Modulating Unitary Heater optimizes combustion.
Infrared Heaters

Modulating Unitary Heater optimizes combustion.

VANTAGE® MODULATING Heater provides optimal fuel efficiency by adjusting both fuel and combustion air. Burner modulation can be under automatic or manual control to suit different applications. Available in natural gas or propane, unit features comprehensive on-board diagnostics for fault and system status and hot surface electronic ignition control. Protective enclosure for controls...

Read More »
Infrared Water Heater eliminates fluid contamination.
Infrared Heaters

Infrared Water Heater eliminates fluid contamination.

Ultrapure Water Heater consists of quartz glass twin-tube IR emitter enclosed by larger quartz glass tube with internal gold coating. Offering heating efficiencies exceeding 95%, halogen-free unit can be fit in-line and achieves temperature rises to 80°K depending on liquid throughput and emitter arrangement. Power rating is 6.3 kW for heated length of 600 mm, but heated lengths up to 2 m are...

Read More »
Infrared Heaters

Shortwave IR Emitters produce 0.9-1.6 microns max.

Featuring back-mounted gold reflector, Shortwave Infrared Emitters offer heated lengths from 1-120 in., infinitely adjustable control, and linear power up to 400 W/in. They require practically no heating-up or cooling down times. With tube format of 23 x 11 mm, twin tube units feature filament temperature from 1,800-2,200°C and are designed for horizontal operation. They can be 1-side or...

Read More »
Flash Dryers

Carbon Emitters utilize infrared heating technology.

Suitable for all medium-wave applications, Carbon Emitters match temperatures to optimum absorption wavelength for each application, eliminating overheating and contamination of sensitive substrates. Standard units provide max output of 2.5 Â-µm, while High Power Carbon Emitters produce 3 µm. At irradiation of 120 W/in.², effective power density is 28 W/m². Units can...

Read More »
Gas Heater adds heat to cold water pressure washers.
Other Process Heaters

Gas Heater adds heat to cold water pressure washers.

Operating on 120 or 240 V single-phase incoming power, HGM Series incorporates electronic ignition with pilot; 24 V control system; and on/off burner switch. Construction includes Â-½ in. schedule 80 vertical coil assembly, natural gas or LP-gas fired natural draft with aspirating-type burner, and draft diverter. Unit is fork truck accessible and provides inlet and outlet quick connects as...

Read More »
Tank Heaters can be installed horizontally or vertically.
Water Heaters (HVAC)

Tank Heaters can be installed horizontally or vertically.

Able to operate with water or steam on tubeside, U-Tube Tank Heaters are offered in 2- and 4-pass designs and can be installed in new or existing hot water tanks. Instantaneous heaters, ranging in size from 4-12 in. dia with lengths to 10 ft, feature cast iron heads, copper tubes and baffles, and steel tube sheets and bolting. Applications including service water, space heating, radiation, and...

Read More »
Infrared Heaters

Infrared Heaters suit drying and curing applications.

PanelIR Series reach 90% of operating temperature within 3 sec of cold start while radiant energy dissipates to 10% 5 sec after power is disconnected. Model 4554 uses tubular quartz lamps backed by ceramic reflector to provide heat for areas up to 38 x 12 in., while Model 4765 uses tubular quartz, T3-style halogen lamps with ceramic reflectors to heat areas up to 38 x 66 in. Mounting two or more...

Read More »
Blower Heater suits harsh environments.
Heaters

Blower Heater suits harsh environments.

Corrosion-resistant Model HD3D provides comfort heating and freeze prevention in harsh, corrosive, dirty, and wet environments. With stainless steel brackets, hose-down unit can be directly mounted to wall or ceiling. NEMA 4X control box is located on front of heater. Wiring connector provides watertight seal in event of replacement of motor, limit control, or elements. Heater is suited for...

Read More »
Make-Up Air Unit suits institutional applications.
Combustion Heaters (HVAC)

Make-Up Air Unit suits institutional applications.

Model IG-HV features power-vented, 80% efficient, indirect gas-fired furnace with post-purge cycle. It provides airflow volumes to 7,000 cfm with heating capacities up to 400,000 btu/hr input. Unit is supplied with double width, double inlet, forward curved blowers tested to AMCA standards. It offers 3 heating and ventilation options plus 8 economizer and mixing box options, and can be supplied...

Read More »
Precision Fabricating with Over 40 Years of Experience
Sponsored

Precision Fabricating with Over 40 Years of Experience

Quality Sheet Metal specializes in delivering precision, value, and customer service. With a client base that spans many diverse industries and a reputation for excellence that goes back over four decades, our clients know that we can provide the optimal combination of value and flexibility regardless of the challenge. See our video to learn what we can do for you. Through investments in state-of-the-art design, manufacturing, and quality control systems, Quality Sheet Metal remains focused on maintaining a high standard of quality, customer service, and competitive pricing. With an emphasis on customer satisfaction, Quality Sheet Metal is dedicated to establishing long-term partnerships, similar to the ones they currently have with their valued clients. If you're looking for a new partner with extensive capabilities in sheet metal fabricating and finishing, look no further.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers