Heaters have built-in sensors.
Flexible Heaters

Heaters have built-in sensors.

Thermofoil(TM) heater/sensors combine etched foil heater properties with RTD or thermistor temperature sensor. Kapton heater insulation allows operation to 150 deg. Models are available in sizes to 5 x 5 in. with resistance options to match most applications. Sensor choices include 100 and 1000 ohm platinum RTDs and 50,000 ohm NTC thermistors. Applications include designers who are creating...

Read More »
Heaters mount vertically, horizontally, or on angle.
Heaters

Heaters mount vertically, horizontally, or on angle.

Doorjet Heaters resist wet, corrosive environments found at loading docks and platforms of industrial plants and warehouses. They offer stainless steel parts including casing with reinforcing angle rings; prewired, sealed, control box; and burner baffle. Able to heat door openings up to 12 x 12 ft, models are available with input ratings from 550,000 to 950,000 BTUH. Heaters operate on natural...

Read More »
Cartridge Heaters are available with abrasion protection.
Cartridge Heaters

Cartridge Heaters are available with abrasion protection.

Watt-Flex(R) cartridge heaters have split-sheath construction, which allows each half of heater to expand independently when energized, maximizing metal-to-metal contact with surrounding bore. Continuous-coil design eliminates cold spots between sections, producing uniform temperature profile. Heaters are available in standard dia of 1/4 to 1 in., as well as 8 to 20 mm; in lengths from 1 1/4 to...

Read More »
Infrared Heaters

Infrared Heaters resist wet and corrosive environments.

Suntube gas infrared tube heaters are fabricated from premium grade stainless steel, including burner/blower enclosures, combustion chamber, heat exchanger and heat directing efficient reflectors. Systems operate on natural gas or LP/propane gas, and are environmentally safe. Straight and U-tube models are available with 40,000 to 200,000 BTUH inputs, with tube lengths from 10 to 70 ft.

Read More »
Electric Baseboard Heaters are CSA approved to UL standards.
Baseboard Heaters (HVAC)

Electric Baseboard Heaters are CSA approved to UL standards.

BAI/BASI Series architectural heaters provide large amounts of quiet heat where fan noise is distracting and unacceptable. Constructed of heavy gauge steel, units are available up to 4 kW. BII/BISI Industrial heaters are constructed of heavy gauge, painted steel with screw assembly for additional strength and are available up to 2.5 kW. BCI/BCSI commercial heaters feature aluminum cover with...

Read More »
Cabinet Heaters mount anywhere.
Heaters

Cabinet Heaters mount anywhere.

Ranging from 2-24 kW, CUI Series heaters may be mounted on floor, wall or ceiling, or recessed into wall or ceiling. Standard voltages include 208, 240, 277 and 480, with other voltages available. Lengths range from 28-80 in., depending on kW and voltage. Extruded aluminum grille discourages tampering with finned, tubular heating element. Controls include built-in automatic reset thermal cutout...

Read More »
Fuel Gas Heaters warm up natural gas.
Heaters

Fuel Gas Heaters warm up natural gas.

Skid-mounted heaters preheat natural gas to keep it above dewpoint before combustion. They are prewired for ease of installation and are available for Class 1, Div 1 or 2 locations. Heaters have low watt density for long life, digital temperature control using silicon controlled rectifiers to maintain tight temperature, and are well insulated for low heat loss. They produce no emissions and are...

Read More »
Cartridge Heaters

Cartridge Heater warms up small parts.

Small and Mighty 1/8 in. dia cartridge heater can be used to heat small parts, torpedo systems and manifolds. High watt density heater uses 24 to 240 Vac supply voltage, avoiding use of transformers. It has MgO core in 321 stainless steel sheath with hermetically sealed welded end. Options include swaged-in or crimped lead wires in Teflon® or fiberglass insulation.

Read More »
Infrared Heaters

Heaters are designed for vacuum systems.

Internal Infrared Heaters are infrared lamps available in 2,000 W and 6,400 W units. They are mounted inside vacuum chamber allowing for efficient heating of internal components that are removed from chamber wall. Heaters feature quartz bulbs, quick release sockets, and nickel reflector shield. They are powered by 2 quick-connect in-vacuum bakeable cables (optional) and 2 12 kV baseplate...

Read More »
Hot Room heats totes.
Heaters

Hot Room heats totes.

Sahara 6-tote Hot Room can heat up to 6 totes; each tote has one 4 in. port hole for hose. It us suitable for pumping from totes, and its smaller access doors provide access to make connections to pumps without having to open larger doors. Steam or electrically heated, Hot Room features spill containment capacity, temperature control and stainless steel or carbon steel construction.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers