Heaters

Hot Oil Unit maintains accuracy of ±2°F.

Equipped with SPECK mag-drive seal-less pump, which produces flow of 20 gpm at 30 psi, BWA-STM-1220-HT High Temperature Hot Oil unit has max operating temperature of 550°F, uses Omron Controller. Closed loop system, equipped with 12 kw heater and heat exchanger, features Y-strainer and Omron PID dual digital readout controller. Other components include audible alarm and 1 gal expansion tank...

Read More »
The Most Advanced Infra-Red Heating System in the Industry!
Heaters

The Most Advanced Infra-Red Heating System in the Industry!

The HLV Series is the latest in infra-red technology. Engineered to utilize both two-stage and condensing technology, it offers optimal operating efficiencies and fuel savings. Key operational features include a 20% reduction in output when operating in low fire and stainless steel tailpipe when optional condensing operation is utilized. Infra-red output is optimized with highly polished aluminum...

Read More »
Infrared Heater offers flexible design options.
Infrared Heaters

Infrared Heater offers flexible design options.

Negative pressure VANTAGE® NP provides even heat distribution from vacuum design with uniform tube temperatures. With inputs from 40,000-200,000 Btu/h and tube lengths from 10-80 ft, heater is suitable for variety of building sizes. Burner box includes protective enclosure allowing minimal heat exposure to electrical controls. Heater can be designed as unitary model in straight, U-tube, or...

Read More »
Induction Heating System automates industrial brazing.
Induction Heaters

Induction Heating System automates industrial brazing.

Designed for open-air brazing and soldering in lean manufacturing environment, AB-1 occupies 5 x 6 ft footprint and includes 4- or 6-position indexing table. It can be configured with up to 3 brazing stations as well as robotic part loading and unloading. Front panel start/stop push buttons place system in PLC-controlled auto run mode, with full manual control available for process development....

Read More »
Air Handling Units provide 100% fuel efficiency.
Air Handlers

Air Handling Units provide 100% fuel efficiency.

Offered in air volumes from 1,000-60,000 cfm and inputs from 0.1-6.5 Mbtu/hr, direct-fired COMBAT® DF-Series provides multiple installation options, including indoor and outdoor as well as vertical and horizontal configurations. Galvanized steel heaters are available in natural gas or propane gas models with 30:1 fully modulating burner and double-width, double-inlet, forward-curved...

Read More »
Gas Heaters offer capacities from 40,000-250,000 BTU/hr.
Tubular Heaters

Gas Heaters offer capacities from 40,000-250,000 BTU/hr.

Available in natural and propane gas with tube lengths from 15-80 ft, LTS Series straight tube infrared heaters come in 19 models and in more than 100 different configurations. Corner reflectors and 90° elbows allow mounting near walls, doors, or corners. Certified for horizontal and vertical venting, heaters can be horizontally mounted for max 75 ft sidewall venting. They are also...

Read More »
Band Heaters

Ceramic Heater has ramp rate of up to 302°F per second.

Able to be operated up to 1,112°F, ULTRAMIC(TM) 600 features thermally conductive aluminum nitride ceramic composition paired with thermally matched heating element. Monolithic, geometrically stable structure exhibits minimal porosity and has integrated thermocouple configuration that optimizes reliability of sensor/heater interface. Product can be designed and manufactured in 2D flat or...

Read More »
Cartridge Heaters deliver 100 W/sq-in. at 120 or 240 V.
Cartridge Heaters

Cartridge Heaters deliver 100 W/sq-in. at 120 or 240 V.

Designed with ceramic cores and alloy tubing to maximize heat transfer, Hot Stix Cartridge Heaters feature high-purity magnesium oxide packing for even heat distribution. Heater leads can withstand temperatures up to 842°F. Hot Stix GP Heaters are suitable for most heating applications, while Â-¼ in. diameter IN Heaters are designed for internally heated nozzle applications, and TC...

Read More »
Kooltronic Now Offers Enclosure Heaters, Lights and Other Accessories
Electrical Equipment

Kooltronic Now Offers Enclosure Heaters, Lights and Other Accessories

May 9, 2006 - Kooltronic, Inc., of Pennington, NJ, announced that it will be offering a new line of state-of-the-art enclosure accessories. These include heaters, thermostats, lights, electronic relays, humidity controls and air-flow monitors. Enclosure heaters, in particular, have become more and more popular as they help add life to electrical enclosure components. Since an enclosure may be...

Read More »
Gas-Fired, IR Heater provides comfortable, gentle heat.
Infrared Heaters

Gas-Fired, IR Heater provides comfortable, gentle heat.

Available in natural gas or propane gas models, BANANZA® BH low-intensity unitary heater is ceiling-mounted to conserve floor space and employs parabolic reflector design that directs heat downward. Features include aluminized steel tubing and direct spark ignition. Offered in straight, U, or L configurations, heater is available with inputs from 40,000-200,000 BTU/h and tube lengths from...

Read More »
Precision Machining Solutions with Over 25 Years of Experience
Sponsored

Precision Machining Solutions with Over 25 Years of Experience

Quality, customer service, and unbeatable value are the hallmarks of Hogge Precision. Since 1989 we have built a reputation as the go-to precision machining source, servicing many demanding industries. For CNC machining and screw machining, there are few manufacturers that can match our capabilities and expertise. See our video to learn more.

Read More »

All Topics