Transparent Heater utilizes ITO technology.
Flexible Heaters

Transparent Heater utilizes ITO technology.

With no wires in clear view area, 78000 Series heater uses Indium Tin Oxide (ITO) technology to allow for maximum visible light transmission (VLT). Used to warm LCD panels found in cold, moist environments down to -40Â-ºF, it offers 85-90% VLT when applied to application. Features include transparent, pressure-sensitive adhesive; electrically-conductive transparent film; optical grade,...

Read More »
Water Heater eliminates need for storage tank.
Water Heaters (HVAC)

Water Heater eliminates need for storage tank.

Safety Shower Water Heater System provides required volume of precisely heated water in any ambient condition, without heated storage tanks. Skid-packaged unit utilizes Constantemp Feedforward Steam Hot Water Heater that is accurate to ±3°F. Continuous recirculation maintains water temperature and prevents lines from freezing. Capacities to 120 gpm are available.

Read More »
Swaged Cartridge Heaters suit high-temperature applications.
Cartridge Heaters

Swaged Cartridge Heaters suit high-temperature applications.

Suited for applications with temperatures up to 1,500°F, heaters have swaged alloy sheaths with diameters that are sized for precision fit into drilled holes, providing max heat transfer. Lead configurations include stainless steel braid and stainless steel armor for protection in hostile environments, and can be adapted to 90° angles. Heaters are available with UL and CUL component...

Read More »
Duct Heaters range from 6-480 kW.
Duct Heaters

Duct Heaters range from 6-480 kW.

Series IDH utilizes heavy-duty incoloy heating elements, which allow air temperature up to 800°F. Flange lengths range from 5 5/8-15 5/8 in. Heaters include stainless steel frame, potted terminals, and moisture resistant terminal housing. They are suited for applications where high temperature air is required, such as ovens, dryers, rotary gravure presses, and heat treating.

Read More »
Indirect Fired Water Heater is available in four sizes.
Combustion Heaters (HVAC)

Indirect Fired Water Heater is available in four sizes.

Porcelain (glass) lined Alliance G combines longevity and corrosion-resistance of porcelain enameled tank and coil with heat recovery of indirect fired water heater. Each tank is surrounded by CFC-free foam insulation and includes aquastat, clean out inspection plate, and sacrificial anode rod. Product is wrapped in steel jacket (40 and 50 gal sizes) or plastic jacket (79 and 100 gal sizes).

Read More »
Infrared Heating Tool shrinks heat-shrink tubing.
Infrared Heaters

Infrared Heating Tool shrinks heat-shrink tubing.

Glo-Ring handheld tool heats without blowing hot air and operates silently. Quartz elements, available in sizes from ½ to 3 in. OD, open and close to surround work piece for quick and even heating. Custom elements are available for unique shrinking requirements. Glo-Ring is CE certified to meet all applicable EU safety standards.

Read More »
Energy System is rated up to 356 kW.
Power Systems

Energy System is rated up to 356 kW.

Model ENI 415 is a combined heat and power, on-site energy system with pre-engineered packaged design for indoor or outdoor installations. It can support peak and full load requirements, providing full power in event of utility outages. System is suited for base load and waste heat utilization applications. Waste heat applications can provide both chilled and hot water, enabling commercial and...

Read More »
Power Systems

Energy System meets stringent emissions requirements.

Model ENE 210 combined heat and power, on-site energy system features cooled exhaust, gas recirculation engine technology. Pre-engineered packaged design can be installed indoors or outdoors. System is suited for base load power applications. Additional system efficiency can be gained by utilizing system's waste heat. Waste heat applications can provide hot water, enabling commercial and...

Read More »
Electric Unit Heater ranges in size from 3-10 kW.
Heaters

Electric Unit Heater ranges in size from 3-10 kW.

Series UHI comes with built-in controls and can be wall or ceiling mounted. Standard voltages include 208, 240, 277, and 480 in single and 3-phase. Cabinets are heavy gauge galvanized steel and tubular elements are 304 SS. Individually adjustable louvers direct airflow where needed. Single point, line voltage connection enables heater, fan, and controls to be connected to same branch circuit....

Read More »
Circulation Heater suits limited space applications.
Circulation Heaters

Circulation Heater suits limited space applications.

VERSALINE 500 offers high watt density, in-line heating. Compact chamber assembly includes agency approved FIREROD® heater, inlet/outlet lines, high-limit thermocouple sensor, and tubing. It handles flow rates from 1-13 cfm and pressures to 80 psi. FIREROD heater offers max operating temperature of 1400°F. VERSALINE 500 is suitable for analytical fluid warming, medical equipment, and...

Read More »
Sentry Equipment Introduces New Compact Hygienic Automatic Sampler
Sponsored

Sentry Equipment Introduces New Compact Hygienic Automatic Sampler

As a leader in industrial sampling equipment at Sentry Equipment, our success is built on a history of innovation and designs that epitomize value and efficiency. The new Hygienic Automatic Sampler is another example of our dedication to developing quality engineered products. To learn how this product can streamline the sampling process for dry, free-flowing materials, see our new video.

Read More »

All Topics