Hinges

Hardware

Weld-On Hinges suit tight-fitting situations.

Eliminating need for fasteners and leaves, Weld-On Hinges provide precise, smooth operation. Steel, stainless, and aluminum products come in 12 stock sizes with available options for fixed pin, fixed pin with grease fitting, or removable pin hinges. With degree of fit that results in minimal sag, hinges are suited for applications that range from cab enclosures to cabinets and toolboxes, safes,...

Read More »
Hinges safely secure strip doors.
Hinges

Hinges safely secure strip doors.

Save-T Loc hardware locks Rip-A-Strip replacement strips into place. Save-T Loc installation is accomplished by mounting hardware to door jamb, placing pre-punched PVC strips on hardware pins, and then locking Save-T Loc retainer bar over pins. Available in header, wall, and universal mount, hardware comes galvanized and is also available in stainless steel and aluminum. It accommodates strip...

Read More »
Hinges

Continuous Hinges come in 2 types of aluminum.

Made of 3003 series alloy, AL Series is available in .040, .050, and .060 in. leaf thicknesses with .50 in. knuckles. Hinges are suited for applications being machined or put through secondary processes. Standard 5052 alloy AA Series is offered in similar sizes but used primarily in military spec applications.

Read More »
Door Hinges are offered in various styles.
Hinges

Door Hinges are offered in various styles.

Constructed with dual shear points for increased strength, Precision Hinges feature fully concealed dual thrust and needle bearings for smooth motion under large loads. Non-removable, hardened steel hinge pins ensure safe, secure fit. Hinges are available for 4-fold and swing door systems for commercial, industrial, security, and custom applications.

Read More »
Hinges permit 180 degrees of free-swinging motion.
Hinges

Hinges permit 180 degrees of free-swinging motion.

Offered in 2 classes, Free-Operating Hinges handle axial and radial working loads from 270-1,120 lb-ft. Fixed-installation EH Class accommodates doors and frames that are on same plane. Extended offset hinge style permits full-door opening in applications where cabinets or enclosures are tightly configured. Door-removal, corner-hinge style KH Class fits virtually flush into corner bend of formed...

Read More »
Hinges

Flexi-Hinge Devices come in single- and double-end types.

Flexi-Hinge(TM) devices in S99FXS and S99FXD Series utilize crossed springs made to exacting tolerances of 400 series stainless steel, capsuled in cylindrical housing, to provide angular travel up to ±30°. Without requiring lubrication, frictionless products can function at limited angular travels indefinitely and are self-centering when unloaded. Zero backlash units come in ODs from...

Read More »
Spring Hinges keep lids and doors open or closed.
Hinges

Spring Hinges keep lids and doors open or closed.

Available in 7 models, spring hinges are designed for surface or concealed mounting, with or without holes, in sizes from 1.25-5.00 in. long and .025-.050 in. thick. Loaded to spring open or closed, products are available in plain and stainless steel. They are also available with zinc finish and include custom butt and continuous spring hinges made to individual specifications.

Read More »
Constant-Torque Hinges position objects through 360°.
Hinges

Constant-Torque Hinges position objects through 360°.

Models MH20 and MH40 control rotational motion, delivering useful life of 20,000 cycles with no backlash and typical spring-back of less than 1°. Available in load capacities from 1.7-36.5 lb-in., hinges feature corrosion-resistant, plastic housings; outside housing diameters of 0.591 and 0.394 in.; and overall lengths of 1.398 and 1.149 in. Applications include office equipment, medical...

Read More »
Concealed Hinges control motion and position objects.
Hinges

Concealed Hinges control motion and position objects.

Utilizing C-shaped clips that grip hardened steel shaft, hinges provide constant torque throughout full range of motion. With housings and connecting flanges precision cast from zinc, products deliver useful life of 25,000 cycles with no backlash and typical spring-back of less than 1°. Hinges with 5 and 7 mm outside housing diameters are available with consistent torque ratings from...

Read More »
Latch Hinges come with spring-loaded, chamfered pins.
Hinges

Latch Hinges come with spring-loaded, chamfered pins.

Doors mounted with latch hinges can be secured in place and removed. Suitable for applications with limited swing, they provide alternative to slip joint hinges. Four standard sizes are offered, ranging from 7/8-2Â-¾ in. long and 0.04, 0.05, 0.062, 0.125, and 0.187 in. thick. Latch hinges are available in stainless or zinc-plated steel, with or without holes, left and right handed. Optional...

Read More »
Precision Fabricating with Over 40 Years of Experience
Sponsored

Precision Fabricating with Over 40 Years of Experience

Quality Sheet Metal specializes in delivering precision, value, and customer service. With a client base that spans many diverse industries and a reputation for excellence that goes back over four decades, our clients know that we can provide the optimal combination of value and flexibility regardless of the challenge. See our video to learn what we can do for you. Through investments in state-of-the-art design, manufacturing, and quality control systems, Quality Sheet Metal remains focused on maintaining a high standard of quality, customer service, and competitive pricing. With an emphasis on customer satisfaction, Quality Sheet Metal is dedicated to establishing long-term partnerships, similar to the ones they currently have with their valued clients. If you're looking for a new partner with extensive capabilities in sheet metal fabricating and finishing, look no further.

Read More »

All Topics