Infrared Heaters

Shortwave IR Emitters produce 0.9-1.6 microns max.

Featuring back-mounted gold reflector, Shortwave Infrared Emitters offer heated lengths from 1-120 in., infinitely adjustable control, and linear power up to 400 W/in. They require practically no heating-up or cooling down times. With tube format of 23 x 11 mm, twin tube units feature filament temperature from 1,800-2,200°C and are designed for horizontal operation. They can be 1-side or...

Read More »
Flash Dryers

Carbon Emitters utilize infrared heating technology.

Suitable for all medium-wave applications, Carbon Emitters match temperatures to optimum absorption wavelength for each application, eliminating overheating and contamination of sensitive substrates. Standard units provide max output of 2.5 Â-µm, while High Power Carbon Emitters produce 3 µm. At irradiation of 120 W/in.², effective power density is 28 W/m². Units can...

Read More »
Gas Heater adds heat to cold water pressure washers.
Other Process Heaters

Gas Heater adds heat to cold water pressure washers.

Operating on 120 or 240 V single-phase incoming power, HGM Series incorporates electronic ignition with pilot; 24 V control system; and on/off burner switch. Construction includes Â-½ in. schedule 80 vertical coil assembly, natural gas or LP-gas fired natural draft with aspirating-type burner, and draft diverter. Unit is fork truck accessible and provides inlet and outlet quick connects as...

Read More »
Seal Stuff In, Seal Stuff Out
Sponsored

Seal Stuff In, Seal Stuff Out

One of the best ways to make sure that your machinery stays up and running in the face of adversity is to make sure that it's properly sealed. Of course, it's not always easy to determine whether the integrity of your seals are up to par. How can you tell when you have a problem?

Read More »
Tank Heaters can be installed horizontally or vertically.
Water Heaters (HVAC)

Tank Heaters can be installed horizontally or vertically.

Able to operate with water or steam on tubeside, U-Tube Tank Heaters are offered in 2- and 4-pass designs and can be installed in new or existing hot water tanks. Instantaneous heaters, ranging in size from 4-12 in. dia with lengths to 10 ft, feature cast iron heads, copper tubes and baffles, and steel tube sheets and bolting. Applications including service water, space heating, radiation, and...

Read More »
Infrared Heaters

Infrared Heaters suit drying and curing applications.

PanelIR Series reach 90% of operating temperature within 3 sec of cold start while radiant energy dissipates to 10% 5 sec after power is disconnected. Model 4554 uses tubular quartz lamps backed by ceramic reflector to provide heat for areas up to 38 x 12 in., while Model 4765 uses tubular quartz, T3-style halogen lamps with ceramic reflectors to heat areas up to 38 x 66 in. Mounting two or more...

Read More »
Blower Heater suits harsh environments.
Heaters

Blower Heater suits harsh environments.

Corrosion-resistant Model HD3D provides comfort heating and freeze prevention in harsh, corrosive, dirty, and wet environments. With stainless steel brackets, hose-down unit can be directly mounted to wall or ceiling. NEMA 4X control box is located on front of heater. Wiring connector provides watertight seal in event of replacement of motor, limit control, or elements. Heater is suited for...

Read More »
Make-Up Air Unit suits institutional applications.
Combustion Heaters (HVAC)

Make-Up Air Unit suits institutional applications.

Model IG-HV features power-vented, 80% efficient, indirect gas-fired furnace with post-purge cycle. It provides airflow volumes to 7,000 cfm with heating capacities up to 400,000 btu/hr input. Unit is supplied with double width, double inlet, forward curved blowers tested to AMCA standards. It offers 3 heating and ventilation options plus 8 economizer and mixing box options, and can be supplied...

Read More »
Bin Heater helps control insect infestation.
Heaters

Bin Heater helps control insect infestation.

Suited for use in food industry, Hot Bin Heater enables spot heating in tight space situations such as bins and silos. Flexible hoses supply steam to heater's coil, and heated air is directed into space using flexible ductwork. Technology does not require shut-downs, promoting production rates while eliminating unwanted insects.

Read More »
Water Heaters provide instantaneous hot water.
Water Heaters (HVAC)

Water Heaters provide instantaneous hot water.

Flo-Rite-Temp Heaters utilize feed-forward principle of control, eliminating need for temperature sensing devices. Blending valve mounts directly on heat exchanger. Tube bundle features floating head design, which relieves tube stress and allows tubes to be removed for mechanical cleaning. Tubes are 16 ga Admiralty Brass and shell is carbon steel. Using 2-15 psig steam supply, Flo-Rite-Temp units...

Read More »
Dodge® Raptor Coupling Now Available in Three Larger Sizes
Sponsored

Dodge® Raptor Coupling Now Available in Three Larger Sizes

The Dodge Raptor coupling epitomizes the innovation and value that has made Baldor a world leader in industrial electric motors. For almost 100 years Baldor has been the go-to source for industries across the globe. The Raptor coupling is just one example of our dedication to engineered excellence and commitment to providing value and performance. See our video to learn more.

Read More »

All Topics