Insertion Heaters are split along length of cartridge sheath.
Heaters

Insertion Heaters are split along length of cartridge sheath.

Model SST has single split sheath, with 2 sections that expand outward. QST, or Quad model has additional sections that expand outward in 4 directions. Both have single-circuit design, provide sheath temperatures up to 1400°F, and watt densities up to 100 W/sq in. Heaters have Incoloy® sheath and ceramic bushing under potting cap providing isolation of connector. SST ranges from 3/8...

Read More »
Immersion Heaters warm up liquids in tanks and drums.
Immersion Heaters

Immersion Heaters warm up liquids in tanks and drums.

Over-the-Side heaters are suitable for heating clear, opaque, or hard-to-heat liquids ranging from water to raw crude. Heaters are available in many configurations with capacities from 8 to 120 kW and lengths from 21 to 124 in. They have welded incoloy heating elements that resist corrosion, sealed terminals, and welded spacers. Heaters may be removed for cleaning or repairs.

Read More »
Water Heater and Booster are made of stainless steel.
Water Heaters (HVAC)

Water Heater and Booster are made of stainless steel.

Indirect Water Heater and Booster maintain hot water temperature with heat loss of under 1/2° per hour. This is made possible via 2 in. CFR Flame Retardant soft foam insulation. Reinforced stainless steel tank base eliminates pressure stress on tank bottom. Aquastat control (thermostat) sits within well space, which enables replacement if tank needs to be drained. Construction includes...

Read More »
Photoresist Oven allows automated handling of 300 mm wafers.
Heaters

Photoresist Oven allows automated handling of 300 mm wafers.

Company's 300mm Automated Photoresist Bake Oven offers 2 Front-Opening Unified Pod (FOUP) loadport stations with atmospheric Class 1 clean room-compatible robots and optically based Class 1 laser cassette mapping sensors. Its 2 heat treatment chambers hold 25 wafers each during photoresist bake cycle. Temperature uniformity is +/-1.5 deg C at 95 deg C operating temperature (150 deg C max). It...

Read More »
Coil Heater compensates for thermal expansion.
Tubular Heaters

Coil Heater compensates for thermal expansion.

Wedge locking, injection-nozzle heater, with clamping band, allows heating element to maintain full clamping force at elevated temperatures. Rectangular profile of heating element increases surface contact of heater and injection nozzle. Flexible element extensions terminate to Teflon(R) leadwires with moisture-resistant seals. Resistance tolerance is +/-2%. Standard sizes are 0.750 in. ID and...

Read More »
Chromatography Media

HPLC Detector and Column Oven can be operated remotely.

Series 200 Liquid Chromatography (LC) product line includes Diode Array-based Liquid Chromatography (HPLC) Detector and Peltier Column Oven with integrated column selection valve. Diode Array Detector allows secure transmission of chromatographic and spectral information over networking systems. HPLC Column Oven provides precise temperature control. Both may be controlled from local PCs or...

Read More »
Zone Heater provides uniform platen temperature.
Heaters

Zone Heater provides uniform platen temperature.

Maxi-Zone High Temperature Insertion Heater heats large platens for hot metal presses requiring continuous sheath temperatures to 2000 deg F. It provides 2 or 3 independently-controlled temperature zones along heater sheath, for better control over hot metal forming processes. Heater is available in lengths from 8 to 172 in., and diameters from 0.685 to 0.935 in., for nominal platen passages from...

Read More »
Hot Box safely heats eight 55 gallon drums.
Drum / Pail Heaters

Hot Box safely heats eight 55 gallon drums.

Sahara horizontal Hot Box Model S8 uses steam up to 200 psig, and can reach temperatures up to 300 deg F. Constructed of 304 stainless steel, Hot Box replaces homemade hot rooms and band heaters. It provides 110 gallon spill-containment capacity. Alternative capacities, electric model, and carbon-steel construction are also available.

Read More »
Heaters have built-in sensors.
Flexible Heaters

Heaters have built-in sensors.

Thermofoil(TM) heater/sensors combine etched foil heater properties with RTD or thermistor temperature sensor. Kapton heater insulation allows operation to 150 deg. Models are available in sizes to 5 x 5 in. with resistance options to match most applications. Sensor choices include 100 and 1000 ohm platinum RTDs and 50,000 ohm NTC thermistors. Applications include designers who are creating...

Read More »
Heaters mount vertically, horizontally, or on angle.
Heaters

Heaters mount vertically, horizontally, or on angle.

Doorjet Heaters resist wet, corrosive environments found at loading docks and platforms of industrial plants and warehouses. They offer stainless steel parts including casing with reinforcing angle rings; prewired, sealed, control box; and burner baffle. Able to heat door openings up to 12 x 12 ft, models are available with input ratings from 550,000 to 950,000 BTUH. Heaters operate on natural...

Read More »
How SpinSelect Can Save You Time and Money
Sponsored

How SpinSelect Can Save You Time and Money

Thanks to the unique SpinSelect™ Multi-Pocket selectable quick change tool holder, it's time to rethink the range, complexity and volume of parts that your lathe can produce. Our Spin-Select™ tool was created to increase productivity and consistency by decreasing downtime associated with lathe cutting tool and insert setups or changeovers. This product is a game-changer for the industry and we're pleased to show you why.

Read More »

All Topics