Water Heaters (HVAC)

Water Heaters feature dual O-ring system.

BoilerMate(TM) Series tanks have seamless inner corrosion-proof, nonmetallic, polyethylene reservoirs, and CFC-free molded insulation. Dual O-Ring Sealing System for WH-7 and WH-9 Series water heaters provides second seal that protects interior section of water heaters. Dual O-ring offers confirmation of seal and guards against future leaks. If seal is not secure, second O-ring inhibits internal...

Read More »
Water Heater Module mounts to wall.
Water Heaters (HVAC)

Water Heater Module mounts to wall.

DHW Green Hot Water Heater Module, for domestic hot water heating, eliminates cold showers when connected to hydronic boilers. Capacity range is 75,000-400,000 Btu/hr, with up to 1,000,000 Btu/hr available when full boiler hot water heating and fast recovery are required. System module includes heat exchanger, pumps, hand and balancing valves, temperature gauges, control interface and electrical...

Read More »
Immersion Heater supplies temperatures to 2100°F.
Immersion Heaters

Immersion Heater supplies temperatures to 2100°F.

Impervious to aluminum disassociation, ceramic-sheathed heater design provides corrosion protection, abrasion resistance, and non-conductive qualities. Product includes NiChrome heating wire, rated 2100°F, and ceramic sheath composed of SiAlON tubing that withstands temperatures to 3100°F. Zoned construction allows for multiple coil configurations, which can provide multi-zone heating...

Read More »
Water Heaters (HVAC)

Water Heaters have dual O-ring sealing system.

Indirect-fired Series WH-7 and WH-9 BoilerMate(TM) Classic incorporate sealing system which provides second seal that acts as backup for protection of interior section of water heaters. Sealing system disperses water that leaks down exterior sides of water heater if seal is not secure and inhibits internal water heater damage caused by internal leaks. Products use seamless inner corrosion-proof,...

Read More »
Water Heaters (HVAC)

Gas Water Heater/Boiler provides installation flexibility.

Commercial Copper-Fin II provides 990,000-2,070,000 Btu/hr and 85% (water heater) and 84% (boiler) efficiency. Unit incorporates independent dual-ignition systems, gasketless heat exchanger, and multiple referenced gas valves. Multiple blowers maintain proper airflow, while built-in sequencer automatically controls each function. With 7 venting options, multi-stack frame unit has fan-assisted...

Read More »
Water Heaters (HVAC)

Gas Water Heater can be used in negative air conditions.

With fully condensing, sealed combustion chamber, tank type TurboCharger(TM) is suited for tight mechanical rooms. Unit offers direct vent design, which draws all combustion air from outside and vents all byproducts outdoors. Submerged combustion chamber, premix power burner, and triple pass flue system create thermal efficiencies to 98%. Single model configuration is offered with storage...

Read More »
Blower Heaters offer high pressure air flow.
Heaters

Blower Heaters offer high pressure air flow.

SuperDragon portable electric heaters are available in 30, 48, and 60 kW models. Maximum outlet temperature is 180°F with fans that are field-adjustable from 1100-2700 cfm. SuperDragon can heat rooms to 130°F without need for ducting and will operate in room maintained at 130°F. Units include drip-proof motor, 2 thermostats, 10 in. pneumatic tires, control transformer, and...

Read More »
Hot Water Tanks add storage to existing water heaters.
Water Heaters (HVAC)

Hot Water Tanks add storage to existing water heaters.

StorageMate(TM) insulated tanks are offered in 41, 80, and 119 gallon models. Smallest model utilizes dense, polyethylene liner, while larger models are constructed of stainless steel. Tanks can function as recirculating aquaboosters with tank-less coils, hydronic buffer tanks for low-mass boilers and radiant systems, and as additional storage. Optional mechanical aquastats control temperature....

Read More »
Immersion Heaters suit process industries.
Immersion Heaters

Immersion Heaters suit process industries.

Immersion Heaters are offered in screw-plug, flange, and over-the-side styles to accommodate virtually any solution, including acids, plating chemicals, food products, and molten sand baths. Units feature MgO heating elements; NEMA moisture- or explosion-resistant enclosures; copper, steel or Incoloy sheath; welded construction; and operating temperatures to 1,600°F. Thermostatic controls,...

Read More »
Infrared Tube Heaters suit indoor and outdoor installations.
Infrared Heaters

Infrared Tube Heaters suit indoor and outdoor installations.

Series TLP is CSA certified for vented and unvented operation and 80% thermally efficient. Burner inputs are 50,000-200,000 Btu for natural and propane gas models. Radiant heat transfer is enchanced through use of heat-treated aluminized steel tubes. Side panels can be slid down or removed completely for access to controls from either side of unit. Gas valve rotates 180°, and sealed burner...

Read More »
Sponsored

Simple Connection MGB with EtherNet/IP

The new MGB with EtherNet/IP is a leap forward in access door safety. Designed for easy installation, flawless performance, and long service life, it is engineered with robust features and cutting-edge technology that places it firmly at the leading edge of the door safety device industry. To learn all about the benefits of the Euchner MGB, see our video.

Read More »

All Topics