass fiber reinforced plastic body,...

Read More »
Display Fastening System uses aluminum profiles and connectors.
Miscellaneous Fasteners

Display Fastening System uses aluminum profiles and connectors.

With aluminum profiles, connectors, hinges, and accessoriesÂ- for FOGA® Exhibit and Display Fastening System, radii can be created to accommodate curvature of almost any inside, outside, or arch radius application without causing profile deformation. Infinitely variable 360° Hinge permits displays to swing through 360° arc without diminishing strength of fastening system....

Read More »
Dies & Stamping Services with Over 25 Years of Experience
Sponsored

Dies & Stamping Services with Over 25 Years of Experience

PDS is an established leader in progressive die stamping, with a reputation for providing precision and value that dates back more than half a century. Through extensive capabilities and a staff of seasoned professionals, we set the standard for quality, delivering flexible services that can meet the needs of the most challenging requirements. See our video to learn more.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers