Heater/Cooler protects electronics from extreme temps.
Equipment Coolers

Heater/Cooler protects electronics from extreme temps.

Available in 3 sizes to fit small-medium sized enclosures, ADALET Heater/Cooler protects electrical and electronic components from degradation due to high or low temperatures. It may be used to heat or cool full time, but can be adjusted to switch from heater to cooler using added thermostat controller. Featuring stainless steel design, unit is built to UL NEMA 4X, 12, and 13 standards; has few...

Read More »
Infrared Heaters

IR Heating Systems deliver true modulation capabilities.

CORAYVAC IR heaters equipped with ROBERTS GORDON ULTRAVAC Controls provide true modulating infrared systems. They enable users to modulate burner input rate with outdoor air temperature to match heating system input to building's heat requirement. Multi-feature zone temperature sensor provides localized control, while PC-based software package provides total heating system management from...

Read More »
Heated Parts suit high process temperature applications.
Miscellaneous Rods

Heated Parts suit high process temperature applications.

Available in materials such as stainless steel, nickel, Inconel®, aluminum, copper, and bronze, IFC (Interference Fit Construction) heated parts can customized into various shapes and sizes to meet end-user requirements. With FEA (Finite Element Analysis) or iterative prototyping process, heated parts can achieve thermal transfer and temperature uniformity equaling ±1%. All heated...

Read More »
Heating/Cooling System handles 200 and 300 mm wafers.
Heaters

Heating/Cooling System handles 200 and 300 mm wafers.

Heating/Cooling Module is BOLTS compatible for integration with standard wafer handling automation. It uses resistive heating elements to achieve better than 450°C heating in less than 15 sec. After processing, module rapidly cools wafer to allow safe return to FOUP. Backside particle and metals contamination is minimized through low contact wafer chuck.

Read More »
Gas-Fired Water Heater and Boiler have compact design.
Water Heaters (HVAC)

Gas-Fired Water Heater and Boiler have compact design.

Copper-Fin® products include combustible floor shield, low-profile draft hood, and electronic intermittent ignition. Boiler features 2-stage firing control system and automatic reset high limit, while water heater includes pump delay/freeze protection and manual/automatic reset high limit. Products also utilize copper finned-tube heat exchanger with gasketless design and cast-iron headers,...

Read More »
Gas Water Heater operates at 82% thermal efficiency.
Water Heaters (HVAC)

Gas Water Heater operates at 82% thermal efficiency.

Copper-Pak® Commercial Water Heater combines Copper-Fin® water heater with Lock-Temp(TM) hot water storage tank available in 85 and 100 gal capacities. All bronze, 1/6 hp circulating pump ensures scale-free heater performance. Built-in draft diverter is contained entirely within heavy-gauge, galvanized steel jacket assembly. Copper-Pak allows tank to be replaced separately from water...

Read More »
Water Heaters produce large volume hot water.
Water Heaters (HVAC)

Water Heaters produce large volume hot water.

With indirect heat exchanger and Incoloy sheathed electric heating elements, Indirect Water Heaters provide scale-free and corrosion-resistant operation. They are available with inputs from 30-330 kW, outputs from 98.3-1,081.1 mbh, and recovery capacities from 117-1,298 gph. Service water being heated circulates only through copper indirect heat exchanger within temperature range that eliminates...

Read More »
Catalytic Heater protects gas pipelines from freezing.
Infrared Heaters

Catalytic Heater protects gas pipelines from freezing.

HotCat consists of multiple catalytic infrared heaters that apply heat directly to heat exchanger. Surface area is expanded by doubling pipe diameter in heat exchanger, which maximizes heat transfer and slows flow of gas. Available with stainless steel construction and in 5 capacities from 2.1 million BTU to 160,000 BTU bottle units, HotCat can be installed, without clearance restrictions, in all...

Read More »
Flexible Heater utilizes stranded carbon fiber.
Flexible Heaters

Flexible Heater utilizes stranded carbon fiber.

Flexible Carbon Fiber Heater employs Sonicrimp sonic welding technology for solderless, lead-free electrical termination. It incorporates 7 micron carbon fiber strands into flat form, which is sealed in 3 mil Mylar or Kapton jacket. Able to withstand repetitive flexes and crease bending, product has thermoelectric properties that include ability to heat from 100-200°F above ambient with...

Read More »
Flexible Heaters come in Kapton® and silicone rubber.
Flexible Heaters

Flexible Heaters come in Kapton® and silicone rubber.

Flexible heating elements, with standard density of 5 W/sq in., meet application requirements in aerospace, medical, composite fabrication, optical equipment, and computers. Tear-resistant Kapton® heaters are 0.007 in. thick, measure up to 20 x 26 in., and handle temperatures from -319 to +392°F. Silicone Rubber heaters permit composite bonding and curing, as well as repair and...

Read More »
Triad's JSU Series of Power Supplies Provide Robust, Low Cost Solutions
Sponsored

Triad's JSU Series of Power Supplies Provide Robust, Low Cost Solutions

Triad Magnetics is an established leader in power supply innovation, offering product lines that span a wide range of diverse industries and applications. Adding to their long list of successful product launches, Triad announces the release of the new cutting-edge JSU Series of power supplies. To learn about all of its advantages and advanced features, see our video.

Read More »

All Topics