Jasco's Featured Product at Pittcon 2009
Gas / Chemical Analyzers

Jasco's Featured Product at Pittcon 2009

Preparative SFC System with Chiral Detection JASCO's featured product at Pittcon 2009 will be the Preparative SFC system with chiral detection. Providing a versatile modular design and excellent performance, this system is the ideal solution for fast, reliable chiral separation and isolation. The heart of the system is JASCO'S patented back- pressure regulator, which allows control of system...

Read More »
Infrared Heaters

Pre-Heating Soundproof Sheets

Infrared Heat for Automotive Interior Parts By installing a carbon infra-red system to pre-heat acoustic soundproofing sheets prior to molding, Faurecia has significantly reduced production cycle times and virtually eliminated maintenance costs and machine down-time on one of its major molding machines. An essential part of the molding process is the pre-heating of the PE-EVA (polyethylene...

Read More »
Infrared Heaters

Infrared and the Auto Racing Industry

Keeping Tires at Their Optimum Operating Temperature An infrared heating system, developed by Tyre Technology, of Holmfirth, and using infrared heaters from Heraeus Noblelight, is helping to ensure that the tires of some of the cars taking part in the new A1 Grand Prix are at their optimum operating temperature at the start of every race. The system has already been used successfully by various...

Read More »
Flash Dryers

Infrared Heat For Lamination

IR Heaters Increase Quality of Chip Boards Fast response medium wave Infrared heaters for lamination A fast response, medium wave infrared drying system, from Heraeus Noblelight, is helping MFI to achieve improved quality control in the manufacture of laminated chip board. MFI produces laminated chipboard for worktops, kitchen surfaces and wardrobes. The process involves feeding the sheets of...

Read More »
Seal Stuff In, Seal Stuff Out
Sponsored

Seal Stuff In, Seal Stuff Out

One of the best ways to make sure that your machinery stays up and running in the face of adversity is to make sure that it's properly sealed. Of course, it's not always easy to determine whether the integrity of your seals are up to par. How can you tell when you have a problem?

Read More »
Flash Dryers

Drying For High-Speed Printing

CIR Heaters from Heraeus Noblelight Cut Energy Bills By using carbon infrared (CIR) emitters from Heraeus Noblelight to achieve the rapid print drying demanded by their high speed print heads, The Lettershop Group, of Leeds has achieved significant savings in energy and running costs compared with their previous short wave infrared system. As it is air-cooled rather than water-cooled, the new...

Read More »
Infrared Heaters

Infrared Helps Chocolate Keep Its Temper

Achieving Better Control of Quality of Candies Carbon infrared heating systems are helping Magna Specialty Confectioners to achieve better control over the quality of their filled chocolate products, as well as saving energy and space when compared with the previous chocolate heating system. Magna Specialty Confectioners make a wide range of chocolates, under contract, for most of the well-known...

Read More »
Infrared Heaters

Infrared Heaters Help Plastic Welding

Improving the Production Process An infrared welding system, using special-purpose infrared heaters from Heraeus Noblelight, has helped Hepworth Drainage to improve the quality of an inspection chamber assembly production process, while eliminating any environmental problems associated with a hot melt adhesive technique that was formerly used. Hepworth Drainage is one of the largest manufacturers...

Read More »
Flash Dryers

Infrared Provides Bumper Results @ Honda

Increasing Efficiency of Bumper Spray Painting An infrared oven, fitted with fast response, medium wave heaters, from Heraeus Noblelight is helping to increase the efficiency of the spray painting of vehicle bumpers at Honda of the UK Manufacturing Ltd. Bumpers are painted with three coats. First a prime coat is applied, which is flashed off in a warm air oven before being cooled. A base coat,...

Read More »
OK International to Show MD&M / Electronics West Visitors How to Drive Productivity in Diverse Applications
Soldering Machinery

OK International to Show MD&M / Electronics West Visitors How to Drive Productivity in Diverse Applications

OK International is preparing to take a wide range of innovative soldering and production assembly technologies to this year's MD&M West Show being held in Anaheim, CA over 10th - 12th February. Each system is designed to reduce training investment, perform a diverse array of applications and measurably increase productivity. OK International products on display at Booth 432 will include advanced...

Read More »
Infrared Heaters

Oscar Mayer Teams Up with Heraeus Noblelight - Ready Meals are Pre-Browned

Oscar Mayer manufactures a range of potato-topped and crumb-topped ready meals for major supermarkets and it is important, in terms of final presentation, that the products are pre-browned. By installing an oven using carbon infrared heaters Oscar Mayer has been able to eliminate previous maintenance problems, improve energy efficiency and liberate valuable floor space, at its food manufacturing...

Read More »
Precision Fabricating with Over 40 Years of Experience
Sponsored

Precision Fabricating with Over 40 Years of Experience

Quality Sheet Metal specializes in delivering precision, value, and customer service. With a client base that spans many diverse industries and a reputation for excellence that goes back over four decades, our clients know that we can provide the optimal combination of value and flexibility regardless of the challenge. See our video to learn what we can do for you. Through investments in state-of-the-art design, manufacturing, and quality control systems, Quality Sheet Metal remains focused on maintaining a high standard of quality, customer service, and competitive pricing. With an emphasis on customer satisfaction, Quality Sheet Metal is dedicated to establishing long-term partnerships, similar to the ones they currently have with their valued clients. If you're looking for a new partner with extensive capabilities in sheet metal fabricating and finishing, look no further.

Read More »

All Topics